Casio FX-CG10 Software User Guide - Page 557
Sampling Mode, Selectable Channels, If this sampling mode is selected
View all Casio FX-CG10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 557 highlights
ε-12 Using Advanced Setup • Note that the mode you select also determines the channel(s) you can use. Sampling Mode Real-time, Extended, Normal Fast Sound Clock, Period Selectable Channel(s) CH1, CH2, CH3, SONIC CH1, Mic Mic CH1 3. To change the sampling interval setting, move the highlighting to "Interval". Next, press 1 to display a dialog box for specifying the sampling interval. • The range of values you can select depends on the current sampling mode setting. If this sampling mode is selected: Real-time Fast Extended Period Sound Clock Normal This is the allowable setting range: 0.2 to 299 sec 20 to 500 μsec 5 to 240 min "=Trigger" only (no value input required) 20 to 27 μsec "=Trigger" only (no value input required) 0.0005 to 299 sec 4. To change the number of samples setting, move the highlighting to "Number". Next, press 1 to display a dialog box for specifying the number of samples. • You can specify a value in the range of 10 to 30,000. • The total sampling time shown at the bottom of the dialog box is calculated by multiplying the "Sampling Interval" value you specified in step 3 by the number of samples you specify here. Important! • When all of the following conditions exist, a "Distance" setting appears in place of the "Number" setting. See "To configure the Distance setting" (page ε-13) for information about configuring the "Distance" setting. - Channel setup (page ε-9): 2(VERNIR) - [Photogate] - [Pulley] - Sampling mode (page ε-11): Clock 5. To change the warm-up time setting, move the highlighting to "Warm-up". Next, perform one of the function key operations described below. Note • The "Warm-up" setting will not be displayed on the Sample Setup screen if "Fast", "Sound" or "Extended" is currently selected as the sampling mode. To do this: Have the warm-up time for each sensor set automatically Input a warm-up time, in seconds, manually Disable the warm-up time Press this key: 1(Auto) 2(Manual) 3(None) 20100801