Casio FX-CG10 Software User Guide - Page 556

ε-11 Using Advanced Setup Note • When you select a channel on the Channel Setup screen, the sampling range of the selected channel appears in the bottom line of the screen. In the above example, the range of the temperature sensor assigned to CH2 appears on the display. If the sampling range value is too long to fit on the display, only the part of the value that fits on the display will be shown. k Sample Setup The Sample Setup screen lets you configure a number of settings that control sampling. • To configure Sample Setup settings 1. While the Advanced Setup menu (page ε-8) is on the display, press c(Sample). • This displays the Sample Setup screen, with the "Mode" line highlighted, which indicates that you can select the sampling mode. 2. Select the sampling mode that suits the type of sampling you want to perform. To do this: Graph data in real-time as it is sampled Perform sampling of high-speed phenomena (sound, etc.) Perform sampling over a long time (weather, etc.) • The EA-200 enters a power off sleep state while standing by. Sample sound using the EA-200's built-in microphone Record the time of the occurrence of a particular trigger event as an absolute value starting from 0, which is the sampling start time Perform periodic sampling, from a start trigger event to an end trigger event Perform sampling other than that described above Press this key: 1(R-Time) 2(Fast) 4(Extend) 6(g)1(Sound) 6(g)2(Clock) 6(g)3(Period) 3(Norm) To select this mode: Real-time Fast Extended Sound Clock Period Normal 20100801