Cisco 1760 Hardware Installation Guide - Page 92
Closing the Chassis
UPC - 746320684857
View all Cisco 1760 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 92 highlights
Closing the Chassis Appendix C Installing and Upgrading Memory and Packet Voice Data Modules Closing the Chassis After installing memory or data modules on the motherboard, close the chassis by following these steps: Step 1 Step 2 Slide the top cover of the router back on the bottom of the chassis by pushing it in the opposite direction from that shown in Figure C-2, "Removing the Top Cover of the Router," on page C-3. Replace the screws that you removed when you opened the chassis. (See Figure C-1, "Removing the Cisco 1760 Chassis Screws," on page C-3.) C-10 Cisco 1760 Modular Access Router Hardware Installation Guide 78-13342-03
Appendix C
Installing and Upgrading Memory and Packet Voice Data Modules
Closing the Chassis
C-10
Cisco 1760 Modular Access Router Hardware Installation Guide
78-13342-03
Closing the Chassis
After installing memory or data modules on the motherboard, close the chassis by
following these steps:
Step 1
Slide the top cover of the router back on the bottom of the chassis by pushing it
in the opposite direction from that shown in
Figure C-2
, “
Removing the Top
Cover of the Router
,” on page C-3.
Step 2
Replace the screws that you removed when you opened the chassis. (See
Figure C-1
, “
Removing the Cisco 1760 Chassis Screws
,” on page C-3.)