Cisco 1760 Hardware Installation Guide - Page 47
Attaching Brackets to the Rack, Attaching the Optional Cable Guide - chassis
UPC - 746320684857
View all Cisco 1760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Chapter 2 Installation Mounting the Router in a Rack Attaching Brackets to the Rack After you attach the brackets to the router, use the four supplied number-12 Phillips machine screws to securely attach the brackets to the rack, as shown in Figure 2-3. Caution Make sure that the fans on the side of the chassis are not blocked. Figure 2-3 Attaching Brackets to the Rack PWR OK PVDM 0 OK PVDM 1 OK MOD OK SLOT0 0 OK 1 SLOT1 0 OK 1 CONSOLE ACT COL FDX 100 LINK 10/100 ETHERNET AUX SLOT2 0 OK 1 SLOT3 0 OK 1 Cisco 1700 Series 60941 Phillips machine screws Attaching the Optional Cable Guide Cisco recommends attaching the cable guide to prevent the cables from obscuring the front panel of the router and the other devices installed in the rack. If the router is in a 19-inch or 24-inch rack, use the supplied black screw, as shown in Figure 2-4, to attach the cable guide to the left or right bracket. 78-13342-03 Cisco 1760 Modular Access Router Hardware Installation Guide 2-5