Casio FX-CG10 Software User Guide - Page 526
To con the time T value, To display plots on T-Y coordinates or T-X coordinates
View all Casio FX-CG10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 526 highlights
u To configure the time (T) value 1. While the plot list screen is displayed, press 5(SET). 2. On the screen that appears, specify the start value and step value. • If you want to specify a start value of 1 and a step of 1.5, for example, press bwb. fw. 3. After the settings are the way you want, press w (or J). • This returns to the plot list screen, where you can check whether the T-value has changed as you intended. Note The following are the ranges for the start value and the step value. -1.0E+10 < Start < 1.0E+10 0 < Step < 1.0E+10 u To display plots on T-Y coordinates or T-X coordinates 1. While the plot list screen is displayed, press 1(AXTRNS). From the Picture Plot screen, you also could press K6(g)1(AXTRNS). 2. Depending on the coordinate system you want to use to display the plots, press 1(T-Y) or 2(T-X). • This displays the AXTRANS screen, which shows the X-Y coordinate system plots on the left and the T-Y or T-X coordinate system plots on the right. 15-15