Casio FX-CG10 Software User Guide - Page 308
Conditional Jump Relational Operators RELATNL, Receive / Send, Function, Syntax, Description
View all Casio FX-CG10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 308 highlights
Receive( / Send( Function: This command receives data from and sends data to a connected device. Syntax: Receive() / Send() Description: • This command receives data from and sends data to a connected device. • The following types of data can be received (sent) by this command. • Individual values assigned to variables • Matrix data (all values - individual values cannot be specified) • List data (all values - individual values cannot be specified) OpenComport38k / CloseComport38k Function: Opens and closes the 3-pin COM port (serial). Description: See the Receive38k/Send38k command below. Receive38k / Send38k Function: Executes data send and receive at a data rate of 38 kbps. Syntax: Send38k Receive38k Description: • The OpenComport38k command must be executed before this command is executed. • The CloseComport38k command must be executed after this command is executed. • If this command is executed when the communication cable is not connected, program execution will continue without generating an error. k Conditional Jump Relational Operators (RELATNL) Function: These relational operators are used in combination with the conditional jump command. Syntax: Parameters: • left side/right side: variable (A to Z, r, θ), numeric constant, variable expression (such as: A × 2) • relational operator 8-24