Celestron CGX-L Equatorial Mount Without Tripod CGX-L Mount
Celestron CGX-L Equatorial Mount Without Tripod Manual
View all Celestron CGX-L Equatorial Mount Without Tripod manuals
Add to My Manuals
Save this manual to your list of manuals |
Celestron CGX-L Equatorial Mount Without Tripod manual content summary:
- Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 1
EQUATORIAL MOUNT AND TRIPOD INSTRUCTION MANUAL Model #91531 - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 2
NexStar+ Hand Control 12 Object Catalog 16 Slewing to an Object 16 CGX Main Menu Tree 23 Appendix A: Upgrading the Firmware in Your Mount and Hand Control 25 Appendix B: Care and Maintenance 26 Appendix C: PWI Telescope Control Software 26 Celestron Two Year Limited Warranty 27 2 | ENGLISH - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 3
Introduction The CGX-L German Equatorial Mount and Tripod was designed to support your telescope for both visual observation and astrophotography. When used correctly, the CGX-L serves as a steady platform, with accurate pointing and tracking for your telescope. Please review these instructions to - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 4
Overview Dovetail Lock Knobs DEC Clutch Lock Lever Carry Handle R.A. Clutch Lock Lever Counterweights Counterweight Shaft Counterweight Stop Nut Tripod Hand Control Holster Hand Control Accessory Tray Dovetail Saddle AUX 3 and 4, and Autoglider See figure 1.3 On/Off Switch See figure 1.2 Aux 1 & Aux - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 5
Autoguide Port USB Port Latitude Scale AUX 3 and 4 AUX 1 and 2 Power Input Belt Drive Windows Figure 1.2 Overview Autoguider Autoguider USB Port Figure 1.3 Overview ENGLISH | 5 - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 6
your mount. If you purchased the CGX-L by itself, the kit includes one 22lbs counterweight. If you purchased the CGX-L with mount as shown in Figure 1.1. Setup the Tripod 1. Stand the tripod upright and pull the tripod legs apart until each leg is fully extended. 2. Remove the Tripod Support - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 7
mount and tripod, roughly position the mount so the mount. Tighten the telescope in place with the two lock knobs (Figure 5). The CGX-L fits the large Celestron Mount Right Ascension Axis: Carefully unlock the clutch lever for R.A. and position the counterweight shaft so that it's horizontal. Without - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 8
, an Equatorial mount tracks the sky in one motion, keeping the object centered in the eyepiece or camera. CGX-L's polar alignment system consists of an altitude adjuster and azimuth adjuster (Figure 8). An optional polar alignment scope is available from Celestron and attaches to the mount. The - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 9
the power switch on. 4. When the hand control displays "CGX-L Ready", press ENTER twice. The mount will proceed to move to the home switch position. 5. press ENTER The SkyTour (keypad 5) is a great way to explore the sky without consulting a star chart. The Tour function will generate a list of the - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 10
Precise Polar Alignment Celestron's All-Star Polar Alignment allows you to precisely polar align your mount without using Polaris or a polar axis finder. This software-assisted polar alignment allows you to choose a convenient star. Prerequisite: The CGX-L must first be aligned with a Two Star, One - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 11
is directly above a tripod leg (recommended default), or rotated so that the counterweight shaft is between two of the tripod legs for additional low to use at higher latitudes (Figure 10.2). USB Port on the Mount The USB port on the CGX-L is used to interface with your PC for use with the dedicated - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 12
2. Align: Instructs the telescope to in the eyepiece or to manually slew your telescope. 4. objects and others. 7. Option (Celestron Logo): Works similar to the have an angled shape to make it easier to locate without looking. 1 2 3 4 5 6 7 15 14 troubleshooting tips. For your convenience, it - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 13
the Database Setup section of the manual. • Stars - The Stars the OPTION button (the Celestron logo) and press OBJECT speed slew rate to precise guiding rate or anywhere in between per second, depending on the mount) and is used for slewing speed up the motors without having to choose a speed. - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 14
time by holding down the Option button (the Celestron logo) for 10 seconds while powering up the the finder, press ENTER. The display will then instruct you to center the star in the field of This is essential for an accurate calibration of the mount. Finally, you can choose to continue to add - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 15
without having to re-enter additional information. • If you have used the computer-assisted polar alignment method and have manually moved the mount, it may be necessary to re-align the mount button until you are at the main menu. 4. With CGX Ready displayed, press the ALIGN key on the hand control - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 16
telescope to slew to the object or hold the OPTION button (the Celestron logo) and press OBJECT INFO to see information about the object you 2. Use the SCROLL buttons to select Best of Tonight. 3. The CGX-L mount will automatically slew in azimuth to its starting position which will help minimize - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 17
The CGX mount mount being used to support the telescope. The telescope has three different tracking modes: Motor Speed Button Pressing the MOTOR SPEED button (12) allows you to instantly change the speed rate of the motors from high speed slew rate to precise guiding without troubleshooting - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 18
holding down the Option button (the Celestron logo) for 10 seconds while powering up when changing directions). The CGX-L anti-backlash feature allows to get the gears moving quickly without a long pause. • Negative is This can create confusion especially when guiding on a star when doing - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 19
the target object is accessible from both sides of the mount, selecting "Favor West" instructs the mount to point to the object as if it were on the mount to continue tracking in the same direction past the Meridian without the need to "flip" the telescope around to the opposite side of the mount - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 20
be a problem, the direction mount slews to a target. You can set the R.A. and Dec axes individually. The max speed of the CGX mount has built-in calibration routines allowing it to compensate for mechanical variation inherent in every German equatorial mount telescope manually while in control without - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 21
star by asking you to center the star in the eyepiece and pressing the Align button. Once synced on the star, you are free to manually move the mount in both axes in order to rebalance. When you are ready to slew the telescope to your next object, just remember to - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 22
the star in the eyepiece. The hand control then calculates the small difference between its GoTo position and its centered position. Using this offset, the mount will then slew to the desired object with enhanced accuracy. To use Precise GoTo: 1. Press the MENU button and use the Up/Down keys to - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 23
CGX-L Main Menu Tree Menu Tracking View Time-Site Hand Control Scope Setup Utilities User Objects Get RA-Dec GoTo RA Dec Identify Precise Goto Mode - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 24
CGX-L Main Menu Tree Scope Setup Setup Time-Site Anti-Backlash Filter Limits Direction Button GoTo Approach Autoguide Rates Meridian Mount Settings RA Limits Custom Rate 9 Custom Site City Database RA Positive RA Negative Dec Positive Dec Negative RA Button Dec Button RA Approach Dec Approach - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 25
your PC to your hand control. 3. Plug power into the CGX-L and power it on. 4. Open Celestron Firmware Manager (CFM) 5. CFM will check your hardware and 4.12VDC 3A power for the mount Aux Port NexStar+ Hand Control 12VDC 3A Power Supply Figure 12.1 Updating Mount and Hand Control Firmware User - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 26
software from this link. Instructions on software usage can also be found from the CGX-L's product support page. http://www.celestron.com/support/manuals-software/files/ CGX-L-control-software-download Reminder: The PWI control software links directly to the USB port on the mount, instead of the mini - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 27
without prior notice to you, any model or style telescope. If warranty problems arise, or if you need assistance in using your telescope mount contact: Celestron Customer Service not installed and used in accordance with the instructions, may cause harmful interference to radio communications. - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 28
- Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 29
MONTURE ÉQUATORIALE ET TRÉPIED MODE D'EMPLOI Modèle N°. 91531 - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 30
AUX 11 Port Autoguide 11 Commande à main NexStar 12 Catalogue des objets 16 Orientation vers un objet 16 Arborescence du menu principal CGX-L 23 Annexe A: Mettre à jour le micrologiciel de votre monture et de votre commande à main 25 Annexe B: Entretien et maintenance 26 Annexe C: Logiciel - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 31
trépied) Écrou et rondelle Support de commande à main Boîte 3: Contrepoids Contrepoids de 10 kg (22 lbs) Configuration système requise • La CGX-L nécessite une alimentation CC de 12 volts avec au moins 3 ampères. Un adaptateur secteur CA vers CC 12V 5A est vendu par Celestron et inclus un connecteur - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 32
Poignée de transport AD Levier de verrouillage du mouvement AD Contrepoids Barre de contrepoids Rondelle d'arrêt des contrepoids Trépied Support de commande à main Commande à main Plateau à accessoires Selle de queue d'aronde AUX 3 et 4, et Autoguider Voir Figure 1.3 Interrupteur d'alimentation [On - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 33
Port Autoguide Port USB Indicateur de latitude AUX 3 et 4 AUX 1 et 2 Port d'alimentation Fenêtres d'observation des courroies Figure 1.2 Présentation générale Autoguider Autoguider Port USB Figure 1.3 Présentation générale FRANÇAIS | 5 - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 34
Si vous avez acheté la CGX-L seule, alors la boîte comporte un contrepoids de 10 kg (22 lbs). Si vous avez acheté la CGX-L avec un tube optique sur la colonne centrale de manière à ce que les trois bras du plateau supportent chacun un pied du trépied. Figure 2.2 Positionnement du trépied 4. Vissez - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 35
d'aronde du télescope sur la selle de la monture. Fixez le télescope avec les deux molettes de verrouillage (Figure 5). La CGX-L peut recevoir la queue d'aronde large de Celestron de style CGE ainsi que les queues d'aronde de plus petite taille de style CG-5, qui sont compatibles avec les queues - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 36
autour du pied du trépied puis placez la commande à main dans le support. Brancher la commande à main Branchez la commande à main NexStar+ dans l' la CGX-L se compose d'un compensateur d'altitude et d'un compensateur d'azimut (Figure 8). Un viseur polaire facultatif est disponible chez Celestron et - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 37
vous devrez saisir la longitude, la latitude et le fuseau horaire de votre position. 6. Une fois le site sélectionné, définissez la date et l'heure. La CGX-L est équipée d'un système RTC (Real-Time Clock) qui mémorise les informations de la date, de l'heure et de position jusqu'à la prochaine fois - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 38
polaire précis La fonction All-Star Polar Alignement de Celestron vous permet d'effectuer un alignement polaire précis sans alignement Go to. Champ de mouvement de la monture Limitation de champ logicielle La CGX-L utilise un limiteur logiciel pour les capteurs qui détecte lorsque la monture s' - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 39
(Figure 10,2). Port USB sur la monture Le port USB sur la CGX-L fait office d'interface pour votre PC lorsque vous souhaitez utiliser un ni un autre accessoire au port autoguide. Cela pourrait entraîner des dommages. La CGX-L est équipée d'un port d'autoguidage redondant, localisé à côté des ports - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 40
pistage et objets définis par l'utilisateur et autres. 7. Option (Logo Celestron): Fonctionne comme le bouton MAJ d'un clavier et peut être utilisée ées saisies par erreur. 10. Sky Tour: Active le mode tour guidé, lequel recherche tous les meilleurs objets célestes et oriente automatiquement votre - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 41
objet que vous désirez voir. Appuyez sur ENTRÉE pour faire orienter le télescope vers l'objet, ou maintenez enfoncé le bouton OPTION (logo Celestron) et appuyez sur INFO OBJET pour consulter l'information sur l'objet sélectionné. ATTENTION: Ne faites jamais pivoter le télescope lorsque quelqu'un est - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 42
ficher lors de la première utilisation du contrôle manuel. Cette option peut également être affichée en maintenant le bouton Option (le logo Celestron) pendant 10 secondes pendant l'allumage du télescope. Procédures d'alignement Pour que le télescope pointe avec précision vers des objets dans le ciel - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 43
2. Centrez l'objet avec soin dans l'oculaire. 3. Une fois centré, appuyer sur RETOUR pour revenir au menu principal. 4. Une fois le message CGX-L Prêt affiché, appuyez sur ALIGNER pour sélectionner une étoile d'alignement parmi les options disponibles. 5. L'afficheur vous demandera alors quelle étoile - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 44
maintenez enfoncé la touche OPTION (logo Celestron) et appuyez sur INFO OBJET pour consulter blessures pourraient en résulter. Bouton SkyTour La monture CGX-L offre une fonction de tour qui permet à filtre personnalisé. Pour activer la fonction de visite guidée, appuyez sur SKY TOUR sur le bloc de - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 45
é comme raccourci au catalogue Messier. Bouton menu La monture CGX-L contient plusieurs fonctions de réglage définies par l'utilisateur manière dont le télescope suit un objet selon le type de monture utilisée pour supporter le télescope. Le produit possède trois différents • EQ Nord - Pour suivre - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 46
en maintenant le bouton Option (le logo Celestron) pendant 10 secondes pendant l'allumage du té de directions). La fonction anti-rebond de l'CGX-L permet à l'utilisateur de compenser le rebond de données (ou en sélectionnant la fonction Visite Guidée), la commande à main affichera seulement les objets - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 47
Pour modifier la direction d'approche GoTo, simplement sélectionner GoTo Approach du menu Scope Setup, sélectionner soit l'approche Altitude soit l'approche Azimut, choisir positif ou négatif et appuyer sur Entrée. ASTUCE : Pour minimiser les effets négatifs du rebond d'engrenage sur la précision de - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 48
monture s'oriente vers une cible. Vous pouvez alors définir les axes AD et DEC de manière individuelle. La vitesse maximum de la CGX-L est de 4°/ seconde (3°/seconde par défaut). Menus Utilitaires Parcourez le MENU (9) pour avoir accès à une variété d'options utilitaires avancées du télescope, comme - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 49
objet dans la base de données. Enregistrer dans Base de données (Db) • Objet: Cette fonction vous permet de créer votre propre visite guidée d'objets de base de données en vous permettant d'enregistrer la position courante du télescope et d'enregistrer le nom de l'objet en sélectionnant un des - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 50
Identifier Le mode Identification recherchera dans les listes ou catalogues de la base de données de la monture et affichera le nom et distances décalées des objets correspondants le plus proches. Cette fonction peut être utile dans deux cas. Tout d'abord, elle peut permettre d'identifier un objet non - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 51
Arborescence du menu principal CGX-L MENU Suivi Économie d'énergie EQ Nord EQ Sud Désactivé Taux Sidérale Solaire Lunaire Afficher heure-site Commande à main Site enregistré Éclairage des boutons É - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 52
Arborescence du menu principal CGX-L Réglage du Télescope Configurer heure-site Site personnalisé Utilitaires Base de données de villes Anti-rebond AD positive AD négative DEC positive DEC né - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 53
AUX1 ou AUX2. 2. Branchez un câble mini USB de votre PC à votre commande. 3. Branchez puis allumez la CGX-L. 4. Lancez le Gestionnaire des Micrologiciels Celestron (CFM). 5. CFM inspectera votre matériel et recherchera des mises à jour. CFM détectera automatiquement quels composants doivent être - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 54
é par PlaneWave Instruments. Téléchargez le logiciel depuis ce lien. Vous pourrez trouver les instructions d'utilisation du logiciel sur la page de produit de la CGX-L. http://www.celestron.com/support/manuals-software/files/ CGX-L-control-software-download Rappel : Le logiciel de contrôle PWI est en - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 55
limitations et exclusions susmentionnées pourraient ne pas s'appliquer à vous. Celestron Service à la clientèle 2835 Columbia Street Torrance, CA 90503 Tel , s'il n'est pas installé et utilisé conformément aux instructions du manuel, peut causer des interférences nuisibles aux communications radio. - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 56
- Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 57
PARALLAKTISCHE MONTIERUNG UND STATIV BEDIENUNGSANLEITUNG Modellnr. 91531 - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 58
USB-Anschluss 11 AUX-Anschluss 11 Autoguide-Anschluss 11 NexStar+ Handsteuerung 12 Objektkatalog 16 Zu einem Objekt schwenken 16 CGX Hauptmenübaum 23 Anhang A: Firmware-Upgrade der Montierung und Handsteuerung 25 Anhang B: Pflege und Instandhaltung 26 Anhang C: PWI Teleskopsteuerungssoftware - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 59
und Astrofotografie zu unterstützen. Bei sachgemäßer Verwendung dient das CGX-L als stetige Plattform mit präzisem Zeige- und Nachführfunktionen für Gegengewicht Systemvoraussetzungen • Das CGX-L benötigt 12 Volt Gleichstrom mit mindestens 3 Ampere. Celestron bietet eine Wechselstromauf - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 60
Übersicht SchwalbenschwanzArretierungen DEK-Kupplungsfeststellhebel Tragegriff R.A. Kupplungsfeststellhebel Gegengewichte Gegengewichtsschaft GegengewichtAnschlagmutter Stativ Tasche für die Handsteuerung Handsteuerung Zubehörablage Schwalbenschwanzsattel AUX 3 und 4 und Autoglider Siehe Abbildung - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 61
Autoguide-Anschluss USB-Port Breitenskalen AUX 3 und 4 AUX 1 und 2 Stromeingangsleistung Riementriebfenster Abb. 1.2 Übersicht Autoguider Autoguider USB-Anschluss Abb. 1.3 Übersicht DEUTSCH | 5 - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 62
ganzen Inhalt aus und befolgen die einzelnen Schritte, um Ihre Montierung zusammenzubauen. Wenn Sie nur das CGX-L gekauft haben, enthält das Set ein Gegengewicht von 22lbs. Wenn Sie den CGX-L mit einem großen optischen Tubus erworben haben, können weitere Gewichte dabei sein, um ein Gleichgewicht - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 63
Montierung. Ziehen Sie das Teleskop mit Hilfe der beiden Verriegelungsknöpfe (Abbildung 5) in seiner Position fest. Auf das CGX-L passt der große Celestron CGESchwalbenschwanz und der kleinere CG-5Schwalbenschwanz, der auch als Losmandy D (1) und Vixen (2) Schwalbenschwanz bekannt ist. 1: Testen Sie - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 64
ßen Sie die Handsteuerung nicht an Das Polar-Ausrichtungssystem von CGX-L besteht aus einer den Autoguide-Port an. Handsteuerung und digungen das Autogui- der-Kabel nicht an den AUX-Anschluss anschließen. Celestron bietet einen optionalen Polsucher an, der an die Montierung angebracht wird. Der - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 65
, müssen Sie die Länge, Breite und Zeitzone Ihres Standorts eingeben. 6. Nach Eingabe des Standorts werden Datum und Uhrzeit eingegeben. Das CGX-L verfügt über eine Echtzeituhr (RTC), die die Datums-, Zeit- und Standortinformationen für den nächsten Einsatz der Montierung, speichert. 5. Wählen Sie - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 66
Die All-Star Polar Ausrichtung von Celestron ermöglicht es Ihnen, Ihre Montierung präzise polar auszurichten, ohne Polaris oder einen Polsucher zu verwenden. Diese Softwareunterstützte Poljustierung ermöglicht Ihnen die Auswahl eines geeigneten Sterns. Voraussetzung: Die CGX muss zuerst mit ein zwei - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 67
wie das StarSense AutoAlign und SkyPortal WiFi Modul verwendet werden. Der CGX-L ist mit zwei zusätzlichen Aux-Anschlüssen unter dem Schwalbenschwanzsattel den Autoguider-Port an. Dies könnte zu Schäden führen. Der CGX-L ist mit einem redundanten Autoguider-Anschluss ausgestattet, der neben Aux 3 und - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 68
nächstgelegenen passenden Objekten an. 6. Menü: Zeigt Einstellungen und Funktionen an, wie Nachführungsrate, benutzerdefinierte Objekte und anderes. 7. Option (Celestron-Logo): Funktioniert ähnlich wie die SHIFT-Taste bei einer Tastatur und kann in der Kombination mit weiteren Tasten verwendet werden - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 69
des Objekts ein, das Sie anzeigen möchten. Drücken der EINGABE-Taste schwenkt das Teleskop auf das Objekt oder halten der OPTION-Taste (das Celestron Logo) und drücken der OBJEKT INFOTaste zeigt Informationen über das ausgewählte Objekt an. VORSICHT: Niemals das Teleskop schwenken, wenn jemand in - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 70
, wenn Sie Ihre neue Handsteuerung das erste Mal verwenden. Sie können sie auch zu jeder Zeit aufrufen, indem Sie die Option-Taste (das Celestron-Logo) für 10 Sekunden drücken, während das Teleskop eingeschaltet wird. Die Ausrichtung vornehmen Damit das Teleskop präzise auf Objekte im Himmel zeigen - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 71
das Objekt sorgfältig im Okular. 3. Sobald es zentriert ist, drücken Sie die BACK-Taste, bis Sie sich im Hauptmenü befinden. 4. Wenn CGX Ready angezeigt wird, drücken Sie die ALIGNTaste auf der Handsteuerung, um die Ausrichtungssterne unter den Optionen auszuwählen. 5. Sie werden dann auf dem Display - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 72
auf das Objekt, und durch Gedrückthalten der OPTIONS-Taste (das Celestron Logo) und Drücken der OBJEKTINFO-Taste werden Informationen über das ausgew bewegen und das Auge des Beobachters verletzen. Sternenhimmelstour-Taste Die CGX-L-Montierung enthält eine Tour-Funktion, die es Ihnen ermöglicht - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 73
- (links und rechts) Bewegung des Teleskops steuern. Das Teleskop kann mit neun verschiedenen Geschwindigkeitsraten gesteuert werden. Menü-Taste Die CGX-Montierung enthält viele benutzerdefinierte Setup-Funktionen, die dem Benutzer die Kontrolle über viele Teleskopfunktionen ermöglicht.. Alle Kon - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 74
zu jeder Zeit aufrufen, indem Sie die Option-Taste (das Celestron-Logo) für 10 Sekunden drücken, während das Teleskop eingeschaltet Handsteuerung gedrückt werden (besonders bei Richtungsänderungen). Die Anti-Backlash-Funktion CGX-L ermöglicht es dem Benutzer, das Spiel auszugleichen, indem ein Wert - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 75
HINWEIS: Um den Einfluss des Getriebespiels bei der Zeigegenauigkeit zu minimieren, sollten die Einstellungen für die Richtungstasten mit denen der GoTo-Automatik übereinstimmen. Standardmäßig werden die Richtungstasten Aufwärts und Rechts für das Zentrieren der Ausrichtungssterne verwendet, was - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 76
RA-Schwenkgrenzwert auf ein Objekt zu schwenken, begrenzt. Wenn dies ein Problem darstellt, kann die Richtung, in der das Teleskop ein Objekt nnen die RA- und DEK-Achsen separat einstellen. Die maximale Geschwindigkeit des CGX-L beträgt 4°/Sekunde (3°/Sekunde ist Standard). Utility-Menü Wenn Sie - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 77
Einstellen der Montierungsposition Das Menü zum Einstellen der Montierungsposition kann verwendet werden, um Ihre Ausrichtung beim Auskuppeln oder ähnlichen Umständen zu erhalten. Sie könnten diese Funktion beispielsweise nutzen, wenn die Montierung nach einer vollständigen Ausrichtung neu - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 78
Identifizieren Der Identifizierungsmodus durchsucht einen beliebigen Datenbankkatalog der Montierung bzw. Name und OffsetDistanzen des nächsten passenden Objekts werden aufgelistet und angezeigt. Diese Funktion kann zwei Zwecke erfüllen: Erstens kann sie zur Identifikation eines unbekannten Objekts im - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 79
CGX Hauptmenübaum Menü Nachführung Modus EQ Nord EQ Süd Aus Rate Siderisch Solar Lunar Uhrzeit-/Standort-Anzeige Gespeicherter Standort Handsteuerung Beleuchtungskontrolle: Tastaturstufe Anzeigeebene Scroll-Menü - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 80
CGX Hauptmenübaum Teleskops Aufbau Einrichtzeit am Standort Getriebespielnachstellung Filtergrenzen Richtungstasten Gehe zu Annäherung: Nachführungrate Meridian Einstellungen der Montierung RA Grenzwerte Benutzerdefinierte Rate 9: - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 81
2. Stecken Sie ein USB-Mini-Kabel von Ihrem PC auf das Hand-Steuerelement. 3. Schließen Sie das CGX-L an die Stromversorgung an und schalten Sie es ein. 4. Öffnen Sie den Celestron Firmware Manager (CFM) 5. Der CFM überprüft Ihre Hardware und sucht nach Updates. CFM wird automatisch bestimmen - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 82
Software unter diesem Link herunter. Anweisungen zur Softwareverwendung finden Sie auch auf der Produktsupportseite des CGX-L. http://www.celestron.com/support/manuals-software/files/ CGX-L-control-software-download Zur Erinnerung: Die PWI-Steuerungssoftware verbindet sich direkt mit dem USB-Anschluss - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 83
zutreffen. Diese Garantie gibt Ihnen bestimmte Rechte und darüber hinaus könnten Sie auch weitere Rechte haben, die von Land zu Land variieren. Celestron behält sich das Recht vor, jegliches Modell und jeglichen Teleskoptyp zu modifizieren oder aus der Produktlinie auszuschließen, ohne Ihnen dies - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 84
- Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 85
SOPORTE ECUATORIAL Y TRÍPODE MANUAL DE INSTRUCCIONES Modelo #91531 - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 86
NexStar 12 Catálogo de objetos 16 Desplazarse a un objeto 16 Árbol del menú principal CGX 23 Apéndice A: Actualización del firmware del soporte y el mando manual 25 Apéndice B: Cuidados y mantenimiento 26 Apéndice C: Software de control de telescopio PWI 26 Garantía limitada por dos años - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 87
Rosca y arandela Funda del mando manual Caja 3: Contrapeso Contrapeso de 10 kg (22 lbs) Requisitos del sistema • El CGX-L precisa de 12 voltios de alimentación CC con al menos 3 amperios de corriente. Dispone de una alimentación CA a 12VCC 5A de Celestron e incluye - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 88
R.A. Palanca de bloqueo de embrague Contrapeso Eje de contrapeso Rosca de retención de contrapeso Trípode Funda del mando manual Mando manual Bandeja de accesorios Soporte del machihembrado AUX 3 y 4, y Autoglider Consulte la figura 1.3 Interruptor de encendido/apagado Consulte la figura 1.2 Puertos - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 89
Puerto Autoguide Puerto USB Escalas de latitud AUX 3 y 4 AUX 1 y 2 Entrada de alimentación Ventanas del impulsor de correa Figura 1.2 Vista general Autoguider Autoguider Puerto USB Figura 1.3 Vista general ESPAÑOL | 5 - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 90
Montaje Desembale el contenido y siga estos pasos para montar el soporte. Si ha adquirido el CGX-L solamente, el trípode incluirá un contrapeso de 22 lbs (10 kg). Si ha adquirido el CGX-L con un tubo óptico grande, pueden incluirse más contrapesos para lograr el equilibrio. Nota: La llave allen de - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 91
una alineación polar más precisa más tarde con ayuda del mando manual informatizado. Mandos de bloqueo de machihembrado Añadir los contrapesos Retire la dos mandos de bloqueo (Figura 5). El CGX-L encaja en el machihembrado grande de tipo CGE de Celestron y el machihembrado más pequeño de estilo CG - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 92
del trípode y coloque el mando manual en la funda. Conexión del mando manual Conecte el mando manual NexStar+ incluido a uno de los deseada. El sistema de alineación polar CGX-L consiste en un regulador de alitud y un regulador de azimut (Figura 8). Celestron ofrece un catalejo de alineación polar - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 93
ón del soporte. Asegúrese de fijar el cable de alimentación con el conector de cañón estriado. 3. Encienda el interruptor. 4. Cuando el mando manual muestre "CGX-L Ready", pulse dos veces INTRO. El soporte procederá a mover a la posición de conmutación inicial. 5. Seleccione Base de datos de ciudades - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 94
las estrellas de Celestron le permite alinear alineación polar precisa. En este punto, no utilice el control manual para centrar la estrella. 5. Use los ajustes de altitud y de límite hasta que invierta la dirección. Alcance mecánico El CGX-L usa cableado interno, por lo que el soporte ha sido dise - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 95
puerto Autoguide solamente debe usarse para relés de cámara con autoguide. PRECAUCIÓN: No conecte nunca el mando manual NexStar+ ni otros accesorios al puerto Autoguide. Podría causar daños. El CGX-L está equipado con un puerto Autoguide redundante, situado al lado de Aux 3 y Aux 4 cerca del soporte - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 96
, objetos definidos por el usuario y otros. 7. Opciones (Logotipo de Celestron): Funciona de forma parecida a la tecla SHIFT de un teclado y puede 11,2 12. Velocidad del motor: Similar al botón Velocidad del mando manual NexStar original, le permite cambiar la velocidad del motor cuando se pulsan - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 97
de los catálogos de la base de datos del mando manual NexStar+. El mando manual tiene una tecla designada para cada categoría de objetos de su se desplace al objeto, o mantenga pulsado el botón OPCIÓN (el logo Celestron) y pulse INFORMACIÓN DE OBJETO para ver información sobre el objeto que - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 98
: La función Establecer idioma también puede aparecer la primera vez que use su nuevo mando manual. También puede iniciarlo en cualquier momento manteniendo pulsado el botón Opción (el logo Celestron) durante 10 segundos mientras el telescopio esté encendido. Procedimiento de alineación Para que el - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 99
en el ocular. 3. Una vez centrado, pulse el botón ANTERIOR hasta que esté en el menú principal. 4. Cuando se muestre CGX preparado, pulse la tecla ALINEAR en el mando manual para seleccionar estrellas de alineación de la lista de opciones. 5. La pantalla le solicitará la estrella de alineación que - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 100
al objeto, o mantenga pulsado el botón OPCIÓN (el logo Celestron) y pulse INFORMACIÓN DE OBJETO para ver información sobre el objeto el mando manual. 1. Pulse el botón SKY TOUR del mando manual. 2. Use los botones DESPLAZAMIENTO para seleccionar Lo mejor de esta noche. 3. El soporte CGX-L se mover - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 101
como acceso directo al catálogo Messier. Botón Menú El soporte CGX contiene muchas funciones de configuración definidas por el usuario, dise seguimiento - Además de poder mover el telescopio con los botones del mando manual, su telescopio seguirá continuamente un objeto celeste a medida que se mueve - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 102
use su nuevo mando manual También puede iniciarlo en cualquier momento manteniendo pulsado el botón Opción (el logo Celestron) durante 10 segundos mientras botones de flecha del mando manual (especialmente al cambiar direcciones). La función anti retroceso del CGX-L permite al usuario compensar el - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 103
se haya calibrado la configuración del soporte (consulte la sección Utilidades a continuación) los valores se guardan y se muestran en el mando manual. No se recomienda cambiar los valores de calibración. Sin embargo, cada configuración puede cambiarse si es necesario para mejorar el rendimiento del - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 104
los ejes R.A. y Dec de forma individual. La velocidad máxima del CGX-L es de 4º/segundo (3º/segundo por defecto). Menú de utilidades Desplazarse usuario seguirán guardados aunque se seleccione Configuración de fábrica. El mando manual le solicitará pulsar la tecla "0" antes de volver a la configuración - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 105
interno del telescopio. Al alinear, el telescopio seguirá recibiendo información de tiempo del RTC. Si desea usar la base de datos del mando manual para localizar las coordenadas de un objeto celeste para una fecha futura o pasada, deberá apagar el RTC para introducir manualmente una hora distinta - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 106
Identificar y buscando en los catálogos Objetos con nombre o Messier, el mando manual le hará saber que la Nebulosa del Anillo (M57) está a aproximadamente 6º y solicita al usuario centrarla cuidadosamente en el ocular. El mando manual calcula la pequeña diferencia entre su posición IrA y su posici - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 107
Árbol del menú CGX-L Menú Seguimiento Uhrzeit-/Standort-Anzeige Mando manual Configuración del telescopio Utilidades Objetos del usuario Obtener RA-Dec IrA RA Dec Identificar IrA preciso Modo EQ Norte EQ Sur Apagado Velocidad - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 108
Árbol del menú principal CGX-L Configuración del telescopio Configurar hora-lugar Compensación de retroceso Límites de filtro Botones de dirección Acercamiento IrA Velocidades de autoguía Meridiano Configuración - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 109
en el puerto AUX1 o AUX2. 2. Conecte un cable mini USB de su PC para el mando manual. 3. Conecte la alimentación al CGX-L y enciéndalo. 4. Abra el Gestor de firmware Celestron (CFM). 5. CFM comprobará el hardware y buscará actualizaciones. CFM determinará automáticamente los componentes que precisan - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 110
. Las instrucciones de uso del software también pueden encontrarse en la página de soporte de producto del CGX-L. http://www.celestron.com/support/manuals-software/files/ CGX-L-control-software-download Recordatorio: El software de control PWI conecta directamente con el puerto USB del soporte, en - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 111
8AM-4PM PST NOTA: Esta garantía tiene validez para clientes de EE.UU. y Canadá que hayan adquirido este producto en un vendedor autorizado de Celestron en EE.UU. y Canadá. La garantía fuera de EE.UU. y Canadá solamente tiene validez para clientes que hayan comprado en un distribuidor internacional - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 112
- Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 113
MONTATURA ALTAZIMUTALE E TREPPIEDE MANUALE D'USO Modello n. 91531 - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 114
AUX 11 Porta Autoguida 11 Pulsantiera NexStar 12 Catalogo oggetti 16 Rotazione verso un oggetto 16 Struttura menu principale CGX 23 Appendice A: Aggiornamento del firmware della montatura e pulsantiera 25 Appendice B: Cura e manutenzione 26 Appendice C: Software di controllo del telescopio - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 115
centrale del treppiede) Dado e rondella Fondina del controllo manuale Scatola 3: Contrappeso Contrappeso da 10kg (22lbs) Requisiti di sistema • Il CGX richiede corrente continua a 12 Volt con almeno 3 ampere di corrente. Celestron mette a disposizione un alimentatore c.a. a 12VDC 5A, includendo un - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 116
Ascensione retta Leva di blocco della frizione Contrappesi Barra di contrappeso Dado di arresto contrappeso Treppiede Fondina del controllo manuale Pulsantiera Vano accessori Supporto a coda di rondine AUX 3 e 4, e Autoguida (cfr. Figura 1.3). Interruttore On/Off (cfr. Figura 1.2). Porte Aux - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 117
Porta Autoguida Porta USB Scala delle latitudini AUX 3 e 4 AUX 1 e 2 Ingresso alimentazione Sistema di trasmissione a cinghia Figura 1.2 Panoramica Autoguida Autoguida Porta USB Figura 1.3 Panoramica ITALIANO | 5 - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 118
Disimballare tutti i contenuti e seguire la seguente procedura per assemblare la montatura. In caso di acquisto singolo del CGX, il kit include due contrappesi da 22 lb. Mentre, se il CGX è stato acquistato con un grande tubo ottico, saranno compresi più pesi per raggiungere l'equilibrio. Nota: La - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 119
nel supporto a coda di rondine della montatura. Fissare il telescopio in posizione con le due manopole di blocco (Figura 5). Il CGX si adatta all'ampia coda di rondine stile CGE Celestron e a code di rondine più piccole stile CG-5, comune anche per code di rondine Losmandy D1 e stile Vixen2. 1: Veri - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 120
al centro dell'oculare o fotocamera. Il sistema di allineamento polare di CGX si compone di un regolatore per l'altitudine ed uno per l'azimut (Figura leve di blocco e spostare il telescopio nella posizione desiderata. Celestron mette a disposizione un cannocchiale polare opzionale, che si attacca - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 121
, sarà necessario inserire longitudine, latitudine e fuso orario della propria posizione. 6. Una volta che la posizione è selezionata, impostare la data e l'ora. Il CGX-L ha un orologio in tempo reale (RTC) che memorizza la data, l'ora e le informazioni sulla posizione per il prossimo utilizzo della - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 122
di precisione L'allineamento polare totale Celestron consente l'allineamento polare di precisione della montatura senza l'utilizzo della Stella polare o cercatore polare. L'allineamento polare guidato dal software consente di scegliere la stella più adatta. Prerequisito: Il CGX in primo luogo deve - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 123
utilizzare a latitudini più alte (Figura 10,2). Porta USB sula Montatura Base di fissaggio a viti con esagono incassato La porta USB sul CGX-l viene utilizzata per l'interfaccia PC per l'utilizzo con l'apposito software di controllo telescopio. È sufficiente collegare uno cavo USB standard di tipo - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 124
Controllo manuale NexStar+ 1. Finestra del display a cristalli liquidi (LCD): Retroilluminazione rossa la velocità di tracciabilità, gli oggetti definiti dall'utente e altro. 7. Opzione (Logo Celestron): Funziona in modo simile al tasti SHIFT di una tastiera e può essere utilizzato in combinazione - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 125
verso l'oggetto, oppure tenere premuto il tasto OPZIONE (logo Celestron) e premere il tasto INFO OGGETTO per vedere le informazioni MOTOR SPEED (VELOCITÀ MOTORE), simile al tasto Rate (Velocità) del controllo manuale NexStar originale, consente di modificare istantaneamente la velocità dei motori da - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 126
Imposta lingua può anche apparire la prima volta che si utilizza il nuovo controllo manuale. È anche possibile avviarla in qualsiasi momento tenendo premuto il tasto Opzione (con il logo Celestron) per 10 secondi durante l'accensione del telescopio. Procedure di allineamento Affinché il telescopio - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 127
3. Una volta centrato, premere il tasto INDIETRO fino a quando non si arriva al menu principale. 4. Quando viene visualizzata la dicitura CGX Pronto , premere il tasto ALLINEARE sulla pulsantiera per selezionare le Stelle di allineamento dall'elenco delle opzioni. 5. Lo schermo chiederà quindi quale - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 128
desiderato sarà visualizzato sullo schermo del controllo manuale, vi sono due opzioni: • Premere il tenere premuto il tasto OPTION (logo Celestron) e premere il tasto OBJECT INFO colpire un osservatore nell'occhio. Tasto SkyTour La montatura CGX-L include una funzionalità tour la quale consente all' - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 129
collegamento rapido al Catalogo Messier. Tasto Menu La montatura CGX contiene molte funzioni di configurazione personalizzate ideate per essere in grado di spostare il telescopio con i tasti del controllo manuale, il telescopio traccerà continuamente un oggetto celeste durante il suo spostamento nel - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 130
premuto il tasto Opzione (con il logo Celestron) per 10 secondi durante l'accensione del funzionalità di compensazione contraccolpi di CGX-L consente all'utente di compensare ficata. Per invertire la logica di pulsante del controllo manuale, premere il tasto MENU e selezionare Tasti direzionali dal - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 131
- una volta calibrate le impostazioni della montatura (vedere la sezione Utilità qui di seguito) i valori sono salvati e visualizzati nel controllo manuale. Non si consiglia di modificare i valori di calibrazione. Tuttavia ciascuna impostazione può essere modificata se necessario per migliorare le - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 132
di almeno 6° dal limite di rotazione della A.R. impostato nel controllo manuale. Se ciò dovesse rivelarsi un problema, la direzione che il telescopio impostare gli assi di A.R. e Dec individualmente. La velocità massima della CGX-L è di 4°/ secondo (3°/secondo predefinito). Menu Utilità Scorrendo - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 133
del telescopio. Al momento dell'allineamento, il telescopio riceve ancora le informazioni dal RTC. Se si desidera utilizzare il database del controllo manuale per trovare le coordinate di un oggetto celeste per date passate o future, sarà necessario spegnere il RTC al fine di inserire manualmente - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 134
Identifica La modalità Identifica cercherà uno qualsiasi dei cataloghi o degli elenchi del database della montatura e visualizzerà il nome e le distanze offset degli oggetti corrispondenti più vicini. Questa funzione può essere utilizzata per due scopi. In primo luogo, può essere utilizzata per identi - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 135
Struttura menu principale CGX-L Menu Tracciatura Visualizza oraposizione Pulsantiera Configurazione telescopio Utilità Oggetti utente Ottieni R.A. - Dec VaiA R.A. Dec Identifica VaiA di precisione Modalità Nord EQ Sud EQ - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 136
Struttura menu principale CGX-L Configurazione telescopio Configurazione ora-posizione Anti-contraccolpo Limiti filtro Tasti direzionali Approccio VaiA Velocità guida automatica Meridiano Impostazioni montatura Limiti R.A. Velocità personalizzata 9 Posizione - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 137
al vostro pulsantiera. 3. Inserire la spina nel CGX-L e accenderlo. 4. Aprire la Gestione Firmware Celestron (CFM). 5. CFM controllerà l'hardware ed eseguir installato 2. Cavo Mini USB (non in dotazione) 3. Controllo manuale del telescopio NexStar+ incluso * Non è richiesta alcuna alimentazione - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 138
. Le istruzioni sull'utilizzo del software possono essere trovate anche nella pagina di supporto del prodotto di CGX-L. http://www.celestron.com/support/manuals-software/files/ CGX-L-control-software-download Promemoria: Il controllo software PWI si collega direttamente alla porta USB sulla montatura - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 139
- 16:00 PST NOTA: La presente garanzia è valida per i clienti di Stati Uniti e Canada che hanno acquistato questo prodotto da un rivenditore Celestron autorizzato negli Stati Uniti o in Canada. La garanzia al di fuori di Stati Uniti e Canada è valida esclusivamente per i clienti che hanno effettuato - Celestron CGX-L Equatorial Mount Without Tripod | CGX-L Mount - Page 140
INSTRUCTION MANUAL
Model #91531
EQUATORIAL MOUNT AND TRIPOD