Cisco 1760 Hardware Installation Guide - Page 91
C-6, Installing a PVDM, Step 3, Caution
UPC - 746320684857
View all Cisco 1760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Appendix C Installing and Upgrading Memory and Packet Voice Data Modules Figure C-6 Installing a PVDM 2 1 Snaps Installing a PVDM 60959 Step 3 Step 4 If only one module is to be installed, install it into PVDM slot 0. Face the front panel of the router. Insert the module vertically into the PVDM slot. Orient the module so that the indexing slot in the connector (bottom edge) of the module is lined up with the indexing tab inside the PVDM slot, and so that all electrical connections are made. Caution Handle PVDMs by the edges only. PVDMs are ESD-sensitive components and can be damaged by mishandling. Step 5 Holding the module firmly in the slot, rotate it toward the rear of the router, until you hear a clicking sound and the module is firmly seated in the slot. Make sure that the snaps on both ends of the PVDM are engaged. 78-13342-03 Cisco 1760 Modular Access Router Hardware Installation Guide C-9