Celestron Skyris 132M Skyris 132 Manual
Celestron Skyris 132M Manual
 |
View all Celestron Skyris 132M manuals
Add to My Manuals
Save this manual to your list of manuals |
Celestron Skyris 132M manual content summary:
- Celestron Skyris 132M | Skyris 132 Manual - Page 1
95508 • SKYRIS 132C • 95509 SKYRIS 132M USB 3.0 ASTRONOMICAL CMOS CAMERA INSTRUCTIONAL MANUAL - Celestron Skyris 132M | Skyris 132 Manual - Page 2
SKYRIS CAMERA BODY iCAP SOFTWARE CD NOSEPIECE NOSEPIECE USB 3.0 CABLE SYSTEM REQUIREMENTS // Computer with Windows XP, Vista, 7, or 8 (32-bit and 64-bit supported Mount, Altitude-Azimuth or German Equatorial (recommended) 2 CAMERA DRIVER INSTALLATION 1. Insert the software CD into your computer's - Celestron Skyris 132M | Skyris 132 Manual - Page 3
Wizard will appear and prompt you to connect your camera. 4. Plug the Skyris camera into the computer's USB port using the included cable. If equipped, use a USB 3.0 port. The Driver Installation Wizard will automatically detect your Skyris model. Click Next and proceed through the prompts until - Celestron Skyris 132M | Skyris 132 Manual - Page 4
files will later be exported to RegiStax and processed as shown in "Processing Images." 1. Set up your telescope and point it at a bright target such as manual, "Connecting the Camera to a Telescope." 4. Locate the iCap shortcut on your desktop and open iCap. iCap 2.3 5. Select your Skyris camera - Celestron Skyris 132M | Skyris 132 Manual - Page 5
is included with your software CD and will debayer the images. You may also capture in Y16 mode to retain the full bit depth of the camera. Y16 video must be exported to a program that supports 16-bit video, which is not included with Skyris. 8 12. Click the Advanced tab to access custom video - Celestron Skyris 132M | Skyris 132 Manual - Page 6
alignment process. 5. Select the Best Frame option under the Limit Setup box (D) and enter a number that represents one-half of the number of image frames that were captured, i.e. if 300 frames were captured, then enter 150. Press the Limit button (E). 6. You will automatically advance to the - Celestron Skyris 132M | Skyris 132 Manual - Page 7
color balance in your astroimages. Skyris monochrome cameras require the use of Red, Green, and Blue (RGB) imaging filters to achieve a color image. A filter wheel helps you easily toggle between the filters while imaging. A Skyris Filter Wheel is available from Celestron (filters not included). 12 - Celestron Skyris 132M | Skyris 132 Manual - Page 8
Weight iCap, IC Capture, DirectShow, FireCapture 12-bit USB, 5V 500mA 3.6 oz CAMERA-SPECIFIC SPECIFICATIONS Max frame rate Imaging sensor Operating environment Camera resolution Sensor size Pixel size Skyris 132M (95508) Skyris 132C (95509) 200 fps Aptina AR0132AT 40°C to -40°C (104°F to -40 - Celestron Skyris 132M | Skyris 132 Manual - Page 9
Street Torrance, CA • 90503 U.S.A. Telephone: 800.421.9649 • www.celestron.com FCC Note: This equipment has been tested and found to comply frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
 |
 |
INSTRUCTIONAL MANUAL
USB 3.0
ASTRONOMICAL CMOS CAMERA
95508 •
SKYRIS
132C
•
95509
SKYRIS
132M