Home » Casio Manuals » Desktops » Casio QT 6600 » Manual Viewer

Casio QT 6600 Reference Manual

Casio QT 6600 - 64 MB RAM Manual

View all Casio QT 6600 manuals

Add to My Manuals
Save this manual to your list of manuals

Casio QT 6600 manual content summary:

Casio QT 6600 | Reference Manual - Page 1
QT-6600 Touch Screen Smart Terminal Reference Manual Version 1.1 December 2008 C C c
Casio QT 6600 | Reference Manual - Page 2
to the QT-6600 system. It provides details to allow whole understanding of the system capabilities, its operation, and how it can be used to solve many problems within the retail outlet. This manual does not describe actual programming, which is covered in the QT-6600 programming manual. This manual
Casio QT 6600 | Reference Manual - Page 3
the master terminal by programming. 2) Software concept A flexible application system for development, adopting the following methods: - Function classified application system 3) Terminal hardware concept Color LCD with touch panel In addition to the above, the QT-6600 is also a terminal following
Casio QT 6600 | Reference Manual - Page 4
terminal and restore the program data if the terminal is in malfunction, and leave it power on over 12-hours. • QT-6600 consumes batteries for saving data during 2 minutes after turning off the terminal. • Do NOT power off the terminal over 10 times while a short term. (Except INIT or FC operation
Casio QT 6600 | Reference Manual - Page 5
Operation prompt and error messages R-26 Printing control system R-26 2-2. General description of individual function keys R-29 2-2-1. System R-45 2-5. Other check tracking system control R-46 2-5-1. The timing to clear check detail and index and scheduler R-51 QT-6600 Reference Manual R-5
Casio QT 6600 | Reference Manual - Page 6
logo procedure R-56 2-9. Hourly item R-57 2-9-1. Programming necessary files before using hourly item function R-57 2-10. Time and attendance R-58 2-10-1. Corresponding relations of the file R-59 2-10-2. Clock-in operation R-62 2-10-3. Clock-out operation R-65 2-11. Sign on control R-68 2-11
Casio QT 6600 | Reference Manual - Page 7
online connectors R-117 3-5-2. Hardware interface R-118 3-5-3. Inline / online functions R-120 3-6. Collection / Consolidation system R-121 3-6-1. X/Z collection ...R-123 3-6-2. X/Z consolidation R-125 3-6-3. X/Z collection / consolidation R-128 3-7. Auto-programming function R-131 QT-6600
Casio QT 6600 | Reference Manual - Page 8
156 Table sharing ...R-157 Order character change R-157 Item search ...R-157 Scan Mix & match R-158 Time calculation R-159 Additional PLU character R-160 5. Refund mode operation R-162 5-1. Selecting REF or REG- mode R-162 6. Read and reset operations R-164 6-1. The procedures of reading
Casio QT 6600 | Reference Manual - Page 9
configuration R-10 1-1. General configuration R-10 1-2. Hardware diagram R-11 1-3. Keyboard ...R-12 1-4. Display ...R-13 1-5. Cash drawer R-14 1-6. Input/output connectors R-15 1-7. Optional peripherals R-16 1-8. System configuration R-17 QT-6600 Reference Manual R-9
Casio QT 6600 | Reference Manual - Page 10
This section outlines the hardware, optional devices, and configurations of the QT-6600 system. 1-1. General configuration Front view Touch screen panel Display on/off key Pilot lamp i-Button key receiver (only for QT-6600-DLS) Microphone Stand C C R-10 C Customer display Power switch cover
Casio QT 6600 | Reference Manual - Page 11
key touch screen 1024 x 768 dot color LCD CF card Speaker i-Button key i/f Flash RAM NOR CPU Memory FROM 32MB 64MB 64MB Drawer 1 i/f Drawer 2 i/f Inline RS-232C COM1 RS-232C COM2 RS-232C COM3 RS-232C COM4 RS-232C COM5 RS-232C COM6 Ext. microphone Ext. speaker QT-6011DLS (except for QT-6600
Casio QT 6600 | Reference Manual - Page 12
PLU052 PLU062 5 6 FUNC LIST FIN. TBL LIST TRANS PLU001 PLU011 PLU021 PLU031 PLU041 PLU051 PLU061 1 PLU# 0 REPORTS 23 00 • SUBTOTAL NB LIST 1 CASH/AMT NEW/OLD MENU /TEND CHK 1 LIST 2 MENU 2 LIST 3 MENU 3 LIST 4 MENU 4 LIST 5 MENU 5 LIST 6 MENU 6 LIST 7 MENU 7 1-3-2. Hard key code
Casio QT 6600 | Reference Manual - Page 13
Spagetti •8.00 ↓ •20.00 § ©ª 12 •76.50 Scroll area Current transaction amount/change Status Icons Items sold Total amount • Communication: § • Master/BM error: ¶ • Cut off Master or BM: ß • Receipt on: © • Character shift: Double size: ª Standard size: π QT-6600 Reference Manual R-13
Casio QT 6600 | Reference Manual - Page 14
1 2nd@ Menu shift (1 ~ 15) 2nd unit Price level (1 ~ 2) 1-4-4. Main display brightness control LAN terminal. 2. Connect frame drawer connector (green lead on drawer) to the terminal. Mount the cash register. 1. Attach 2 positioning screws bottom side of the terminal. 2. Mount the terminal
Casio QT 6600 | Reference Manual - Page 15
cover. Bottom side of the terminal Inline (10/100Base-T) LAN DISPLAY SCANNER COM3 COM2 COM6 COM5 PC/MODEM COM1 COM4 PS/2 Keyboard AC Adaptor PS/2 KEYBOARD SPK MIC Drawer 2 Drawer 1 Brightness COM3 COM6 COM2 COM5 COM1 COM4 Ext. microphone Ext. speaker QT-6600 Reference Manual R-15
Casio QT 6600 | Reference Manual - Page 16
, the automatic detection during INIT does not performed. You muse program the I/O parameter manually. 4) Remote display: RS-232C COM 3 port QT-6060D 5) Remote printer (UP-400/360): RS-232C COM 4 ~ 6 port The remote printer is used for reports/kitchen orders/receipts. 6) Inline: Inline port You can
Casio QT 6600 | Reference Manual - Page 17
of the QT-6600. The QT-6600 have four different system configurations, such as 1. Shared check tracking/ floating clerk interrupt system, 2. Inline collection/ consolidation system, 3. Online collection/ consolidation system, and 4. Online collection/ consolidation system (use FTP feature). Before
Casio QT 6600 | Reference Manual - Page 18
Check master Check master Check backup master × Self master × Terminal w/ remote printer ✔ Check backup master × × ✔ Self master × × ✔ Terminal w/ remote printer ✔ ✔ ✔ Note: 1) Please follow the system recommendation above. Otherwise the system performance may be slow down. R-18
Casio QT 6600 | Reference Manual - Page 19
C C C C C C C C C C Maximum 32 terminals 1-8-3. Online collection / consolidation system • Online collection / consolidation and auto-programming for up to 32 terminals. PC on-line (Public / Private Telephone line) C C C C C C C C C C Maximum 32 terminals QT-6600 Reference Manual R-19
Casio QT 6600 | Reference Manual - Page 20
Hardware Configuration 1-8-4. Online collection / consolidation system (use FTP feature) • Online collection / consolidation and auto-programming for up to 32 terminals. PC VPN router ADSL/FTTH MODEM Internet ADSL/FTTH MODEM VPN router C C C C C C C C C C Maximum 32 terminals R-20
Casio QT 6600 | Reference Manual - Page 21
check tracking system control R-46 2-5-1. The timing to Programming necessary files before using hourly item function R-57 2-10. Time and attendance R-58 2-10-1. Corresponding relations of the file R-59 2-10-2. Clock-in operation R-62 2-10-3. Clock-out operation R-65 QT-6600 Reference Manual
Casio QT 6600 | Reference Manual - Page 22
normal electronic journal and producing guest receipts after sales .......... R-83 2-13-4. Transferring electronic journal memory R-84 2-14. Simple time and attendance R-85 2-14-1. Clock-in operation R-85 2-14-2. Clock-out operation R-86 2-14-3. Worktime display R-86 2-14-4. Report ...R-86
Casio QT 6600 | Reference Manual - Page 23
section describes the configuration of application system and their related setting with the QT-6600. Reading this section provides a general understanding of the overall system of the terminal. 2-1. General description of application system 2-1-1. File concept Programming data for each function, as
Casio QT 6600 | Reference Manual - Page 24
The QT-6600 has the following types of totalizers: 1) Fixed totalizers Registration data is accumulated for individual terminals. 2) Function key totalizers Data input by finalize or transaction keys is accumulated in totalizers for each key. Operation types, as well as data used in operation differ
Casio QT 6600 | Reference Manual - Page 25
or names during programming. The QT-6600 automatically switches the keyboard to its character input function when it determines that character input is required for the operation sequence you are performing. This means that you can input characters without having to worry about manually changing the
Casio QT 6600 | Reference Manual - Page 26
Please note that if a clerk want to operate an arrangement, he / she should allow to operate arrangement function. 2-1-6. Operation prompt and error messages The QT-6600 displays messages to indicate the status of the terminal being operated or programmed. These messages help to determine the status
Casio QT 6600 | Reference Manual - Page 27
the receipt Print date / time on the receipt Feature PGM3; Print Control in General Feature PGM3; Print Control in General Feature 2-1-7-2. Validation print control The QT-6600 allows use of the slip printer (SP-1300) for validation printing of item registrations, function registrations and sales
Casio QT 6600 | Reference Manual - Page 28
/RELEASE> or to release the paper. Before using slip printer, you should program the maximum lines of slip. The following two sections are other features to control slip printing format: 2-1-7-4. Endorsement message print control The QT-6600 allows printing of endorsement
Casio QT 6600 | Reference Manual - Page 29
being issued in PGM, X, and Z mode. 10) Display on/off key This key is used for turning on / off the terminal. 11) Page up key* This key is used for turning the window forwards. 12) Page down key* This key is used for turning the window backwards. * Allocatable key QT-6600 Reference Manual R-29
Casio QT 6600 | Reference Manual - Page 30
to specify the type of media during loan, pick up or media change operation. Programmability: Refer to page 94, 96 of the programming manual. 2) New balance key This key is used for adding the latest registered total amount to the previous balance to obtain a new balance. When this key is pressed
Casio QT 6600 | Reference Manual - Page 31
021) This key is used to register amounts of paid outs from the terminal. This transaction affects media totals, rather than sales totals. If the terminal has the file 099 (Euro program file), this key also works as "Euro" key. Euro key has the following features: (1) Converting the main currency
Casio QT 6600 | Reference Manual - Page 32
System 18) Plus key (Function code 029) This key is used for registering surcharge. This operation affects the surcharge amount in the plus key totalizers. The registered transaction. Programmability: Refer to page 104 of the programming manual. 28) No sale key (Function code 042) This key opens the
Casio QT 6600 | Reference Manual - Page 33
subdepartment or PLU. If the preset price is to be registered as it is, simply press the Price key. 36) Department key (Function code 051) This key is used to register items for a department. Programmability: Refer to page 91 of the programming manual. 37) Slip back feed / Release key (Function code
Casio QT 6600 | Reference Manual - Page 34
(Function code 070) This key is used to register a specific PLU at the second unit price. 52) Clerk number key (Function code 072) This key is used to assign a clerk's secret number. Programmability: Refer to page 108 of the programming manual. 53) Operator read / reset key (Function code 073) This
Casio QT 6600 | Reference Manual - Page 35
: Refer to page 109 of the programming manual. 68) New check key (Function code 091) This key is used in a check tracking system to input a new check number in order to open a new check under that number. Programmability: Refer to page 112 of the programming manual. QT-6600 Reference Manual R-35
Casio QT 6600 | Reference Manual - Page 36
scanning PLU code manually. 76) Price change key (Function code 104) This key is used to change the item price of scanning PLU in registering. Programmability: Refer to page 115 of the programming manual. 77) Clock-in/out key (Function code 108) This key is used to register the time when employees
Casio QT 6600 | Reference Manual - Page 37
135) This key is used to enter department numbers. 95) List key (Function code 136) This key is used to display menu lists. Programmability: Refer to page 109 of the programming manual. 96) List number key (Function code 137) This key is used to designate list number. QT-6600 Reference Manual R-37
Casio QT 6600 | Reference Manual - Page 38
simple time and attendance operation. Programmability: Refer to page 116 of the programming manual. 107)Item search key (Function code 246) Use this key to search an item by its name, pulldown group or flat-PLU. Programmability: Refer to page 114 of the programming manual. 108)Order character change
Casio QT 6600 | Reference Manual - Page 39
made at a terminal. 2 The terminal sends printing data to the terminal which controls the remote printer. 3 The terminal which controls the remote printer sends data to the remote printer. Note: Please do not define more than two terminals controlling one LAN printer. QT-6600 Reference Manual R-39
Casio QT 6600 | Reference Manual - Page 40
System 2-3-2. Remote printer control setting Remote printer settings: After changing the DIP switch configuration, remote printer initialization (power on by pressing the key) is necessary. UP-400 Dip switch is located at the bottom of the printer. SW No. Function ON OFF 1 Reset Use
Casio QT 6600 | Reference Manual - Page 41
3 with terminal 1 Note that remote printer backup extends a single level only. If remote printer 1 goes down in the above example, remote printer 2 performs backup printing. If remote printer 2 now goes down, remote printer 3 does not take over backup printing. QT-6600 Reference Manual R-41
Casio QT 6600 | Reference Manual - Page 42
Application System Remote printer print sample 1) Order printing (Normal receipt printing with amount) Check No.123456 MC #01 - Check number / Machine ID REG C01 15-12-2003 12:34 001230 - Mode / Clerk / Date / Time / Consecutive No. 1 Lemon Tea •1.00 - Order with amount *Soft Drinks* 2
Casio QT 6600 | Reference Manual - Page 43
- Condiment 1 Pizza #123456 1 Soft #000001 1 Cheese #000002 1 Tomato #000003 - Main item - Main item PLU No. - Preparation (with quantity / PLU No.) - Condiment (with quantity / PLU No.) QT-6600 Reference Manual R-43
Casio QT 6600 | Reference Manual - Page 44
terminals connected to inline. This means that any terminal can be used to recall a temporary closed check of one's cluster for additional registration or finalization. System configuration (1 cluster system QT-6600 terminals System configuration (multi cluster system) Up to 8 remote printers/system
Casio QT 6600 | Reference Manual - Page 45
the "System down & Recovery" chapter on page 9 of the installation & down recovery manual.) When the system has no backup master for the check tracking system or both master and backup master become down, no more check tracking operation and clerk interrupt operation can be made. QT-6600 Reference
Casio QT 6600 | Reference Manual - Page 46
page 98 of the programming manual. 2-5-3. Store and recall These functions are used for the driving through purchase. The check number used in store operation is defined by check No. range programming. 2-5-3-1 Store This function is used for storing the check No. of the registered items. The Detail
Casio QT 6600 | Reference Manual - Page 47
will be reset. After this operation, the next check No. by using Store function will be the range start. • This function works with the option "Clearing CHK/TBL No. by using the same number again" to "Check number" only. (Refer to page 46 of the programming manual) QT-6600 Reference Manual R-47
Casio QT 6600 | Reference Manual - Page 48
Application System 2-6. Clerk control function 2-6-1. Clerk interrupt The terminal can be programmed to allow the clerk interrupt function, which makes it possible for multiple clerk to simultaneously use the same register. If a clerk starts registration of a transaction, another can be interrupt
Casio QT 6600 | Reference Manual - Page 49
00 •30.00 Operator mistake 3 •60.00 REG C01 1 PLU0001 1 PLU0002 1 PLU0003 10-10-01 12:34 000001 •10.00 •20.00 •30.00 Operation Code ? 1. When the transaction is prohibited, the terminal displays error message and the clerk calls the manager. ----- 3 •60.00 QT-6600 Reference Manual 2. The
Casio QT 6600 | Reference Manual - Page 50
be registered. PLU0003 2 -30.00 •30.00 REG C01 1 PLU0001 1 PLU0002 10-10-01 12:34 000001 •10.00 •20.00 REG Mode 4. Perform manager operation (in this example; void operation). 0.00 5. Pressing the and key is required, when the 2 •30.00 manager returns his/ her office. Note
Casio QT 6600 | Reference Manual - Page 51
The arrangement key function provides a macro command function for the QT-6600 system. Any operation that can be performed using the keyboard of the QT-6600 can be programmed to the arrangement file (file 038 ~ 438). Any operation programmed to the arrangement file can be performed by pressing the
Casio QT 6600 | Reference Manual - Page 52
Application System Note: • Set a "%GET" command, first, to use the number entered by the arrangement key later. • When the "%GET" is programmed following constant number input, the constant number is saved to the parameter save buffer. • Numbers input using a "%PUT" command or by "([number])" are
Casio QT 6600 | Reference Manual - Page 53
an arrangement. "nnnn" (4-digits code) are used for arrangement table number set to each arrangement is a conditional jump command. If the system encounters this command, the value in program. B:nn : This is a command to sound buzzer for nn (nn = 01 ~ 99) seconds. QT-6600 Reference Manual R-53
Casio QT 6600 | Reference Manual - Page 54
Application System ? : Force to execute the arrangement even if an error Sending data (designated by "nn") to the terminal (designated by "m") via FTP. "m" means the rec-# of file-912, "nn" means the rec-# of file-913 6) End of the arrangement programs The end command "E" must be included at the
Casio QT 6600 | Reference Manual - Page 55
button. (1111100000000) ; Input the operation code for system command %PUT ; Pick up the time. 2) Interval execution of an arrangement key function by setting start time, ending time, and the interval. See the page 48 of the programming manual for programming details. QT-6600 Reference Manual
Casio QT 6600 | Reference Manual - Page 56
terminal program, it can be made only by PC and downloaded from PC. 2-8-1. About graphic logo Graphic logo size: Printing sample: 432 × 104 or 432 × 208 pixels * QT-6600 TERMINAL terminal via online automatically. 3. Select "Print Graphic" option in the message control of the general feature
Casio QT 6600 | Reference Manual - Page 57
End Cycle Time Time Zone 08:00 12:00 01:00 13:00 • • • 14:00 • • • 00:15 • • • Hourly item link 20 items REC No. 0001 0011 File No. 004 001 0005 012 0008 012 • • 20 items • • • • • • A maximum of 20 records corresponds to each time zone. QT-6600 Reference Manual R-57
Casio QT 6600 | Reference Manual - Page 58
System 2-10. Time and attendance This function allows shop owners to control his / her employees' working condition. Time & attendance require the following files. - Employee file This file is used to regulate the labor conditions. You can program , totally 21 files can be registered in this file.
Casio QT 6600 | Reference Manual - Page 59
used to administrate the cycle time. You can specify the length of time zone. 2-10-1. Corresponding relations of the file Employees' job assign This function is used to assign a job to each employee. Before assigning the job, be sure to program Job 3 Job 4 Job 5 Job 6 QT-6600 Reference Manual R-59
Casio QT 6600 | Reference Manual - Page 60
Application System Employee's Schedule and total business results per week Employee 1 Employee 2 Employee 3 Employee 4 Work time Employee 1 Employee 1 Employee 1 Employee 1 Employee 1 Employee 1 Employee 1 Employee 1 Employee 1 Employee 2 Employee 2 Employee 2 Employee 2 Employee 2 Employee 2
Casio QT 6600 | Reference Manual - Page 61
Programmed weekly work time ~ Programmed weekly overtime Weekly overtime 2: Programmed weekly overtime ~ Flow of Time & Attendance operation The following flow shows the order of Time programming manual for details.) ( CLOCK-IN → BREAK-IN ) → BREAK-OUT → CLOCK-OUT QT-6600 Reference Manual R-61
Casio QT 6600 | Reference Manual - Page 62
System 2-10-2. Clock-in operation This function is used to register the Starting work time. If the total worktime is greater than the daily/ weekly programmed time, minor employee cannot be clocked in. (Error 169 occurs) In this case, clock-in by manager. 2-10-2-1. Clock-in operation (1) Program
Casio QT 6600 | Reference Manual - Page 63
non-preset job-code = NO (Refer to the page 62 of the programming manual.) Operation REG 10-10-01 11:59 AM 001234 CLOCK-IN 1.Cashier 2.Cook to register the start of working hours. → Job codes that are programmed in Employee file are displayed. XXXXXX Employee No. QT-6600 Reference Manual R-63
Casio QT 6600 | Reference Manual - Page 64
Application System 2-10-2-4. Clock-in operation (4) Program: Operation Display job code window = YES Allow to clock-in with non-preset job code = YES (Refer to the page 62 of the programming manual.) REG 10-10-01 11:59 AM 001234 CLOCK-IN 1.Cashier 2.Cook 3.Dish Washer 4.Cleaning 5.JOB A 6.JOB
Casio QT 6600 | Reference Manual - Page 65
#30), time WORK TIME BREAK TIME CASH TIP 02:45 00:45 $12.34 - Special character (REC #34), working hours - Special character (REC #35), recess - Special character (REC #36), cash tip amount If you want to change these special characters, refer to the page 134 of the programming manual. QT-6600
Casio QT 6600 | Reference Manual - Page 66
Application System 2-10-3-3. Break-in operation This function is used for the employees to register a recess. Operation REG 10-10-01 11:59 AM 001234 GLENN DEAL 11:59 AM Break-in OK? 0.00 1. XXXXXX . 2. When this message appears, press the key to register the start of a
Casio QT 6600 | Reference Manual - Page 67
QT-6600 Reference Manual R-67
Casio QT 6600 | Reference Manual - Page 68
by an employee who has not CLOCK-IN. The following conditions should be fixed. • Use only one terminal (master terminal) for the CLOCK-IN/OUT operation. This terminal should be connected inline to the satellite terminals. But the time and attendance work file (file 806) should be allocated to all
Casio QT 6600 | Reference Manual - Page 69
operation.) 2. 99 xxxx (xxxx: the secret code of the corresponding employee, 4-digit.) 3. Sign off by the manager and the corresponding employee can sign on. When the error message appeared under the employee's CLOCK-IN operation, manager should operate above steps. QT-6600 Reference Manual
Casio QT 6600 | Reference Manual - Page 70
Application System 2-12. IDC (Item Data Capture) This function is used for capturing all the registered item data by the REG / REF / REG- modes. IDC file stores these captured items. If there is no record to capture item data, the new
Casio QT 6600 | Reference Manual - Page 71
- G Department 051 O Coupon number 110 - Location change 260 - Slip back feed/Release 054 - Substitution 111 - Table sharing 261 - Slip 055 - Ketten Bon *1 113 O G : Available items to be programmed as target for IDC. O : IDC target - : Out of target QT-6600 Reference Manual R-71
Casio QT 6600 | Reference Manual - Page 72
Application System *1 This function itself is not captured. But it is captured captured. *10 This function is captured only in the sales registration. *11 This function is captured only in the check tracking registration. During clerk interrupt operation, this is not captured. *12 Tray total is
Casio QT 6600 | Reference Manual - Page 73
2 (Refer to the page 11 of the programming manual.) Operation Item Data Capture Item Data Capture YES Note: registered data. 2. The necessary files for IDC • File 036 (Registration buffer) • File 063 (IDC buffer) • File 057~ 059 (IDC file) • File 804 (IDC link file) QT-6600 Reference Manual
Casio QT 6600 | Reference Manual - Page 74
Application System 2-12-3. How to memorize the captured items Flow of the transferring data 1. Program: "Store data = Whole transaction for IDC (1)" and "Item only for IDC (2)" (refer to the page 64 of the programming manual.) Example PLU 0001---> Memorized all the transaction into the IDC file
Casio QT 6600 | Reference Manual - Page 75
in local currency Total Amount Change Amount Totaling Type Room-# Room guest-# Descriptor Not Used Totaling Type 0: Total operation, 1: Change operation, 2: Partial tender operation, 3: Single item w/o total line *1 ~ *4: Refer to the last page of this section. QT-6600 Reference Manual R-75
Casio QT 6600 | Reference Manual - Page 76
Type 0: Total operation, 1: Change operation, 2: Partial tender operation, 3: Single item w/o total line Mc ID 03 Type *2 File-# *1 Rec-# *1 Tendering amount Food stamp subtotal amount Food stamp change amount (only for FS/TD) Cash change Amount Totaling Type Descriptor Not Used 60 0123 5 60
Casio QT 6600 | Reference Manual - Page 77
section. QT-6600 Reference Manual 60 0123 5 Mc ID 03 Type *2 FIile-# *1 Rec-# *1 Selective item status-# Not Used Selective ID 03 Type *2 File-# *1 Rec-# *1 Tax status *3 Item status *4 No. Amount Unit Price Decsriptor Not Used 60 0123 5 60 44 28 23 18 9 11 13 0123 5 + / - / Coupon
Casio QT 6600 | Reference Manual - Page 78
Used Check-# Descriptor Not Used 42 26 20 14 9 Store Mc ID 03 Type *2 File-# *1 Rec-# *1 Not Used Descriptor Not Used 30 14 9 Media change 2 TA2 TA2 TA2 TA2 Taxable amount 1 TA1 TA1 TA1 TA1 Field name Tax system VAT U.S. Canada Singapore Taxable Taxable amount 6 amount 7 46 51 60 0 1
Casio QT 6600 | Reference Manual - Page 79
QT-6600 Reference Manual 60 0123 5 60 0123 5 Mc ID 03 Type *2 File-# *1 Rec-# *1 Descriptor Not used 25 9 No sale (NS or #/NS) MM type: Minus = 00, %- = 01, Free Tax status *3 Item status *4 Quantity Amount Unit price Shift price level Descriptor Not used 60 0123 5 51 60 34 35 29 24
Casio QT 6600 | Reference Manual - Page 80
System *1 File-#, Rec-#: These are stored in Hexa-decimal. If the data is "ABCD", it means "CDAB". *2 Type: It means record type, refer to 2-12-5 IDC data type section of this manual , b10: always "1" *4 Item status: b6~: not used, b5: 2nd@registration, b4: house Bon registration, b3:
Casio QT 6600 | Reference Manual - Page 81
DTLTYPE_NOSALE B4 DTLTYPE_END FF * Includes the item registered as a child PLU Capture item Scan item change Media change (get) Media change (put) Loan Pick up Finalize loan/pick up Currency exchange Cashing a check Mix & match Scan mix & match No sales End IDC Record QT-6600 Reference Manual
Casio QT 6600 | Reference Manual - Page 82
system. Refer to the terminal structure as below. PC Via COM 1 port of the master terminal by using Job command to collect IDC files from all satellite terminals. 3. "Reset consolidation total after inline consolidation" in the programming the communication in the machine feature programming.
Casio QT 6600 | Reference Manual - Page 83
You can issue both type of the electronic journal read or reset report by date or by consecutive number. Refer to the page 156 of this manual. 2-13-3. Displaying normal electronic journal and producing guest receipts after sales Pressing the key shows the most recent transactions. You
Casio QT 6600 | Reference Manual - Page 84
electronic journal files through inline system. Refer to the terminal structure illustrated below. PC Via COM 1 port of the master terminal (direct/Modem) C C the collection command by using Job command to collect electronic journal file from a satellite terminal. 2. Collection master receives
Casio QT 6600 | Reference Manual - Page 85
. ( Refer to "4-3-7-33 Worksheet for clock-in/clock-out" in the programming manual for details.) → CLOCK-IN CLOCK-OUT 2-14-1. Clock-in operation This function is used to register the Starting work time. Operation REG 10-10-01 11:59 AM 001234 PERSONALNO.: ---***** 1. XXXXXX
Casio QT 6600 | Reference Manual - Page 86
Application System 2-14-2. Clock-out operation This function is used to register the Ending work time. Operation REG 10-10- employee number 2-14-4. Report Clock-in/ clock-out time and clock-out reason are printed on the simple time and attendance report. Refer to the Read/ Reset chapter. R-86
Casio QT 6600 | Reference Manual - Page 87
from the magnetic card and store it to the check index memory. • In case of using this feature, program "transfer table by card swiping" (D10 of the address 26 of the general control program) • Use Track-1 3. Clerk sign on *1 Card swiping activates clerk sign on. (effective during signing off only
Casio QT 6600 | Reference Manual - Page 88
Application System Magnetic card specification Track-1, Format B: Start sentinel - one character (generally '%') Format front of the card Separator - one character (generally '=') Expiration date - four characters in the form MMYY Service code - three characters Discretionary data - as in track one
Casio QT 6600 | Reference Manual - Page 89
system R-121 3-6-1. 3-6-2. 3-6-3. X/Z collection R-123 X/Z consolidation R-125 X/Z collection / consolidation R-128 3-7. Auto-programming function R-131 3-7-1. 3-7-2. Auto-programming functions R-131 Auto-program operation and CF card utilities R-132 QT-6600 Reference Manual
Casio QT 6600 | Reference Manual - Page 90
: Start Input Init code (see above) Hardware reset All RAM reset Inline ID definition File creation 1 Initialization operation Input date/time, ID etc. File creation 2 Revise terminal connection table Receiving program from other terminal or CF card Initialization result to E-journal End
Casio QT 6600 | Reference Manual - Page 91
Program code : D 6 : D 5 ; D 4 : D3 ; D2 ; D 1 3-2. IPL (Initial Program Loading) 3-2-1. IPL IPL should be made before initializing when the application software has been modified. IPL via CF card Start ROM check Store the receiving data to Flash Continue to INIT QT-6600 Reference Manual
Casio QT 6600 | Reference Manual - Page 92
to CF card IPL from CF card Restore all data Clear IPL data END in the CF card 3-2-2. System configuration before IPL operation Insert the IPL CF card to the terminal or connect PC and target terminal. IPL source CF card IPL target IPL Data C C CF card slot is located on the leftside of
Casio QT 6600 | Reference Manual - Page 93
14. Customer 15. Customer Busy Reset 16. Recording 17. Print batch maintenance file 18. Execute batch maintenance 19. Re-index scanning PLU file 20. Licence code entry 21. FTP client 22. Maintenance data 23. Printer logo send 24. Clerk number 25. Operation monitor QT-6600 Reference Manual R-93
Casio QT 6600 | Reference Manual - Page 94
Manager Operation 3-3-1. System connection check This command shows the connection status of terminals, and printers. MGR C01 10-10-01 12:34 000000 Manager Mode 1.System Connection Check 2.Remote On 3.Remote Off 4.Busy Reset 5.Stock Maintenance 6.Drawer for Clerk 7.CHK#(CLK Interrupt)
Casio QT 6600 | Reference Manual - Page 95
on This command is used to power on the terminals connected with the same inline. MGR C01 10-10-01 12:34 000000 Manager Mode 1.System Connection Check 2.Remote On 3.Remote Off 4.Busy Reset 5.Stock Maintenance 6.Drawer for Clerk 7.CHK#(CLK Interrupt) 8.Order ID Change ↓ 0.00 1. Sign on
Casio QT 6600 | Reference Manual - Page 96
Manager Operation 3-3-4. Busy reset This command is used to release the busy flag of the check used by other dead terminal. Executing this command always releases this flag, so please be careful to perform this operation. MGR C01 10-10-01 12:34 000000 Manager Mode 1.System Connection Check 2.
Casio QT 6600 | Reference Manual - Page 97
1.System Connection Check 2.Remote On 3.Remote Off 4.Busy Reset 5.Stock Maintenance 6.Drawer for Clerk 7.CHK#(CLK Interrupt) 8.Order ID Change ↓ screen. +100.000 7. Press the key to terminate this sequence. 8. Press the key to issue receipt. RECEIPT QT-6600 Reference Manual
Casio QT 6600 | Reference Manual - Page 98
Manager Operation 3-3-6. Drawer for clerk This command is used to designate the drawer 1 ~ 2. MGR C01 10-10-01 12:34 000000 Manager Mode 1.System Connection Check 2.Remote On 3.Remote Off 4.Busy Reset 5.Stock Maintenance 6.Drawer for Clerk 7.CHK#(CLK Interrupt) 8.Order ID Change ↓ 0.00
Casio QT 6600 | Reference Manual - Page 99
: D4 D3 D2 D1 In case of RS-232C printer, D4D3: Terminal ID number which connects with the printer. D2D1: 01 = Printer 1, 02 = Printer 2, 03 = Printer 3 In case of LAN printer, D D : Terminal ID number which sends data to the printer. 43 D2D1: 11 ~ 26 = Printer 1 ~ 16 QT-6600 Reference Manual R-99
Casio QT 6600 | Reference Manual - Page 100
off ↑ 4.Busy Reset 5.Stock Maintenance 6.Drawer for Clerk 7.CHK#(CLK Interrupt) 8.Order ID Change 9.Error Log Print 10.System Re-configuration ↓ 0.00 1. Sign on a clerk (if necessary). 2. Press and to assign manager mode. ID #01 MC #01 #03 MC #03 Date Time OPE ERR JOB
Casio QT 6600 | Reference Manual - Page 101
System Re-configuration NO OK? YES 4. Choose the option "YES (Perform system re-configuration) 0.00 / NO (Abort this procedure)" and press the key. ß * Perform "System Recofiguration" operation at the terminal that shows system error icon ¶. QT-6600 Reference Manual R-101
Casio QT 6600 | Reference Manual - Page 102
transaction data or not) by the operation described below. MGR C01 10-10-01 12:34 000000 Manager Mode 9.Error Log Print ↑ 10.System Re-configuration 11.Item Data Capture 12.EURO Change over 13.Clerk Window 14.Customer 15.Customer Busy Reset 16.Recording ↓ 0.00 1. Sign on a clerk
Casio QT 6600 | Reference Manual - Page 103
all of totalizer and change over EURO/LOCAL system. Are you sure want to execute these job? YES 0.00 EURO Change over Operation Code ? 4. If you want to proceed this step, press the key. To abort this step, press the or key. 0.00 QT-6600 Reference Manual 5. If you want to
Casio QT 6600 | Reference Manual - Page 104
Manager Operation 3-3-13. Clerk window You can program clerk window contents in the MGR mode. MGR C01 10-10-01 12:34 000000 Manager Mode 9.Error Log Print ↑ 10.System Re-configuration 11.Item Data Capture 12.EURO Change over 13.Clerk Window 14.Customer 15.Customer Busy Reset 16.
Casio QT 6600 | Reference Manual - Page 105
You can program (add / modify / delete) the customer (name, address etc.) in the MGR mode. MGR C01 10-10-01 12:34 000000 Manager Mode 9.Error Log Print ↑ 10.System Re-configuration 11.Item Data Capture 12.EURO Change over 13.Clerk Window 14.Customer 15.Customer Busy Reset 16.Recording
Casio QT 6600 | Reference Manual - Page 106
busy reset This command is used to release the busy flag of the customer used by other dead terminal. Executing this command always releases this flag, so please be careful to perform this operation. MGR C01 10-10-01 12:34 000000 Manager Mode 9.Error Log Print ↑ 10.System Re-configuration
Casio QT 6600 | Reference Manual - Page 107
Group Link Dept Link Sub-Dept Link Taxable status Scan Mix&Match Negative Price Zero Unit Price Open PLU Item Follows Department Compulsory Multiply Not Allowed Multiplication Change $12.34 -------- DEPT01 -------- Non Tax -------- NO NO NO NO NO NO 491077008 : QT-6600 Reference Manual R-107
Casio QT 6600 | Reference Manual - Page 108
Operation 3-3-18. Execute batch maintenance file This command is used to execute batch maintenance file. MGR C01 10-10-01 12:34 000000 Manager Mode 11.Item Data Capture ↑ 12.EURO Change over 13.Clerk Window 14.Customer 15.Customer Busy Reset return the root screen automatically. R-108
Casio QT 6600 | Reference Manual - Page 109
used to re-index the scanning PLU file. After this command, send the scanning PLU file to all terminals of the cluster. MGR C01 10-10-01 12:34 000000 Manager Mode 12.EURO Change over ↑ 13.Clerk Window 14.Customer 15.Customer Busy Reset screen automatically. QT-6600 Reference Manual R-109
Casio QT 6600 | Reference Manual - Page 110
Operation 3-3-20. Licence code entry This command is used to enter the software licence code. MGR C01 10-10-01 12:34 000000 Manager Mode 13.Clerk Window ↑ 14.Customer 15.Customer Busy Reset press the key. FTP Client FTP SERVER 1.HEAD OFFICE 2.FTP SERVER 2 3.FTP SERVER 3 4.FTP SERVER 4
Casio QT 6600 | Reference Manual - Page 111
This command is used to backup the maintenance data to the CF card or clear the data in the internal flash memory. MGR C01 10-10-01 12:34 000000 Manager Mode 15.Customer Busy Reset ↑ 16.Recording 0.00 4. Select "Data backup to CF" and press the key. QT-6600 Reference Manual R-111
Casio QT 6600 | Reference Manual - Page 112
want to change. And select "YES" and press the key. The log file contains; • System error log: LOGFILE.148 (file-148, 149) • Operation log: Maintenance Data Clear", the terminal clears file-148, 248, 348, 149, 249 and 349. 3-3-23. Printer logo send This command is used to send the edited
Casio QT 6600 | Reference Manual - Page 113
mode. 3. Enter "99990000nn (nn: terminal ID No. to monitor)" and press the to start operation monitor. Note: Do not designate the monitored or monitoring terminal. The display shows the screen of the monitored terminal. Start... 0 . 00 QT-6600 Reference Manual 4. Press twice break the
Casio QT 6600 | Reference Manual - Page 114
Operation 3-4. System command execution 3-4-1. System command functions are provided to perform nonregistration operations, such as collection / consolidation system control, backup / restore operation of files in the terminals PLU or Not found PLU sales by group/ department/ subdepartment
Casio QT 6600 | Reference Manual - Page 115
Inactive (Zero sales) No extraction By date and consecutive number) Void reason Hourly / Labor Employee Employee activity Hourly item Customer group Electronic journal Intelligent electronic journal Mix & match Scan mix & match IDC (1) clear IDC (2) clear IDC (3) clear QT-6600 Reference Manual
Casio QT 6600 | Reference Manual - Page 116
Manager Operation 3-4-2. X/Z collection / consolidation X/Z No extraction Inactive (Zero sales) No extraction By Range Execution stock Subdepartment Department Group Clerk Time zone Monthly Void reason Hourly terminal Terminal ID of individual terminal Remote power on Remote power off Meaning
Casio QT 6600 | Reference Manual - Page 117
The following details the inline and online data communication functions available with the QT-6600 system. 3-5-1. Inline / online connectors With the QT-6600, there are the following inline / online connectors in the rear side of the body. Inline RS-232C COM1 RS-232C COM2 RS-232C COM3 RS-232C
Casio QT 6600 | Reference Manual - Page 118
Manager Operation 3-5-2. Hardware interface 3-5-2-1. Inline interface The maximum inline cable length and the maximum connection unit will be varied by the inline communication speed as shown below figure. • Using 10BASE-T Cable length: 100m (hub to terminal, hub to hub) Maximum 4 hubs in one
Casio QT 6600 | Reference Manual - Page 119
3-5-2-2. Online interface Only the Terminal (COM 1) Pin Signal No. name 3 SD/TDX 2 RD/RXD 7 RS/RTS 8 CS/CTS 1 CD/DCD 4 ER/DTR 6 DR/DSR 9 CI/RI 5 GND PC Signal Pin Pin name No. No. SD 3 2 RD 2 3 RS 7 4 CS 8 5 CD 1 8 ER 4 20 DR 6 6 CI 22 GND 5 7 (DSUB25) (DSUB9) QT-6600 Reference Manual
Casio QT 6600 | Reference Manual - Page 120
Manager Operation 3-5-3. Inline / online functions 3-5-3-1. Inline functions The list below shows the main functions available with the QT-6600 system. In case of these functions below are executed, the satellite terminal can receive these commands even if the satellite terminal is in OFF mode. 1)
Casio QT 6600 | Reference Manual - Page 121
/ consolidation system of the QT-6600. The collection / consolidation system is managed by the master/satellite system using inline network. Installation of any special hardware devices is not required for collection / consolidation as inline interfaces are standard feature. Communication is
Casio QT 6600 | Reference Manual - Page 122
Group Clerk detail Hourly sales Monthly sales Void table Table analysis Grand total Hourly item Hourly labor Mix & match Scan Mix & match Customer group Shift PLU Scanning PLU Daily total 001 002 003 004 005 006 011 009 010 012 018 020 021 014 051 056 042 055 016 Terminal files Periodic 1 total
Casio QT 6600 | Reference Manual - Page 123
for the other terminals. Data will be sent without the clerk noticing, even when the satellite in the process of registering. 3-6-1-2. Z collection processing is terminated, the data to be collected remains as they are, and Z lock statuses are automatically released. QT-6600 Reference Manual R-123
Casio QT 6600 | Reference Manual - Page 124
Manager Operation 3-6-1-3. X/Z collection command execution X/Z C01 10-10-01 12:34 000000 Inline X/Z 1.Collection 32 Error End 12:40 11110 0 0021 ← Reset counter 0022 0001 ← Error code 0020 C 01 NOTE: R-124 0.00 6. Press the key twice to terminate or to cancel this process. • If money
Casio QT 6600 | Reference Manual - Page 125
consolidation file. 4 The same process described in item 1 to 3 is executed for other terminals. 5 After the above collection processing is completed for all objected terminals, the data accumulated in the consolidation work file are reported on the master's printer. QT-6600 Reference Manual R-125
Casio QT 6600 | Reference Manual - Page 126
of all objected terminals are cleared, and then satellite's Z lock statuses are released. • Even if an error is occurred, or if the processing is terminated, the data to be collected remains as they are, and Z lock statuses are automatically released. Therefore, retrying the same operation can be
Casio QT 6600 | Reference Manual - Page 127
terminal(s). 11111 0 0021 ← Reset counter 0022 0001 ← Error code 0020 C 01 NOTE: 0.00 6. Press the key twice to terminate or to cancel this process. • If money declaration compulsory is set, enter in drawer amount and press (or ) before issuing report. QT-6600 Reference Manual
Casio QT 6600 | Reference Manual - Page 128
Manager Operation 3-6-3. X/Z collection / consolidation This function is used to obtain the counters and totals of the individual terminals (collection) and of all objected terminals in the store (consolidation) by one procedure. After printing collection report on the master's printer, the master
Casio QT 6600 | Reference Manual - Page 129
then satellite's Z lock statuses are released. • Even if an error is occurred, or if the processing is terminated, the data to be collected remains as they are, and Z lock statuses are automatically released. Therefore, retrying the same operation can be performed. QT-6600 Reference Manual R-129
Casio QT 6600 | Reference Manual - Page 130
Manager Operation 3-6-2-3. X/Z collection / consolidation command execution X/Z C01 10-10-01 12:34 End MC #04 12:40 11112 0 0021 ← Reset counter 0022 0001 ← Error code 0020 C 01 NOTE: R-130 0.00 6. Press the key twice to terminate or to cancel this process. • If money declaration
Casio QT 6600 | Reference Manual - Page 131
) This function copies the specific terminal program file (except system work files) without counters and totalizers. 4) Copy unit price field of particular files (send / receive) This function copies the unit price field of specific files (i.e. PLU, PLU 2nd@). QT-6600 Reference Manual R-131
Casio QT 6600 | Reference Manual - Page 132
Additional BMP Picture FTP Login Password FTP Server Name FTP Trans File User logo Check Window 21 Check Window 22 Check Window 23 Keys for Check Window Free Function List Tare Table Additional PLU Character Additional Item Program Additional Order Control Sign Off Reason PC Keyboard TCP/IP R-132
Casio QT 6600 | Reference Manual - Page 133
Sound (1) Sound (2) : Sound (10) Color Definition Color Theme BMP Picture Additional BMP Picture FTP Login Password FTP Server Name FTP Trans File User logo Check Window 21 Check Window 22 Check Window 23 Keys for Check Window Free Function List Tare Table TCP/IP QT-6600 Reference Manual R-133
Casio QT 6600 | Reference Manual - Page 134
Manager Operation The procedure of Data Restore from the CF card X/Z C01 10-10-01 12:34 000000 CF Card 1.Data Backup 2.Data Restore 3.Backup File List 4.
Casio QT 6600 | Reference Manual - Page 135
This procedure deletes all data in the CF Card. Are you sure to format? 0.00 4. Press the key to continue formatting, means abortion. QT-6600 Reference Manual R-135
Casio QT 6600 | Reference Manual - Page 136
Manager Operation R-136
Casio QT 6600 | Reference Manual - Page 137
function R-154 4-17. Mix & match / coupon R-155 4-18. Customer ...R-156 4-19. Table sharing R-157 4-20. Order character change R-157 4-21. Item search ...R-157 4-22. Scan Mix & match R-158 4-23. Time calculation R-159 4-24. Additional PLU character R-160 QT-6600 Reference Manual R-137
Casio QT 6600 | Reference Manual - Page 138
QT-6600. Key catch tone, error tone volume can be controlled by the key. 4-1. Clerk sign on / off operation The following examples illustrate the clerk sign on / off operation. • When an i-Button key is used, sign on operation a few clerk key and program no clerk number one of the
Casio QT 6600 | Reference Manual - Page 139
registered item ( key operation) Use the key to cancel a data that has just been registered using a function key. The key can be used to cancel data registered using departments, subdepartments, PLUs, scan PLUs, partial tenders, or the
Casio QT 6600 | Reference Manual - Page 140
the previous registered item ( key operation) If data has been registered using a function key and registration of the next item has begun, use the key to cancel previous registered data. Entries using departments, subdepartments, PLUs or scan PLUs can be cancelled using the
Casio QT 6600 | Reference Manual - Page 141
-01 12:34 000001 •1.00 •2.00 •9.00 •4.00 2. Press the key. CANCEL 0.00 Please sign on. 3. Press the key to cancel the transaction. QT-6600 Reference Manual R-141
Casio QT 6600 | Reference Manual - Page 142
key, key(s) should be allocated on the keyboard before step 2. 2) Programming pulldown group (page 32 of the programming manual) 3) Programming item price (page 140 of the programming manual) Normal registration by using the and key LIST01 PLU001 0/1-1 PLU002 PLU003 PLU005
Casio QT 6600 | Reference Manual - Page 143
PLU017 •10.00 •11.00 (List pop-up window) REG C01 10-10-01 12:34 000001 1 PLU0001 •10.00 1 PLU0012 •1.00 1 PLU0015 1. Register the parent (main) PLU. The list linked appears. 2. Select the appropriate (child/grandchild) PLU. PLU0001 2 •10.00 •11.00 QT-6600 Reference Manual R-143
Casio QT 6600 | Reference Manual - Page 144
use this function. 1) Programming set menu table (page 33 of the programming manual) 2) Programming pulldown group (page 32 of the programming manual) 3) Programming PLU "Set menu table linking" and "List Link No." (page 88 of the programming manual) 4) Programming item prices ← 1.Registering a PLU
Casio QT 6600 | Reference Manual - Page 145
But it is possible to register a different number of list linked PLU or child PLU from the number of main PLU. Before using the inner multiplication, the following program is necessary in addition to 2 3 •30.00 2. Enter appropriate quantity and press the key. QT-6600 Reference Manual R-145
Casio QT 6600 | Reference Manual - Page 146
set menu and register the selected item. For example, it is used to register dessert which is included in a set menu. (This function is only effective in check tracking operation.) 4-7-1. To suspend 1 •12.00 Pressing the key recalls the pulldown menu screen to select items. R-146
Casio QT 6600 | Reference Manual - Page 147
Separate check Separate check is used to transfer the registered items in the original check to the other check or pick up the registered items in the original check to key in the separate check window to terminate. The selected items are transferred to other check. QT-6600 Reference Manual R-147
Casio QT 6600 | Reference Manual - Page 148
print out the opened check report of the signed on operator. REG C01 10-10-01 12:34 000001 0.01 or displayed (depends on the program). 4-10. Split payment (Dutch account) This key is used to share the total payment by customer. REG C01 1 PLU0001 1 PLU0002 2 PLU0003 TL CASH 10-10-01 12:34
Casio QT 6600 | Reference Manual - Page 149
media key to be changed. CHECK •2.00 •8.00 REG C01 10-10-01 12:34 000001 MEDIA CHG CASH -10.00 CHECK •2.00 CREDIT •8.00 3. Enter the amount to change and press the media to change, until the change amount equals to the changed amount. CREDIT •8.00 QT-6600 Reference Manual R-149
Casio QT 6600 | Reference Manual - Page 150
> or key is pressed, tax status change will be applied. Be sure to program before using this function. Example of receipt image 1 Hamburger 1 French fries 1 Coffee TAKE-OUT •2.00 •1.50 •1.00 4-13. Scanning PLU This function is used for registering PLU items by scanner or OBR code
Casio QT 6600 | Reference Manual - Page 151
the appropriate department key. Non PLU QT-6600 accepts both PLU type and non PLU type barcode. Non PLU type barcode includes item price/ weight. In case of registering non PLU type barcode, you should program Non PLU table file before you use (program or register) scanning PLU items. Refer to
Casio QT 6600 | Reference Manual - Page 152
on code QT-6600 has a capability to log the supplemental (add-on) barcode data with main barcode. The add-on code is logged to the Add on/ VMP file (file-040) with main barcode, shop code, consecutive number, date, time and item quantity. The barcode data of the main item should be programmed to the
Casio QT 6600 | Reference Manual - Page 153
without allocating scanning PLU file.) Example of receipt image 1 Hamburger 1 French fries 1 Coffee NB $2.00 $1.50 $1.00 $4.50 2800000012342 - Barcode - Numeric code Check number (within 4-digits) Flag code: After = 28 After Finalization = 29 QT-6600 Reference Manual R-153
Casio QT 6600 | Reference Manual - Page 154
Registration 4-16. Round repeat function This function is used for repeating registered items of the last receipt finalized by key in check tracking system or clerk interrupt operation. REG C01 10-10-01 12:34 000001 CHECK No.1111 1 PLU0001 •1.00 1 PLU0002 •2.00 1 PLU0003 •3.
Casio QT 6600 | Reference Manual - Page 155
Before using the mix & match / coupon function, the following programs are necessary to use this function. 1) Programming mix & match table (page 63 of the programming manual) : (Discount is performed automatically.) QT-6600 Reference Manual R-155
Casio QT 6600 | Reference Manual - Page 156
using the customer function, the following programs are necessary to use PLU0002 •2.00 1 PLU0003 •3.00 DISC -0.60 TL •5.40 CASH •6.00 CG •0.60 CG •0.60 1. Press the
Casio QT 6600 | Reference Manual - Page 157
. B1. By pressing key, the pulldown group like window appears on the screen. B2. You can select the item in the window. C1. By pressing key, the flat-PLU like keyboard appears on the screen. C2. You can select the item in the keyboard. QT-6600 Reference Manual R-157
Casio QT 6600 | Reference Manual - Page 158
match is scanning PLU. Before using the scan mix & match function, the following programs are necessary to use this function. 1) Programming scan mix & match table (page 124 of the programming manual) • Discount type (mix & match discount, amount reduction type or free item type) • Minus or discount
Casio QT 6600 | Reference Manual - Page 159
* TB/ Interval time Total fee (case C) = @3 * TC/ Interval time Unit price = @1 Unit price = @2 Unit price = @3 In Case A TA In In Out 1 Case B TB Out 2 Case C TC TF TS Example of receipt image CHECK No.1 2 PLU0001 12:00 -> 13:50 •25.00 - Time frame Out 3 QT-6600 Reference Manual R-159
Casio QT 6600 | Reference Manual - Page 160
descriptor for customer/ employee convenience. This file is used for registering item. Additional PLU character file This file stores additional add-on (maximum 10 kinds of add-on), replace/ add-on selection program, additional character target device. In case of replacing PLU character: PLU file
Casio QT 6600 | Reference Manual - Page 161
5. Refund mode operation R-162 5-1. Selecting REF or REG- mode R-162 QT-6600 Reference Manual R-161
Casio QT 6600 | Reference Manual - Page 162
C01 RF C01 10-10-01 12:34 000001 REFUND Mode C01 R- C01 10-10-01 12:34 000001 REG- Mode C01 Note: Key operations are similar to that in the register mode. To avoid miss-registration in the REF or REG- mode, return the mode to the former one immediately. R-162
Casio QT 6600 | Reference Manual - Page 163
6. Read and reset operations R-164 6-1. The procedures of reading or resetting R-164 6-2. Report sample R-166 QT-6600 Reference Manual R-163
Casio QT 6600 | Reference Manual - Page 164
Read and Reset 6. Read and reset operations By setting the mode to the X or Z, the contents of totalizers and counters are enabled to read. The X mode allows report at any time during business hours. The Z mode is only performed at the end of the business day, since it clears the data stored to the
Casio QT 6600 | Reference Manual - Page 165
totalizer Free Function PLU PLU stock (Daily X/Z only) Sub Department Department Group Hourly sales Monthly sales Table analysis Void Hourly product Mix & Match Simple Time Same as Periodic 2 X Employee activity Employee Employee edit Hourly Labor QT-6600 Reference Manual R-165
Casio QT 6600 | Reference Manual - Page 166
Reset 6-2. Report sample Cashier / clerk report Z 0001017 CASHIER/CLERK 123 - Mode / Report code / Report title / Z No. (Z only) C01 GROSS NET CAID CHID CKID CRID CASH Report title •38.00 - Net sales title / Counter /Totalizer •35.00 - Cash in drawer title / Cash in drawer •0.00 - Charge in
Casio QT 6600 | Reference Manual - Page 167
/ Grand total 3 000001--->001279 - Consecutive No. range Free function Z 0001012 FREE FUNCTION CASH RC PD No 11 No 2 No 1 123 - Mode be skipped) / Sales ratio (can be skipped) •1.23 - 1st unit price descriptor / Counter / Amount •2.50 •6.37 •32.00 •5.00 QT-6600 Reference Manual R-167
Casio QT 6600 | Reference Manual - Page 168
Read and Reset PLU (by range) X 0010074 PLU - Mode / Report code / Report title / Z No. (Z only) 12 - House Bon quantity (can be skipped) #0001 68.25% - PLU No. (can be skipped) / Sales ratio (can be skipped) PLU0002 25 •32.00 DISCOUNT -5.00 HOUSE BON QTY 10 #0002 3.2% TL 75 •
Casio QT 6600 | Reference Manual - Page 169
•0.00 - PLU No. (can be skipped) •0.00 TL 0 •0.00 DISCOUNT •0.00 PLU zero sales (by group / dept / subdept / order) X 1100014 PLU GROUP01 PLU0001 DISCOUNT #0001 PLU0002 - stock level / Current stock - PLU No. (can be skipped) * 20 - * short stock QT-6600 Reference Manual R-169
Casio QT 6600 | Reference Manual - Page 170
Read and Reset PLU stock (by group / dept / subdept / order) X 1000064 PLU STOCK - Mode only) •82.55 - Subdepartment descriptor / Counter / Amount -1.00 - Discount total (can be skipped) - Sales ratio (can be skipped) •32.00 -2.00 TL 151 •156.55 DISCOUNT -3.00 100.00% Subdepartment (by
Casio QT 6600 | Reference Manual - Page 171
- Department descriptor / Counter / Amount DISCOUNT -1.00 - Discount total (can be skipped) 70.82% - Sales ratio (can be skipped) DEPT02 25 •32.00 DISCOUNT -2.00 27.45% TL 49 •114.55 DISCOUNT discount field treats as stock field. Stock -22.234 QT-6600 Reference Manual R-171
Casio QT 6600 | Reference Manual - Page 172
123 - Mode / Report code / Report title / Z No. (Z only) •63.54 - Time frame / Net counter / Net amount •63.54 - Sales ratio (can be skipped) / Customer counter / MDST amount •122.55 •122.55 Monthly sales Z 0001020 MONTHLY 123 - Mode / Report code / Report title / Z No. (Z only) 7 ...... - Day
Casio QT 6600 | Reference Manual - Page 173
No. REG C01 07-01-2005 12:34 001029 - Mode / Clerk / Date / Time / Consecutive No. CHECK No.001245 12CT #000121 - Check No. / Cover No Mode / Report code / Report title REG C01 1 PLU0055 0.12% %TL CASH P1 C01 X/Z C01 X 0100015 MC #03 07-11-2005 16:34 001029 QT-6600 Reference Manual R-173
Casio QT 6600 | Reference Manual - Page 174
character / Social Security No. Monday 12-20-03 - Day of the week / Date IN OUT BRK JOB# TIP WORK 08:00-10:00 00:15 12 •12.34 01:45 - Shift 1: Clock-in / Clock-out / Break / Job code / Tip / Work time 12:00-**:** 00:10 01 •0.00 **:** - Shift 2: Clock-out shift *1 **:**-**:** - Shift
Casio QT 6600 | Reference Manual - Page 175
.62 TL •62,395.07 - Total Amount of all Time frame Hourly labor report Z 0001024 HOURLY LABOR 09:00->09:30 No 82.62% COST 0% NET SALES/HOUR COST/TRANSACTION 2 00:05 09:30->10:00 No / Z counter •12.34 - Customer group 01 descriptor / Counter / Totalizer •0.00 QT-6600 Reference Manual R-175
Casio QT 6600 | Reference Manual - Page 176
Read and Reset Customer open check (individual) X 0020047 CUSTOMER CUST No.111111 Mr. John SMITH BALANCE DISCOUNT FINALIZED GT DISCOUNT GT 1-2-3 Hon-machi Shibuya-ku Tokyo JAPAN ZIP-
Casio QT 6600 | Reference Manual - Page 177
DISCOUNT No 2 •10.46 - Discount total FREE ORDER No 23 •120.46 TL No 25 •130.92 Simple time and attendance X 0001023 TIME ATTENDANCE - Mode / Report code / Report title item) @2 : @7 •19.29 TOTAL ITEMS: 0001234/ 100000 - Items / Allocated records QT-6600 Reference Manual R-177
Casio QT 6600 | Reference Manual - Page 178
Read and Reset Scanning PLU sales (by group / department / subdepartment) X 0010026 SALES REPORT #0001-0010 - Mode / Report code / Report title - Range (group / department / subdepartment) DEPT01 - Group / department / subdepartment descriptor #4911177008 ERASER 1 •1.00 - OBR code - Item
Casio QT 6600 | Reference Manual - Page 179
.93 @2 : @7 •19.29 Scanning PLU zero sales (by group / department / subdepartment) X 0060026 ZERO SALES #0001-0010 DEPT01 #4911177008 ERASER 28-02-2008 #4901351036723 / department / subdepartment descriptor - OBR code - Item decriptor / Last update date QT-6600 Reference Manual R-179
Casio QT 6600 | Reference Manual - Page 180
Read and Reset Not found PLU X 0010027 NOT FOUND PLU C01 #4911177008 DEPT01 5 DISCOUNT •5.00 -1.98 - Mode / Report code / Report title - Clerk - OBR code - Link department decriptor / Counter /
Casio QT 6600 | Reference Manual - Page 181
A-1. Function key list R-182 QT-6600 Reference Manual R-181
Casio QT 6600 | Reference Manual - Page 182
sale Non-add Non-add / No sale Not found PLU Number of customer OBR Old check Open Open2 Open check Operator number Operator read / reset Order character change BREAK-IN/OUT CANCEL CASH CHARGE CK.E CHKP VAT Worktime System keys Numeric POST ENTRY %+ PRC PRICE CHANGE PRCINQ QT RECALL RCT RCT ON/OFF
Casio QT 6600 | Reference Manual - Page 183
ID R-196 A-2-9. Hourly sales file R-197 A-2-9-1 Hourly sales (daily, periodic/consolidation R-197 A-2-10. Monthly sales file R-197 A-2-10-1 Monthly sales (daily, periodic/consolidation /consolidation R-199 A-2-13. IDC file R-200 A-2-13-1 IDC file (1 R-200 QT-6600 Reference Manual R-183
Casio QT 6600 | Reference Manual - Page 184
13-2 IDC file (2 R-200 A-2-13-3 IDC file (3 R-200 A-2-13-4 IDC link ...R-200 A-2-14. Time & Attendance file R-201 A-2-14-1 Hourly / Labor R-201 A-2-14-2. Work time file R-201 A-2-14-3. Time zone file R-202 A-2-14-4. Employee file R-202 A-2-14-5. Job code file R-202 A-2-14-6. Schedule file
Casio QT 6600 | Reference Manual - Page 185
217 A-2-49-2 Touch screen key table R-217 A-2-49-3 System connection table R-217 A-2-49-4 I/O parameter table R-218 A-2-49-5 Printer connection table R-218 A-2-49-6 System error log R-218 A-2-49-7 Auto program control R-218 A-2-49-8 Screen color control R-218 QT-6600 Reference Manual R-185
Casio QT 6600 | Reference Manual - Page 186
-11 A-2-49-12 A-2-49-13 A-2-49-14 A-2-49-15 A-2-49-16 A-2-49-17 A-2-49-18 Keyboard color definition R-219 Keyboard color theme R-219 Keyboard bitmap image R-219 TCP/IP control R-220 FTP Login Name R-220 FTP Server Name R-220 FTP Trans file R-220 Character key table file R-220 PS2 key table
Casio QT 6600 | Reference Manual - Page 187
credit amount Declared over credit amount Food stamp in drawer Food stamp cash change EBT in drawer EBT cash change Refund mode total Customer count Average sales per customer Check cashing service fee New balance fee future use Clerk commission 1 total Clerk commission 2 total Rec No. 031 032 033
Casio QT 6600 | Reference Manual - Page 188
(daily) File No.: 003 Max. allocatable records: 99 0 16 26 29 32 35 36 37 41 47 48 53 58 63 Character Program Link @ HALO Pulldown Group link Counter Totalizer Discount totalizer Double Bon Order char. link Order Color link A-2-3-2 Subdepartment (periodic/consolidation) File name
Casio QT 6600 | Reference Manual - Page 189
Max. allocatable records: 9999 24 34 37 40 43 46 49 51 54 55 56 60 Program Link @ HALO Random code Unit stock Minimum stock Set menu link Double Bon Order char. link : 9999 24 34 37 40 43 46 4950 Program Link 2nd@ 2nd Q'ty Unit stock Not used Not used QT-6600 Reference Manual R-189
Casio QT 6600 | Reference Manual - Page 190
: 9999 42 49 54 59 Link 2 ~ 8 PGM2 ~ 8 Counter Totalizer Counter shift 2 shift 2 shift 3 Unit price shift 2 Unit price shift 3 Unit price shift 4 Unit price shift 5 Unit price shift 6 Unit price shift 7 Unit price shift 8 64 69 74 79 84 89 94 99 104 109 114 119 Totalizer Counter
Casio QT 6600 | Reference Manual - Page 191
used Mix & match A-2-5-3 Scan Mix & match (daily) File name: Scan Mix & match (daily) 0 16 19 23 File No.: 056 Max. allocatable records: 99 29 39 44 49 Character PGM Free . allocatable records: 99 Max. allocatable records: 99 0 5 10 Counter Totalizer QT-6600 Reference Manual R-191
Casio QT 6600 | Reference Manual - Page 192
26 31 34 37 38 39 PGM Link @ Price level not used Mix & match Status A-2-5-6 Multi EAN link File name: Multi EAN link file 0 6 12 OBR code OBR code Link item Parent item A-2-5-7 Non PLU table File name: Non PLU table file 0 5 Program
Casio QT 6600 | Reference Manual - Page 193
of the programming manual. Pulldown group field (for PLU, subdepartment, department) Refer to the "Field 21-066" on page 203 of the programming manual. Color link field (for subdepartment, department) Refer to the "Field 22-066" on page 203 of the programming manual. QT-6600 Reference Manual R-193
Casio QT 6600 | Reference Manual - Page 194
File Format A-2-7. Group file A-2-7-1 Group (daily) File name: Group (daily) File No.: 006 Max. allocatable records: 99 0 16 21 26 Character Counter Totalizer A-2-7-2 Group (periodic/consolidation) File name: Group (periodic 1) File name: Group (periodic 2) File name: Group (daily
Casio QT 6600 | Reference Manual - Page 195
the programming manual. Function control 5 Refer to the "Record 08-067" on page 193 of the programming manual. Arrangement control Refer to the "Record 09-067" on page 194 of the programming manual. Report control Refer to the "Record 10-067" on page 195 of the programming manual. QT-6600 Reference
Casio QT 6600 | Reference Manual - Page 196
.: 030 Max. allocatable records: 99 Record No. File No. A-2-8-4 Clerk (i-Button) key ID File name: Clerk (i-Button) key ID 0 12 17 i-Button key ID character Program File No.: 027 Max. allocatable records: 300 R-196
Casio QT 6600 | Reference Manual - Page 197
sales (daily) File name: Hourly sales (periodic 1) File name: Hourly sales (periodic 2) File name: Hourly sales (daily consolidation) File name: Hourly sales (periodic 1 consolidation) File name: Hourly sales Totalizer Counter Totalizer (Gross) (Gross) (Net) (Net) QT-6600 Reference Manual R-197
Casio QT 6600 | Reference Manual - Page 198
File No.: 031 Max. allocatable records: 480 024 Record No. File No. Link record No. Always "0" Link file No. Description Choice Significant number Significant number Program code :::: D8 D7 D6 D5 ; D 4 ::: D3 D2 D1 R-198
Casio QT 6600 | Reference Manual - Page 199
24 30 36 38 40 41 43 45 46 48 50 51 53 55 56 58 60 61 63 65 66 Program Random code Work Work Rec. No. File No. Quantity Rec. No. File No. Quantity Rec. No. File records: 99 Max. allocatable records: 99 Max. allocatable records: 99 0 5 10 Counter Totalizer QT-6600 Reference Manual R-199
Casio QT 6600 | Reference Manual - Page 200
records: 100000 File No.: 359 Max. allocatable records: 100000 File No.: 659 Max. allocatable records: 100000 Refer to the page 75 ~ 81 of this manual for each IDC data in detail. A-2-13-4 IDC link File name: IDC link 01 2 4 6 File No.: 804 Max. allocatable records: 999 Link PGM Record
Casio QT 6600 | Reference Manual - Page 201
) Rec#001 (Second week) Rec#043~#045: Correspond to 1st day of the week of Employee • • • 01 4 6 8 13 15 17 18 Rec#002 (First week) Cash tip declare Job code CLOCK-IN date CLOCK-IN time CLOCK-OUT time WORK time BREAK time EDIT flag QT-6600 Reference Manual R-201
Casio QT 6600 | Reference Manual - Page 202
into some time zones, and assign the length of one cycle per zone. 024 6 Start time End time Cycle Refer to page 60 of the programming manual for Job code (4) Clerk No. Employee No. Refer to page 62 of the programming manual for details. A-2-14-5. Job code file File name: Job code 0 1617 20
Casio QT 6600 | Reference Manual - Page 203
024 7 11 15 16 17 File No.: 013 Max. allocatable records: 9999 Work Work Personal No. Clock-in time Clock-out time Not used Clock-out reason A-2-14-8. Clock-out reason file File name: Clock-out reason 0 16 Character QT-6600 Reference Manual File No.: 944 Max. allocatable records: 10 R-203
Casio QT 6600 | Reference Manual - Page 204
16 19 24 29 Character Counter Totalizer Program Refer to page 54 of the programming manual for details. A-2-15-2 Void table (periodic No. of Totalizer customer Min. check # Max. check # not used A-2-16-2 Table analysis (periodic/consolidation) File name: Table analysis (periodic
Casio QT 6600 | Reference Manual - Page 205
Max. allocatable records: 3 (fixed) Max. allocatable records: 3 (fixed) Max. allocatable records: 3 (fixed) Max. allocatable records: 3 (fixed) Max. allocatable records: 3 (fixed) Max. allocatable records: 3 (fixed) 0 8 Totalizer QT-6600 Reference Manual R-205
Casio QT 6600 | Reference Manual - Page 206
: 20 62 78 82 98 102 107 112 117 122 Type Print control Character Program Character Program Character Program Character Program Not used Counter Spent total Not used Customer group name Credit limit Discount 1 Discount 2 Discount 3 Discount 4 A-2-18-3 Customer group (periodic/consolidation
Casio QT 6600 | Reference Manual - Page 207
Check tracking Clerk interrupt Display control (not used) Order control (2) Touch screen (not used) (not used) (not used) Time & Attendance Store / Recall range Auto check No. range (not used) Automatic creating customer No. range (not used) (not used) Customer control (1) Customer control (2) Sound
Casio QT 6600 | Reference Manual - Page 208
A-2-21-1 Report header File name: Report header 0 16 Character File No.: 024 Max. allocatable records: 55(fixed) Refer to page 135 of the programming manual for details. A-2-22. Tax table file A-2-22-1 Tax table File name: Tax table 0 4 67 8 10 12 14 74 Rate Actual value File No
Casio QT 6600 | Reference Manual - Page 209
R-209 QT-6600 Reference Manual File No.14 Record No.15 File No.15 Record menu table A-2-24. Set menu table file Keytop text 28 Keytop text 1 Character Program Win color link Key type Record No. 1 File No. 1 Key color link 1 not used Record No. 2 File No. 2 Key color link 2 Record No. 28 File
Casio QT 6600 | Reference Manual - Page 210
File name: Receipt / Slip message 0 Character File No.: 032 Max. allocatable records: 96 40 Refer to page 132 of the programming manual for details. A-2-27. Check endorsement message file A-2-27-1 Check endorsement message File name: Check endorsement message 0 File No.: 033 Max. allocatable
Casio QT 6600 | Reference Manual - Page 211
A-2-31-1 Graphic logo (external printer) File name: Graphic logo (external printer) 0 13 Graphic data File No.: 047 Max. allocatable records: 432 (fixed) or 864 (fixed) QT-6600 Reference Manual R-211
Casio QT 6600 | Reference Manual - Page 212
File name: Scheduler 0 2458 12 14 File No.: 062 Max. allocatable records: 99 Start time End time Interval 1 Interval 2 Arrange tbl No. file No. Not used Refer to page 48 of the programming manual for details. A-2-33. Order character file A-2-33-1 Order character File name: Order character
Casio QT 6600 | Reference Manual - Page 213
records: 700(fixed) 0 3 4 67 Check number Key type Bitmap link not used Refer to page 182 of the programming manual for details. A-2-37. Clerk pop-up window definition file A-2-37-1 Clerk pop- 3. Sampling frequency; 11.025 / 22.050 / 44.100 kHz 4. 16 bit monaural QT-6600 Reference Manual R-213
Casio QT 6600 | Reference Manual - Page 214
File Format A-2-39. Add on VMP file A-2-39-1 Add on VMP file File name: Add on VMP 0 Data File No.: 040 Max. allocatable records: 999 51 A-2-40. Intelligent EJ file A-2-40-1 Intelligent EJ file File name: Intelligent EJ 0 Data File No.: 050 Max. allocatable records: 100000 101 A-2-41. Menu title
Casio QT 6600 | Reference Manual - Page 215
814 Max. allocatable records: 9999 Program not used Color Link Price 2 Price 3 Work A-2-46. External device serial number file A-2-46-1 External device serial number file File name: External device serial number 03 File No.: 920 Max. allocatable records: 4 PGM QT-6600 Reference Manual R-215
Casio QT 6600 | Reference Manual - Page 216
PLU character file File name: Additional PLU character File No.: 941 Max. allocatable records: 9999 0 7 31 32 PLU code Character PGM A-2-48. Free function list file A-2-48-1 Free function list file File name: Free function list 02 File No.: 946 Max. allocatable records: 99 Rec-No. R-216
Casio QT 6600 | Reference Manual - Page 217
001 002 Hard key code not used for Disp on/off A-2-49-2 Touch screen key table File name: Touch screen key table 0 2 4 5 6 89 Keytop text File No.: 174 Max. allocatable records: 2280(fixed) 33 Func code Rec No. Key type Color link Bitmap link not used A-2-49-3 System connection table File name
Casio QT 6600 | Reference Manual - Page 218
No. Backup printer No. Type Refer to page 176 of the programming manual for details. A-2-49-6 System error log File name: System error log 0 2 4 6 7 9 11 File No.: 999 Max. allocatable records: 999 Terminal No. Date Time Operation Error code Error function Refer to page 100, 232, 233 of
Casio QT 6600 | Reference Manual - Page 219
. allocatable records: 100 0 9 Program Refer to page 70 of the programming manual for details. A-2-49-11 Keyboard bitmap image File name: Keyboard bitmap image (for single key) File No (92 x 77) [84 x 159] (92 x 162) [84 x 159] (92 x 162) [179 x 159] (192 x 162) QT-6600 Reference Manual R-219
Casio QT 6600 | Reference Manual - Page 220
server name 0 20 26 46 File No.: 912 Max. allocatable records: 9 62 78 98 Server title IP address not used Login-ID Password Login folder name Refer to page 73 of the programming manual for details. A-2-49-15 FTP Trans file File name: FTP trans file 0 20 22 24 File No.: 913 Max
Casio QT 6600 | Reference Manual - Page 221
Location (X2) Location (Y2) Key type Location (X1, Y1) Key Location (X2, Y2) Rec-001 ~ 080: Full screen check window 1 Rec-081 ~ 160: Full screen check window 2 Rec-161 ~ 240: Full screen check window 3 Key type • No key: 00 • Rectangular key: 01 • Circular key: 02 QT-6600 Reference Manual R-221
Casio QT 6600 | Reference Manual - Page 222
File Format R-222
Casio QT 6600 | Reference Manual - Page 223
A-3.Counter and Totalizer calculation method R-224 A-3-1 Fixed totalizer file R-224 QT-6600 Reference Manual R-223
Casio QT 6600 | Reference Manual - Page 224
and counters are calculated using the opposite sign. A-3-1 Fixed totalizer file Total or counter Gross sales quantity Gross sales amount Net sales quantity Net sales amount Medium in drawer (Cash, charge, check, credit) Increments or Decrements by Number of products registered for Departments
Casio QT 6600 | Reference Manual - Page 225
(Department, Subdepartment, PLU, Scan PLU) + Last item void amount + Previous item void amount + Refund amount} + {Plus, Minus, Premium, Discount, Coupon + Last item void amount} Net sales total - add-on tax - add-in tax - commission QT-6600 Reference Manual R-225
Casio QT 6600 | Reference Manual - Page 226
Calculation method R-226
Casio QT 6600 | Reference Manual - Page 227
A-4. Error messages R-228 A-4-1 Error messages R-228 A-4-2 Operation prompt R-231 A-4-3 System error code R-232 QT-6600 Reference Manual R-227
Casio QT 6600 | Reference Manual - Page 228
error occurs on a QT-6600 terminal, a buzzer sounds and the appropriate error message appears on the main display, indicating what action to take. The following table lists the error messages and describes the action to take. Prompt message Meaning Action Operator mistake. E001 Wrong mode. E003
Casio QT 6600 | Reference Manual - Page 229
take it off from system "****" means ECR logical ID. Data mismatch has occurred. During picking up During bill copy During media change During clerk transfer Follow the prompt message. Follow the prompt message. Follow the prompt message. Follow the prompt message. QT-6600 Reference Manual R-229
Casio QT 6600 | Reference Manual - Page 230
the prompt message. Program the arrangement again. operation attempts to operate BREAK-IN. Sign on after you clock-in or break out. Follow the prompt message. Employee Report has not been reset. Follow the prompt message. Time Register active item. Insert CF card. Check the CF card. Format or use
Casio QT 6600 | Reference Manual - Page 231
during clock-in This procedure stops system maximum 60 sec. OK ? Enter # Enter Alphacode! Items not found! Alert before flash memory clear. Registering Non-add after RC / PD. To search the appropriate item, enter goods name. Items cannot be found by item searching. QT-6600 Reference Manual R-231
Casio QT 6600 | Reference Manual - Page 232
0075 0076 0077 0078 0079 0081 Meaning Handler access error (software) Cannot execute handler (system configuration) Break by PC Break by ECR DSR off before command phase Received illegal packet CNET receive error Illegal termination by sender Received illegal packet during receiving data packets
Casio QT 6600 | Reference Manual - Page 233
use Error while getting priority Fail to change temporary priority Error semaphore operation to keep resource Fail to get new sled Error while getting semaphore Error to operate semaphore Error during delay Error during termination processing FTP client syntax error QT-6600 Reference Manual R-233
Casio QT 6600 | Reference Manual - Page 234
Error messages R-234
Casio QT 6600 | Reference Manual - Page 235
reset R-96 C Canadian tax P-35 cancel R-38, R-140, R-182, P-25, P-109 cash P-94 cash amount tendered R-30, R-182, P-25 cash 86, P-197 clerk detail link R-196, P-20 clerk feature P-185 clerk interrupt R-17, R-48, R-98, R-121 collection/consolidation system R-19 COM port QT-6600 Reference Manual R-235
Casio QT 6600 | Reference Manual - Page 236
35, R-182, P-25 food stamp system P-35 food stamp tender R-30, R-182, P-25, P-96 foreign currency P-134 free function R-167 free function list R-216, P-22, hostitality feature P-15 hourly item R-57, R-175, R-198, P-20 hourly item link R-198, P-63, P-180 hourly labor R-175, R-201, P-20 hourly sales
Casio QT 6600 | Reference Manual - Page 237
R-182, P-25, P-104 non-add / no sale R-32, R-182, P-25, P-104 normal receipt R-31, R-182, P-25 QT-6600 Reference Manual Norwegian rounding P-35 not found PLU R-180, R- P-92 presetting date P-140 presetting time P-140 price R-33, R-182, P-25 price change R-151, R-182, P-25, P-115 price inquiry R-30,
Casio QT 6600 | Reference Manual - Page 238
PLU shift R-191, P-19 scanning system P-15 schedule R-58, R-203, P-20, P-62, P-178 scheduler R-212, P-21, P-48, P-175 screen color P-182 screen color control R-218, P-66 screen logo R-215, P-22 scroll area R-12 R-238 seat number R-37, R-182, P-25 second unit price R-34, R-182, P-25 selective item
Casio QT 6600 | Reference Manual - Page 239
71, P-72, P-184 terminal file R-23 text print R-30, R-182, P-25, P-97 text recall R-30, R-182, P-25, P-97, P-132, P-148 time & attendance R-58, P-20, P-61 time calculation R-159 time zone R-202, P-20, P-60, P-177 tip R-31, R-182, P-25, P-99 touch screen key table R-217, P-18 touch screen panel R-10
Casio QT 6600 | Reference Manual - Page 240
c CASIO COMPUTER CO., LTD. 6-2, Hon-machi 1-chome Shibuya-ku, Tokyo 151-8543, Japan MA0901-00501A Printed in Japan QT-6600REF*E

Match case Limit results 1 per page

QT-6600

Touch Screen Smart Terminal

———————————————————————

Reference Manual

Version

1.1 December 2008