Celestron Celestron Labs CM800 Compound Microscope Celestron Labs CM800 Manual

Celestron Celestron Labs CM800 Compound Microscope Manual

Get Celestron Celestron Labs CM800 Compound Microscope PDF manuals and user guides View all Celestron Celestron Labs CM800 Compound Microscope manuals
Add to My Manuals
Save this manual to your list of manuals

Celestron Celestron Labs CM800 Compound Microscope manual content summary:

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
English
Congratulations on your Celestron Labs
microscope purchase. Your new Celestron
Labs microscope is a precision optical
instrument, made of the highest quality
materials to ensure durability and long
life. It is designed to give you a lifetime of
enjoyment with minimal maintenance.
This CL-CM800 microscope provides powers
from 40x up to 800x. It is ideally suited for
examining specimen slides of yeasts and
molds, cultures, plant and animal parts,
fibers, bacteria, and more.
Before attempting to use your Celestron
Labs microscope, please read these
instructions to familiarize yourself with
the parts and functions of the microscope.
Refer to the microscope diagrams to locate
the parts discussed in the manual. The final
section of the manual provides simple care
and maintenance tips.
IN THE BOX
- Microscope CL-CM800
- 2 wide field eyepieces: 10x, 20x
- AC adapter
- 10 prepared slides
- 3 AA batteries
PARTS
1.
Eyepiece
2.
Eyepiece Tube
3.
Nosepiece
4.
Objective Lens
5.
Stage Clip
6.
Stage
7.
Illuminator
8.
Base
9.
Head
10.
Arm
11.
Focus Knob
12.
Disc Diaphragm
13.
Power Switch
14.
Illuminator Adjustment
SPECIFICATIONS
STAGE
: Plain Stage with clips –
3.5 in x 3.5 in (88 mm x 88 mm)
HEAD:
Monocular with 45° incline
MAGNIFICATION
RANGE:
40x to 800x
FOCUSER:
Coarse focus
OBJECTIVES:
4x, 10x, 40x
EYEPIECES
: WF 10x, WF 20x
NOSEPIECE
: Triple with click stop
ILLUMINATOR
: LED, adjustable
CONDENSER
: N.A. 0.65
DIAPHRAGM
: Disc diaphragm with 6
aperture sizes
DIMENSIONS
: 5.0 in x 6.0 in x 11.0 in
(127 mm x 152 mm x 279 mm)
WEIGHT
: 2.7 lbs (1.108 kg)
MAGNIFICATION TABLE
Use the following table to determine
magnification using your microscope’s
different eyepiece/objective lens
combinations.
OBJECTIVE LENS:
4x
10x
40x
WF 10X EYEPIECE:
40x
100x
400x
WF 20X EYEPIECE:
80x
200x
800x
SETTING UP YOUR
MICROSCOPE
1.
Remove the Styrofoam container from
the carton.
2.
Carefully remove the microscope and
accessories from container and set them
on a table, desk, or other flat surface.
3.
Remove bag covering from microscope.
4.
Remove cap from eyepiece tube (2).
5.
Remove the eyepieces from plastic bags.
6.
Insert the WF 10x eyepiece into the
eyepiece tube (2)
7.
Plug the AC adapter into the socket on
the back of the base (8).
8.
Insert the plug end of the AC adapter into
the proper power source.
Additionally the microscope can be powered
with three AA batteries.
- Open the battery compartment on the
base (8) of the microscope.
- Install the three AA batteries (supplied)
and close the battery compartment.
MICROSCOPE OPERATION
Before viewing specimens, please read
these sections thoroughly regarding
focusing, changing power (magnification),
using the stage and adjusting illumination.
VIEWING A SPECIMEN
Carefully place a specimen slide under the
stage clips (5) and center the specimen.
Images will be observed upside down and
reversed right to left. Prepared slides are
included with your microscope to help you
get started.
You are now ready to focus and view a
specimen. Be careful not to damage the
specimen slide.. When using higher powers
while focusing, make sure the objective lens
(4) does not hit the slide or object being
viewed.
FOCUSING AND CHANGING
POWER (MAGNIFICATION)
1.
Always start with lowest power (4x
objective lens and WF 10x eyepiece). This
combination yields the lowest power.
2.
Place a specimen slide (or object) on
the stage (6) directly under the objective
lens (4). Gradually turn the focus knob
(11) until the specimen is in focus.
CM800
Model # 44128
9
11
8
13
14
12
10
3
4
2
1
6
7
5