Celestron CGX-L Equatorial Mount and Tripod CGX-L Manual 5 Languages
Celestron CGX-L Equatorial Mount and Tripod Manual
View all Celestron CGX-L Equatorial Mount and Tripod manuals
Add to My Manuals
Save this manual to your list of manuals |
Celestron CGX-L Equatorial Mount and Tripod manual content summary:
- Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 1
EQUATORIAL MOUNT AND TRIPOD INSTRUCTION MANUAL Model #91531 - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 2
TABLE OF CONTENTS Introduction 3 System Requirements 3 Parts List 3 Overview 4 Assembly 6 Polar Align the Mount 8 Basic Usage 8 Precise Polar Alignment 10 Motion Range in Mount 10 Adjusting the Mount for Very High or Low Latitudes 11 USB Port 11 AUX Ports 11 Autoguide Port 11 NexStar+ - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 3
Mount and Tripod was designed to support your telescope for both visual observation and astrophotography. When used correctly, the CGX-L serves as a steady platform, with accurate pointing and tracking for your telescope. Please review these instructions to familiarize yourself with the mount - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 4
Overview Dovetail Lock Knobs DEC Clutch Lock Lever Carry Handle R.A. Clutch Lock Lever Counterweights Counterweight Shaft Counterweight Stop Nut Tripod Hand Control Holster Hand Control Accessory Tray Dovetail Saddle AUX 3 and 4, and Autoglider See figure 1.3 On/Off Switch See figure 1.2 Aux 1 & - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 5
Autoguide Port USB Port Latitude Scale AUX 3 and 4 AUX 1 and 2 Power Input Belt Drive Windows Figure 1.2 Overview Autoguider Autoguider USB Port Figure 1.3 Overview ENGLISH | 5 - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 6
and Washer 3. Place the accessory tray over the central column so that each of the three arms of the tray is supporting a tripod leg. 4. Thread the nut and washer back onto the threaded column and firmly tighten into place. The accessory tray should not be able to - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 7
Roughly Polar Align the Mount Before more weight is added to the mount and tripod, roughly position the mount so that it's pointing north (or south if in the southern hemisphere), and set to your latitude. Loosen the two altitude lock knobs and turn the altitude adjustment knob (Figure 1.1) until - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 8
's internal switches will take the mount to its home position when you power it on (more on that in "Basic Usage"), but you can still manually position it before powering on the mount. Simply unlock the two lock levers, and move the telescope to the desired position. Polar Align the Mount - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 9
Home Position and Site Information 1. P lug the included NexStar+ Hand Control into one of the Aux ports. You can plug into any of Aux 1 to 4 ports. 2. P lug the power cable into the power input port on the mount. Be sure to secure the power cable with the threaded barrel connector. 3. T urn the - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 10
the mount or tripod. If for any reason the mount exceeds the software limit switch (or if the clutch is unlocked and the mount is manually moved), the mount will halt at the hard stop. R.A. limit (Figure 9.1) allows you to track 20º past the meridian. If you leave the mount unattended - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 11
Adjusting the Mount for Very High or Low Latitudes The EQ head can be set on the tripod in three different positions to optimize the center of balance over the tripod, or to provide more clearance when needed at lower latitudes. Additionally, the EQ head can be positioned so that the counterweight - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 12
the screen before use. 2. A lign: Instructs the telescope to begin the default alignment procedure. direction keys to center objects in the eyepiece or to manually slew your telescope. 4. Catalog Keys: Allow direct this button will offer troubleshooting tips. For your convenience, it currently functions as - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 13
in the database, see Allow Sun option in the Database Setup section of the manual. • Stars - The Stars catalog displays custom lists of all the brightest the speed rate of the motors from high speed slew rate to precise guiding rate or anywhere in between. Each rate corresponds to a number on the - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 14
align the selected star with the cross hairs in the center of the finderscope. When centered in the finder, press ENTER. The display will then instruct you to center the star in the field of view of the eyepiece. When the star is entered, press ALIGN to accept this star as - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 15
accuracy of your telescope without having to re-enter additional information. • If you have used the computer-assisted polar alignment method and have manually moved the mount, it may be necessary to re-align the mount for improved pointing accuracy. To replace an existing alignment star with - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 16
Object Catalog Selecting an Object Once the telescope is properly aligned, you can choose an object from any of the catalogs in the NexStar+ hand control's database. The hand control has a key designated for each category of objects in its database; Solar System objects, Stars and Deep Sky objects. - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 17
the type of mount being used to support the telescope. The telescope has three different the motors from high speed slew rate to precise guiding rate or anywhere in between. Each rate corresponds future firmware updates, this button will offer troubleshooting tips. For your convenience, it currently - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 18
appears to move in the eyepiece changes depending on which side of the Meridian the telescope tube is on. This can create confusion especially when guiding on a star when doing astroimaging. To compensate for this, the direction of the drive control keys can be changed. To reverse the button logic - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 19
target object is accessible from both sides of the mount, selecting "Favor East" instructs the mount to point to the object as if it were on the east mount and pointing east. • Disable - This is the default setting, which instructs the mount to always swing around to the other side of the pier as - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 20
slew limit set in the hand control. If this proves to be a problem, the direction that the telescope takes to center an object can be changed ENTER. 3. Power off the telescope. Remember to never move your telescope manually while in Hibernate mode. Once the telescope is powered on again, the - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 21
telescope's database to find the coordinates of a celestial object for a future or past dates, you will need to turn the GPS off in order to manually enter a time other than the present. Turn On/Off RTC - Allows you to turn off the telescope's internal real time clock. When aligning, the telescope - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 22
Identify Identify Mode will search any of the mount's database catalogs or lists and display the name and offset distances to the nearest matching objects. This feature can serve two purposes. First, it can be used to identify an unknown object in the field of view of your eyepiece. Additionally, - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 23
CGX-L Main Menu Tree Menu Tracking View Time-Site Hand Control Scope Setup Utilities User Objects Get RA-Dec GoTo RA Dec Identify Precise Goto Mode EQ North EQ South Off Rate Sidereal Solar Lunar Saved Site Lights Control Keypad Level Display Level Scrolling Menu Toggle Bold Font - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 24
CGX-L Main Menu Tree Scope Setup Setup Time-Site Anti-Backlash Filter Limits Direction Button GoTo Approach Autoguide Rates Meridian Mount Settings RA Limits Custom Rate 9 Custom Site City Database RA Positive RA Negative Dec Positive Dec Negative RA Button Dec Button RA Approach Dec Approach RA - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 25
Appendix A: Upgrading the Firmware in Your Mount and Hand Control Setup overview (Figure 12.1 and 12.2) To check for new firmware updates, refer to this URL: http://software.celestron.com/updates/CFM/CFM/ 1. Plug your NexStar+ hand control into the AUX1 or AUX2 port. 2. Plug a USB mini cable from - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 26
co-developed by PlaneWave Instruments. Please download the software from this link. Instructions on software usage can also be found from the CGX-L's product support page. http://www.celestron.com/support/manuals-software/files/ CGX-L-control-software-download Figure 13 Removing the gear cover 26 - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 27
style telescope. If warranty problems arise, or if you need assistance in using your telescope mount contact: Celestron Customer Service Department 2835 Columbia Street if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 28
- Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 29
MONTURE ÉQUATORIALE ET TRÉPIED MODE D'EMPLOI Modèle N°. 91531 - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 30
TABLE DES MATIÈRES Introduction 3 Configuration système requise 3 Liste des composants 3 Présentation générale 4 Montage 6 Alignement polaire de la monture 8 Utilisation de base 8 Alignement polaire précis 10 Plage de mouvement de la monture 10 Régler la monture pour les latitudes très - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 31
et suivi précis pour votre télescope. Lisez ces instructions avec soin pour vous familiariser avec la monture et bien Trépied CGX-L Trépied Plateau à accessoires Support du trépied (vissé sur la colonne centrale du trépied) Écrou et rondelle Support de commande à main Boîte 3: Contrepoids - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 32
Poignée de transport AD Levier de verrouillage du mouvement AD Contrepoids Barre de contrepoids Rondelle d'arrêt des contrepoids Trépied Support de commande à main Commande à main Plateau à accessoires Selle de queue d'aronde AUX 3 et 4, et Autoguider Voir Figure 1.3 Interrupteur d'alimentation [On - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 33
Port Autoguide Port USB Indicateur de latitude AUX 3 et 4 AUX 1 et 2 Port d'alimentation Fenêtres d'observation des courroies Figure 1.2 Présentation générale Autoguider Autoguider Port USB Figure 1.3 Présentation générale FRANÇAIS | 5 - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 34
ce que chacun soit complètement étendu. 2. Retirez l'écrou du support du trépied et la rondelle de la colonne centrale fixée sur le haut du tré la colonne centrale de manière à ce que les trois bras du plateau supportent chacun un pied du trépied. Figure 2.2 Positionnement du trépied 4. - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 35
Alignement polaire grossier de la monture Avant d'ajouter des poids sur le trépied et la monture, positionnez la monture de manière à ce qu'elle pointe généralement vers le nord (ou le sud si vous résidez dans l'hémisphère sud), et réglez votre latitude. Desserrez les deux molettes de verrouillage - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 36
de la commande à main Enroulez la sangle à crochet et boucle autour du pied du trépied puis placez la commande à main dans le support. Brancher la commande à main Branchez la commande à main NexStar+ dans l'un des ports Aux. Avertissement: Ne pas brancher la commande à main dans le port Autoguide - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 37
Position d'origine et informations de site 1. B ranchez la commande à main NexStar+ dans l'un des ports Aux. Vous pouvez la brancher dans n'importe lequel des ports Aux 1 à 4. 2. B ranchez le câble d'alimentation dans le port d'alimentation de la monture. Veillez à fixer solidement le câble d' - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 38
Alignement polaire précis La fonction All-Star Polar Alignement de Celestron vous permet d'effectuer un alignement polaire précis sans utiliser Polaris ni un viseur polaire. Cette méthode d'alignement polaire assistée par logiciel vous permet de sélectionner une étoile facile à observer. Conditions - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 39
Régler la monture pour les latitudes très hautes ou très basses La tête EQ peut être installée sur le trépied selon trois positions différentes pour optimiser le centre d'équilibre sur le trépied, ou pour disposer de plus de champ lors de l'observation à basses latitudes. De plus, la tête EQ peut ê - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 40
de manière répétée pour revenir au menu principal ou pour effacer des données saisies par erreur. 10. Sky Tour: Active le mode tour guidé, lequel recherche tous les meilleurs objets célestes et oriente automatiquement votre télescope vers ces objets. 11. Boutons de défilement: Utilisé pour défiler - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 41
Sélection d'un objet Dès que le télescope est aligné correctement, vous pouvez sélectionner un objet dans n'importe quel catalogue de la base de données de commande à main NexStar+. La commande à main comporte une touche dédiée à chaque catégorie d'objets contenus dans sa base de données Système - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 42
Menu du contrôle manuel Le menu « Contrôle manuel » vous permet de personnaliser certaines caractéristiques du contrôle manuel NexStar+. Pour accéder à ce menu, appuyez sur le bouton MENU (#7 sur le pavé numérique) et utilisez les boutons de défilement pour sélectionner « Contrôle manuel » puis - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 43
Astuces pour l'ajout d'étoiles de calibration: • Bien que pour l'observation de divertissement, les étoiles de calibration supplémentaires ne soient pas nécessaires, il est recommandé d'en ajouter autant que possible pour obtenir une précision de pointage optimale. • Les étoiles de calibrations - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 44
. La visite automatique affichera seulement les objets contenus dans le catalogue et selon les limites du filtre personnalisé. Pour activer la fonction de visite guidée, appuyez sur SKY TOUR sur le bloc de commande. 1. Appuyez sur le bouton SKY TOUR de la commande à main. 2. Utilisez les boutons de - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 45
-dessous. Menu Suivi Mode Suivi - cela permet de choisir la manière dont le télescope suit un objet selon le type de monture utilisée pour supporter le télescope. Le produit possède trois différents • EQ Nord - Pour suivre le ciel lorsque le télescope est aligné dans l'hémisphère nord. • EQ - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 46
-dessus de l'horizon. En conséquence, lors du défilement à travers les listes de base de données (ou en sélectionnant la fonction Visite Guidée), la commande à main affichera seulement les objets qui se trouvent au-dessus de l'horizon au moment de l'observation. Vous pouvez personnaliser la base de - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 47
Pour modifier la direction d'approche GoTo, simplement sélectionner GoTo Approach du menu Scope Setup, sélectionner soit l'approche Altitude soit l'approche Azimut, choisir positif ou négatif et appuyer sur Entrée. ASTUCE : Pour minimiser les effets négatifs du rebond d'engrenage sur la précision de - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 48
AVERTISSEMENT: Pour permettre au télescope de se déplacer vers une étoile depuis la direction qui limite la quantité de rebond dans les engrenages, il pourrait être nécessaire de faire en sorte que le télescope s'oriente plus loin que les limites d'orientation saisie pour approcher l'étoile depuis - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 49
objet dans la base de données. Enregistrer dans Base de données (Db) • Objet: Cette fonction vous permet de créer votre propre visite guidée d'objets de base de données en vous permettant d'enregistrer la position courante du télescope et d'enregistrer le nom de l'objet en sélectionnant un des - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 50
Identifier Le mode Identification recherchera dans les listes ou catalogues de la base de données de la monture et affichera le nom et distances décalées des objets correspondants le plus proches. Cette fonction peut être utile dans deux cas. Tout d'abord, elle peut permettre d'identifier un objet - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 51
Arborescence du menu principal CGX-L MENU Suivi Économie d'énergie EQ Nord EQ Sud Désactivé Taux Sidérale Solaire Lunaire Afficher heure-site Commande à main Site enregistré Éclairage des boutons Éclairage du clavier Éclairage de l'affichage Menu de Défilement Activer les caractères - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 52
Arborescence du menu principal CGX-L Réglage du Télescope Configurer heure-site Site personnalisé Utilitaires Base de données de villes Anti-rebond AD positive AD négative DEC positive DEC négative Limites de filtre Touches de direction Bouton AD Bouton DEC Approche aller à Approche AD - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 53
Annexe A: Mettre à jour le logiciel interne de votre monture et de votre commande à main Présentation générale de la configuration (Figure 12.1 et 12.2) Pour savoir si une nouvelle mise à jour est disponible, consultez cette URL: http://software.celestron.com/updates/CFM/CFM/ 1. Branchez la - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 54
PWI, qui a été co-développé par PlaneWave Instruments. Téléchargez le logiciel depuis ce lien. Vous pourrez trouver les instructions d'utilisation du logiciel sur la page de produit de la CGX-L. http://www.celestron.com/support/manuals-software/files/ CGX-L-control-software-download 26 | FRANÇAIS - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 55
ayant été l'objet d'un remplacement deviendront la propriété de Celestron. Celestron Service à la clientèle 2835 Columbia Street Torrance, CA 90503 Tel. 800 , s'il n'est pas installé et utilisé conformément aux instructions du manuel, peut causer des interférences nuisibles aux communications radio. - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 56
- Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 57
PARALLAKTISCHE MONTIERUNG UND STATIV BEDIENUNGSANLEITUNG Modellnr. 91531 - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 58
INHALTSVERZEICHNIS Einführung 3 Systemvoraussetzungen 3 Teileliste 3 Übersicht 4 Zusammenbau 6 Polar Ausrichtung der Montierung 8 Grundlegende Bedienung 8 Präzise Polausrichtung 10 Bewegungsbereich der Montierung 10 Die Montierung auf sehr hohe bzw. niedrige Breitengrade einstellen 11 USB- - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 59
Einleitung Teileliste Die CGX-L deutsche parallaktische Montierung und Stativ wurde entwickelt, um Sie mit Ihrem Teleskop sowohl bei der visuellen Beobachtung und Astrofotografie zu unterstützen. Bei sachgemäßer Verwendung dient das CGX-L als stetige Plattform mit präzisem Zeige- und Nachfü - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 60
Übersicht SchwalbenschwanzArretierungen DEK-Kupplungsfeststellhebel Tragegriff R.A. Kupplungsfeststellhebel Gegengewichte Gegengewichtsschaft GegengewichtAnschlagmutter Stativ Tasche für die Handsteuerung Handsteuerung Zubehörablage Schwalbenschwanzsattel AUX 3 und 4 und Autoglider Siehe Abbildung - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 61
Autoguide-Anschluss USB-Port Breitenskalen AUX 3 und 4 AUX 1 und 2 Stromeingangsleistung Riementriebfenster Abb. 1.2 Übersicht Autoguider Autoguider USB-Anschluss Abb. 1.3 Übersicht DEUTSCH | 5 - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 62
Zusammenbau Packen Sie den ganzen Inhalt aus und befolgen die einzelnen Schritte, um Ihre Montierung zusammenzubauen. Wenn Sie nur das CGX-L gekauft haben, enthält das Set ein Gegengewicht von 22lbs. Wenn Sie den CGX-L mit einem großen optischen Tubus erworben haben, können weitere Gewichte dabei - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 63
Grobe Polausrichtung der Montierung Richten Sie die Montierung grob nach Norden (in der südlichen Hemisphäre nach Süden) aus und stellen Sie Ihre geografischen Breite ein, bevor Sie Montierung und Stativ mit zusätzlichen Gewichten versehen. Lösen Sie die beiden Höhenverriegelungsknöpfe und drehen - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 64
Anbringen der Handsteuerungshalterung Wickeln Sie den Klettverschluss und die Tasche um das Stativbein und stecken Sie die Handsteuerung in die Tasche. Handsteuerung anschließen Schließen Sie die mitgelieferte NexStar + Handsteuerung an einen der Aux-Anschlüsse an. Polausrichtung der Montierung Das - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 65
Ausgangsposition und Standortdaten 1. Schließen Sie das mitgelieferte NexStar + die Handsteuerung an einen der Aux-Anschluss an. Sie können einen beliebigen Aux 1 bis 4 Anschluss verwenden. 2. Schließen Sie das Stromkabel an den Netzanschluss der Montierung an. Achten Sie darauf, das Netzkabel mit - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 66
Präzise Polausrichtung Die All-Star Polar Ausrichtung von Celestron ermöglicht es Ihnen, Ihre Montierung präzise polar auszurichten, ohne Polaris oder einen Polsucher zu verwenden. Diese Softwareunterstützte Poljustierung ermöglicht Ihnen die Auswahl eines geeigneten Sterns. Voraussetzung: Die CGX - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 67
Die Montierung auf sehr hohe oder nied- rige Breitengrade einstellen Der EQ-Kopf kann auf dem Stativ auf drei verschiedenen Positionen eingestellt werden, um das Gleichgewichts über dem Stativ zu optimieren oder um mehr Freiheit zu schaffen, die in niedrigeren Breitengraden benötigt wird. Zusätzlich - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 68
NexStar+ Handsteuerung 1. L CD-Anzeigefenster (Flüssigkristallanzeige): Eine rote Hintergrundbeleuchtung zum bequemen Betrachten der Teleskopinformationen und zum Scrollen von Text bei Nacht. Entfernen Sie vor Gebrauch den Schutzfilm auf dem Bildschirm. 2. A usrichtung (Align): Startet die - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 69
Auswahl eines Objekts Nun da das Teleskop richtig ausgerichtet ist, können Sie ein Objekt aus einem der Kataloge in der NexStar+ Datenbank der Handsteuerung auswählen. Die Handsteuerung verfügt über eine Taste, die jeder Objekt-Kategorie in der Datenbank zugewiesen wurde: Objekte im Sonnensystem, - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 70
Das Handsteuerungsmenü Das Menü „Handsteuerung" ermöglicht Ihnen die Anpassung bestimmter Funktionen der NexStar+-Handsteuerung. Um auf dieses Menü zuzugreifen, drücken Sie die Taste MENU (Nr. 7 auf dem Tastenfeld) und wählen mit den Navigationstasten die Option "Handbedienung" und drücken ENTER. - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 71
Tipps zum Hinzufügen von Kalibrierungssternen: • O bwohl es für die zufällige Beobachtung keine Kalibrierungssterne notwendig sind, wird empfohlen, dass Sie mindestens drei Kalibrierungssterne für die optimale Ausrichtungsgenauigkeit hinzufügen. • D ie Auswahl von Kalibrierungssternen, die sich in - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 72
Objektkatalog Auswahl eines Objekts Nun da das Teleskop richtig ausgerichtet ist, können Sie ein Objekt aus einem der Kataloge in der NexStar+ Datenbank der Handsteuerung auswählen. Die Handsteuerung verfügt über eine Taste, die jeder Objekt-Kategorie in der Datenbank zugewiesen wurde: Objekte im - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 73
Richtungstasten In der Mitte der Handsteuerung befinden sich vier Richtungstasten, die die Höhen- (auf und ab) und Azimut- (links und rechts) Bewegung des Teleskops steuern. Das Teleskop kann mit neun verschiedenen Geschwindigkeitsraten gesteuert werden. Menü-Taste Die CGX-Montierung enthält viele - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 74
Verwenden Sie die Scroll-Tasten, um eine der folgenden Optionen auszuwählen: • Beleuchtungskontrolle: Die Helligkeit der Zahlentastatur und des LCDs wird unabhängig voneinander geregelt. • S croll-Menü: Hiermit wird die Geschwindigkeit, mit der Worte über das LCD laufen, angepasst. • F ettdruck ä - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 75
HINWEIS: Um den Einfluss des Getriebespiels bei der Zeigegenauigkeit zu minimieren, sollten die Einstellungen für die Richtungstasten mit denen der GoTo-Automatik übereinstimmen. Standardmäßig werden die Richtungstasten Aufwärts und Rechts für das Zentrieren der Ausrichtungssterne verwendet, was - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 76
Ihre Möglichkeiten, weiter als 6 ° über dem in der Handsteuerung eingestellten RA-Schwenkgrenzwert auf ein Objekt zu schwenken, begrenzt. Wenn dies ein Problem darstellt, kann die Richtung, in der das Teleskop ein Objekt zentriert, geändert werden. Zum Ändern der Schwenkrichtung des Teleskops, siehe - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 77
Einstellen der Montierungsposition Das Menü zum Einstellen der Montierungsposition kann verwendet werden, um Ihre Ausrichtung beim Auskuppeln oder ähnlichen Umständen zu erhalten. Sie könnten diese Funktion beispielsweise nutzen, wenn die Montierung nach einer vollständigen Ausrichtung neu - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 78
Identifizieren Der Identifizierungsmodus durchsucht einen beliebigen Datenbankkatalog der Montierung bzw. Name und OffsetDistanzen des nächsten passenden Objekts werden aufgelistet und angezeigt. Diese Funktion kann zwei Zwecke erfüllen: Erstens kann sie zur Identifikation eines unbekannten Objekts - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 79
CGX Hauptmenübaum Menü Nachführung Modus EQ Nord EQ Süd Aus Rate Siderisch Solar Lunar Uhrzeit-/Standort-Anzeige Gespeicherter Standort Handsteuerung Beleuchtungskontrolle: Tastaturstufe Anzeigeebene Scroll-Menü Fettdruck ändern: Kontrast einstellen: Sprache einstellen: Teleskops - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 80
CGX Hauptmenübaum Teleskops Aufbau Einrichtzeit am Standort Getriebespielnachstellung Filtergrenzen Richtungstasten Gehe zu Annäherung: Nachführungrate Meridian Einstellungen der Montierung RA Grenzwerte Benutzerdefinierte Rate 9: Benutzerdefinierter Standort Stadt Datenbank RA Positiv RA - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 81
Anhang A: Firmware-Upgrade der Montierung und Handsteuerung Setup-Übersicht (Abbildung 12.1 und 12.2) Zur Überprüfung von Firmware-Updates siehe bitte diese URL:http://software.celestron.com/updates/CFM/CFM/ 1. Stecken Sie den NexStar + Handschalter in die AUX1 oder AUX2-Anschluss 2. S tecken Sie - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 82
. Laden Sie bitte die Software unter diesem Link herunter. Anweisungen zur Softwareverwendung finden Sie auch auf der Produktsupportseite des CGX-L. http://www.celestron.com/support/manuals-software/files/ CGX-L-control-software-download Abbildung 13 Entfernen der Getriebeabdeckung 26 | DEUTSCH - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 83
Zur Erinnerung: Die PWI-Steuerungssoftware verbindet sich direkt mit dem USB-Anschluss der Montierung, anstatt mit dem Mini-USB-Anschluss an der Handsteuerung. Der MiniUSB-Anschluss der Handsteuerung wird für Firmware-Updates verwendet oder wenn Sie den CGX-L mit Ihrer eigenen mit ASCOM gelieferten - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 84
- Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 85
SOPORTE ECUATORIAL Y TRÍPODE MANUAL DE INSTRUCCIONES Modelo #91531 - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 86
de movimiento del soporte 10 Ajuste del soporte para latitudes muy altas o bajas 11 Puerto USB 11 Puertos AUX 11 Puerto Autoguide 11 Mando manual NexStar 12 Catálogo de objetos 16 Desplazarse a un objeto 16 Árbol del menú principal CGX 23 Apéndice A: Actualización del firmware del soporte - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 87
Trípode CGX-L Trípode Bandeja de accesorios Soporte del trípode (enroscado en la columna central del trípode) Rosca y arandela Funda del mando manual Caja 3: Contrapeso Contrapeso de 10 kg (22 lbs) Requisitos del sistema • El CGX-L precisa de 12 voltios de alimentación CC con al menos 3 amperios - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 88
Soporte del machihembrado AUX 3 y 4, y Autoglider Consulte la figura 1.3 Interruptor de encendido/apagado Consulte la figura 1.2 Puertos Aux 1 y Aux 2 para el mando manual y los accesorios Entrada de alimentación Mandos de bloqueo de altitud (uno en cada lado) Mando de ajuste de altitud Mandos de - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 89
Puerto Autoguide Puerto USB Escalas de latitud AUX 3 y 4 AUX 1 y 2 Entrada de alimentación Ventanas del impulsor de correa Figura 1.2 Vista general Autoguider Autoguider Puerto USB Figura 1.3 Vista general ESPAÑOL | 5 - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 90
Montaje Desembale el contenido y siga estos pasos para montar el soporte. Si ha adquirido el CGX-L solamente, el trípode incluirá un contrapeso de 22 lbs (10 kg). Si ha adquirido el CGX-L con un tubo óptico grande, pueden incluirse más contrapesos para lograr el equilibrio. Nota: La llave allen de - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 91
La escala solamente está pensada para alineación polar aproximada. Puede obtener una alineación polar más precisa más tarde con ayuda del mando manual informatizado. Mandos de bloqueo de machihembrado Añadir los contrapesos Retire la rosca de retención del extremo del eje de contrapeso, añada los - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 92
Enrolle la correa con gancho y la funda alrededor de la pata del trípode y coloque el mando manual en la funda. Conexión del mando manual Conecte el mando manual NexStar+ incluido a uno de los puertos Aux. Alineación polar del soporte El navegador informatizado puede localizar objetos aunque el - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 93
número de catálogo popular (como M42 para Messier 42). El 6 y 9 del teclado (arriba y abajo) permiten moverse por cualquier lista del mando manual. Pulse INTRO para ir al objeto seleccionado dela lista. Ejemplo de selección y desplazamiento al objeto de espacio profundo Messier M42. • Pulse ESPACIO - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 94
se desplazará hasta la posición en la que se encontraría la estrella si tuviera una alineación polar precisa. En este punto, no utilice el control manual para centrar la estrella. 5. Use los ajustes de altitud y azimut del soporte para colocar la estrella en el centro del ocular. 6. Pulse el bot - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 95
Puertos Autoguide POSICIÓN POSTERIOR El puerto Autoguide solamente debe usarse para relés de cámara con autoguide. PRECAUCIÓN: No conecte nunca el mando manual NexStar+ ni otros accesorios al puerto Autoguide. Podría causar daños. El CGX-L está equipado con un puerto Autoguide redundante, situado - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 96
están en ángulo para localizarlos más fácilmente sin mirar. 14 Figura 11,2 12. Velocidad del motor: Similar al botón Velocidad del mando manual NexStar original, le permite cambiar la velocidad del motor cuando se pulsan las teclas de dirección. 13. Información de objeto: Muestra coordenadas - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 97
el telescopio esté correctamente alineado, puede elegir un objeto de cualquiera de los catálogos de la base de datos del mando manual NexStar+. El mando manual tiene una tecla designada para cada categoría de objetos de su base de datos; objetos del sistema solar, estrellas y objetos del espacio - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 98
Cambia el idioma mostrado en el LCD. NOTA: La función Establecer idioma también puede aparecer la primera vez que use su nuevo mando manual. También puede iniciarlo en cualquier momento manteniendo pulsado el botón Opción (el logo Celestron) durante 10 segundos mientras el telescopio esté encendido - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 99
, pulse el botón ANTERIOR hasta que esté en el menú principal. 4. Cuando se muestre CGX preparado, pulse la tecla ALINEAR en el mando manual para seleccionar estrellas de alineación de la lista de opciones. 5. La pantalla le solicitará la estrella de alineación que desea remplazar. Use las teclas - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 100
el telescopio esté correctamente alineado, puede elegir un objeto de cualquiera de los catálogos de la base de datos del mando manual NexStar+. El mando manual tiene una tecla designada para cada categoría de objetos de su base de datos; objetos del sistema solar, estrellas y objetos del espacio - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 101
seguimiento de forma que el telescopio no se mueva. Velocidad de seguimiento - Además de poder mover el telescopio con los botones del mando manual, su telescopio seguirá continuamente un objeto celeste a medida que se mueve por el cielo nocturno. La velocidad de seguimiento puede cambiar según el - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 102
osa en la que el horizonte esté parcialmente oculto, puede establecer el límite mínimo de altitud en +20º. Esto garantizará que el mando manual solamente muestre objetos con una altitud superior a 20º. RECOMENDACIÓN: Si desea explorar toda la base de datos de objetos, establezca el límite de altitud - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 103
se haya calibrado la configuración del soporte (consulte la sección Utilidades a continuación) los valores se guardan y se muestran en el mando manual. No se recomienda cambiar los valores de calibración. Sin embargo, cada configuración puede cambiarse si es necesario para mejorar el rendimiento del - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 104
ón de índice usada al alinear el soporte. Para establecer la posición de inicio de su soporte, use los botones de flecha del mando manual para mover el soporte del telescopio a la posición deseada. Seleccione la opción Establecer y pulse Enter. Seleccione la opción IrA para devolver el telescopio - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 105
interno del telescopio. Al alinear, el telescopio seguirá recibiendo información de tiempo del RTC. Si desea usar la base de datos del mando manual para localizar las coordenadas de un objeto celeste para una fecha futura o pasada, deberá apagar el RTC para introducir manualmente una hora distinta - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 106
la estrella Vega como la estrella que está viendo. Sin embargo, seleccionando Identificar y buscando en los catálogos Objetos con nombre o Messier, el mando manual le hará saber que la Nebulosa del Anillo (M57) está a aproximadamente 6º de su posición actual. Buscar en el catálogo Estrellas dobles - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 107
Árbol del menú CGX-L Menú Seguimiento Uhrzeit-/Standort-Anzeige Mando manual Configuración del telescopio Utilidades Objetos del usuario Obtener RA-Dec IrA RA Dec Identificar IrA preciso Modo EQ Norte EQ Sur Apagado Velocidad Sideral Solar - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 108
Árbol del menú principal CGX-L Configuración del telescopio Configurar hora-lugar Compensación de retroceso Límites de filtro Botones de dirección Acercamiento IrA Velocidades de autoguía Meridiano Configuración de soporte Límites RA Velocidad personalizada 9 Localización personalizada Base de - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 109
NexStar+ en el puerto AUX1 o AUX2. 2. Conecte un cable mini USB de su PC para el mando manual. 3. Conecte la alimentación al CGX-L y enciéndalo. 4. Abra el Gestor de firmware Celestron (CFM). 5. C FM comprobará el hardware y buscará actualizaciones. CFM determinará automáticamente los - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 110
de este vínculo. Las instrucciones de uso del software también pueden encontrarse en la página de soporte de producto del CGX-L. http://www.celestron.com/support/manuals-software/files/ CGX-L-control-software-download 26 | ESPAÑOL Figura 13 Retirar la tapa del engranaje - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 111
: El software de control PWI conecta directamente con el puerto USB del soporte, en lugar del puerto mini USB del mando manual. El puerto mini USB del mando manual se usa para actualizaciones de firmware o si desea controlar el CGX-L con su propio software que use ASCOM. GARANTÍA LIMITADA POR - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 112
- Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 113
MONTATURA ALTAZIMUTALE E TREPPIEDE MANUALE D'USO Modello n. 91531 - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 114
INDICE Introduzione 3 Requisiti di sistema 3 Elenco componenti 3 Panoramica 4 Assemblaggio 6 Allineamento polare della montatura 8 Funzioni di base 8 Allineamento polare di precisione 10 Raggio di movimento sulla montatura 10 Regolazione della montatura per latitudini molto alte o basse 11 - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 115
montatura) Barra di contrappeso e dado di fermo 3 Viti a brugola esagonale da 8mm (attaccature testa per treppiede) Cavo di alimentazione 12VDC Controllo manuale NexStar+ Avvertenza • Non guardare mai direttamente il Sole a occhio nudo o con un telescopio (a meno che non si disponga del corretto - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 116
Ascensione retta Leva di blocco della frizione Contrappesi Barra di contrappeso Dado di arresto contrappeso Treppiede Fondina del controllo manuale Pulsantiera Vano accessori Supporto a coda di rondine AUX 3 e 4, e Autoguida (cfr. Figura 1.3). Interruttore On/Off (cfr. Figura 1.2). Porte Aux - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 117
Porta Autoguida Porta USB Scala delle latitudini AUX 3 e 4 AUX 1 e 2 Ingresso alimentazione Sistema di trasmissione a cinghia Figura 1.2 Panoramica Autoguida Autoguida Porta USB Figura 1.3 Panoramica ITALIANO | 5 - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 118
Assemblaggio Disimballare tutti i contenuti e seguire la seguente procedura per assemblare la montatura. In caso di acquisto singolo del CGX, il kit include due contrappesi da 22 lb. Mentre, se il CGX è stato acquistato con un grande tubo ottico, saranno compresi più pesi per raggiungere l' - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 119
Allineamento polare parziale della montatura Prima di caricare ulteriormente la montatura ed il treppiede, posizionare il supporto più o meno verso nord (o sud se nell'emisfero australe), e impostare la latitudine. Allentare le due manopole di blocco altitudine e ruotare la manopola di regolazione - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 120
Fissaggio della custodia per pulsantiera Allineamento polare della Avvolgere il cinturino a strappo e la custodia attorno alla gamba del treppiede e posizionarvi la pulsantiera al suo interno. Collegamento pulsantiera Collegare la pulsantiera NexStar in dotazione ad una delle porte Aux. Avvertenza - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 121
Posizione iniziale e Informazioni sul sito 1. C ollegare la pulsantiera NexStar+ in dotazione ad una delle porte Aux. Si può inserire in una qualsiasi delle porte Aux 1 - 4. 2. C ollegare il cavo di alimentazione alla porta di tensione di alimentazione sulla montatura. Assicurarsi di fissare il - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 122
Allineamento polare di precisione L'allineamento polare totale Celestron consente l'allineamento polare di precisione della montatura senza l'utilizzo della Stella polare o cercatore polare. L'allineamento polare guidato dal software consente di scegliere la stella più adatta. Prerequisito: Il CGX - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 123
Regolazione della montatura per latitudini molto alte o basse La testa EQ può essere impostata sul treppiede in tre diverse posizioni per ottimizzare il centro di equilibrio sopra il treppiede, o per fornire più spazio quando necessario a latitudini più basse. Inoltre, la testa EQ può essere - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 124
Controllo manuale NexStar+ 1. F inestra del display a cristalli liquidi (LCD): Retroilluminazione rossa per una comoda visualizzazione notturna delle informazioni relative al telescopio e per il testo a scorrimento. Rimuovere il - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 125
consentire che il Sole sia visualizzato come opzione nel database, vedere l'opzione Consenti Sole nella sezione di Configurazione del database nel manuale. • Stelle - Il catalogo delle stelle visualizza un elenco personalizzato di tutte le stelle, le stelle doppie (binarie), le stelle variabili, le - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 126
la lingua visualizzata sullo schermo LCD. NOTA: La funzioni Imposta lingua può anche apparire la prima volta che si utilizza il nuovo controllo manuale. È anche possibile avviarla in qualsiasi momento tenendo premuto il tasto Opzione (con il logo Celestron) per 10 secondi durante l'accensione del - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 127
Suggerimenti per l'aggiunta delle stelle di calibrazione: • Sebbene per l'osservazione causale non sia necessario aggiungere stelle di calibrazione, si consiglia di aggiungere almeno tre stelle di calibrazione per una precisione di puntamento ottimale. • La scelta di stelle di calibrazione che - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 128
catalogo più rapidamente nella relativa direzione. Rotazione su un oggetto Una volta che l'oggetto desiderato sarà visualizzato sullo schermo del controllo manuale, vi sono due opzioni: • Premere il tasto OBJECT INFO (INFO OGGETTO). Ciò fornirà informazioni utili in merito all'oggetto selezionato - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 129
modo che il telescopio non si muova. Velocità di tracciatura - oltre a essere in grado di spostare il telescopio con i tasti del controllo manuale, il telescopio traccerà continuamente un oggetto celeste durante il suo spostamento nel cielo notturno. La velocità di tracciatura può essere modificata - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 130
questo problema, la direzione dei tasti del controllo di guida può essere modificata. Per invertire la logica di pulsante del controllo manuale, premere il tasto MENU e selezionare Tasti direzionali dal menu Utilità. Utilizzare i tasti freccia Su e Giù (10) per selezionare sia i tasti dell - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 131
- una volta calibrate le impostazioni della montatura (vedere la sezione Utilità qui di seguito) i valori sono salvati e visualizzati nel controllo manuale. Non si consiglia di modificare i valori di calibrazione. Tuttavia ciascuna impostazione può essere modificata se necessario per migliorare le - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 132
oggetto di almeno 6° dal limite di rotazione della A.R. impostato nel controllo manuale. Se ciò dovesse rivelarsi un problema, la direzione che il telescopio segue l'utente può esplorare molte altre funzione del controllo manuale senza svegliare il telescopio dalla modalità ibernazione. Per - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 133
del telescopio. Al momento dell'allineamento, il telescopio riceve ancora le informazioni dal RTC. Se si desidera utilizzare il database del controllo manuale per trovare le coordinate di un oggetto celeste per date passate o future, sarà necessario spegnere il RTC al fine di inserire manualmente - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 134
Identifica La modalità Identifica cercherà uno qualsiasi dei cataloghi o degli elenchi del database della montatura e visualizzerà il nome e le distanze offset degli oggetti corrispondenti più vicini. Questa funzione può essere utilizzata per due scopi. In primo luogo, può essere utilizzata per - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 135
Struttura menu principale CGX-L Menu Tracciatura Visualizza oraposizione Pulsantiera Configurazione telescopio Utilità Oggetti utente Ottieni R.A. - Dec VaiA R.A. Dec Identifica VaiA di precisione Modalità Nord EQ Sud EQ Off Velocità Siderale Solare Lunare Posizione salvata Controllo - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 136
Struttura menu principale CGX-L Configurazione telescopio Configurazione ora-posizione Anti-contraccolpo Limiti filtro Tasti direzionali Approccio VaiA Velocità guida automatica Meridiano Impostazioni montatura Limiti R.A. Velocità personalizzata 9 Posizione personalizzata Database città R.A. - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 137
Aggiornamento Firmware per pulsantiera Cavo Mini USB fornito dall'utente Pulsantiera NexStar+ Elementi necessari: 1. PC con CFM installato 2. Cavo Mini USB (non in dotazione) 3. Controllo manuale del telescopio NexStar+ incluso * Non è richiesta alcuna alimentazione supplementare! ITALIANO | 25 - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 138
da questo link. Le istruzioni sull'utilizzo del software possono essere trovate anche nella pagina di supporto del prodotto di CGX-L. http://www.celestron.com/support/manuals-software/files/ CGX-L-control-software-download 26 | ITALIANO - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 139
Promemoria: Il controllo software PWI si collega direttamente alla porta USB sulla montatura, anziché alla porta mini USB della pulsantiera. La mini porta USB sulla pulsantiera viene utilizzata per gli aggiornamenti del firmware o se si desidera controllare la CGX-L con il proprio software in - Celestron CGX-L Equatorial Mount and Tripod | CGX-L Manual 5 Languages - Page 140
INSTRUCTION MANUAL
Model #91531
EQUATORIAL MOUNT AND TRIPOD