Cisco 3640A Hardware Installation Guide

Cisco 3640A Manual

Get Cisco 3640A PDF manuals and user guides
UPC - 746320724546
View all Cisco 3640A manuals
Add to My Manuals
Save this manual to your list of manuals

Cisco 3640A manual content summary:

  • Cisco 3640A | Hardware Installation Guide - Page 1
    Cisco 3600 Series Routers Hardware Installation Guide Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 Text Part Number: OL-2056-05
  • Cisco 3640A | Hardware Installation Guide - Page 2
    , LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. CCIP, CCSP, the Cisco Arrow logo, the Cisco Powered Network mark, Cisco Unity, Follow Me Browsing, FormShare, and
  • Cisco 3640A | Hardware Installation Guide - Page 3
    and Information xx Overview of Cisco 3600 Series Routers 1-1 Hardware Features 1-1 Modules and Interface Cards 1-5 Memory 1-6 Memory Types 1-6 Memory Installation Documentation 1-6 Memory Specifications 1-6 Interface Numbering 1-8 Cisco 3620 and Cisco 3640 Interfaces 1-8 Slot Numbering 1-8 Unit
  • Cisco 3640A | Hardware Installation Guide - Page 4
    2-13 ISDN BRI Connections 2-13 56-K/Switched-56-kbps DSU/CSU Connections 2-14 Installing the Router 3-1 Installing Modules, Interface Cards, and Power Supplies 3-2 Installing the Chassis 3-3 Setting the Chassis on a Desktop 3-3 Cisco 3600 Series Routers Hardware Installation Guide iv OL-2056-05
  • Cisco 3640A | Hardware Installation Guide - Page 5
    the DC-Input Power Supply in Cisco 3620 and Cisco 3640 Routers 3-28 Wiring the DC-Input Power Supply in Cisco 3631 Routers 3-30 Wiring the DC-Input Power Supply in Cisco 3660 Routers 3-32 Connecting Routers to the Cisco Redundant Power System 3-36 Connecting WAN, LAN, and Voice Cables 3-37 Ports and
  • Cisco 3640A | Hardware Installation Guide - Page 6
    Problems A-1 Troubleshooting the Power and Cooling Systems A-2 Environmental Reporting Features A-3 Troubleshooting Modules, Cables, and Connections A-3 Reading Front-Panel LEDs A-4 Front-Panel LEDs on Cisco 3620, Cisco 3640, and Cisco 3660 Routers A-4 Front-Panel LEDs on Cisco 3631 Routers
  • Cisco 3640A | Hardware Installation Guide - Page 7
    , it is not comprehensive. For detailed software configuration information, refer to the Software Configuration Guide for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Routers and to the Cisco IOS configuration guide and command reference publications. These publications are available
  • Cisco 3640A | Hardware Installation Guide - Page 8
    the router console, auxiliary, and network ports. Describes how to isolate problems, read LEDs, interpret error and status messages, recover an enable password, and recover software images. Describes the ROM monitor (bootstrap program). Describes the configuration register settings, factory default
  • Cisco 3640A | Hardware Installation Guide - Page 9
    the warnings that appear in this publication, refer to the Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Regulatory Compliance and Safety Information document that accompanied your router. Warning IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger. You are in a situation
  • Cisco 3640A | Hardware Installation Guide - Page 10
    qui accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la fin de chaque avertissement. CONSERVEZ CES INFORMATIONS Warnung sikkerhetsadvarslene som fulgte med denne enheten. TA VARE PÅ DISSE INSTRUKSJONENE Cisco 3600 Series Routers Hardware Installation Guide x OL-2056-05
  • Cisco 3640A | Hardware Installation Guide - Page 11
    som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning. SPARA DESSA ANVISNINGAR OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide xi
  • Cisco 3640A | Hardware Installation Guide - Page 12
    åelse af ulykker. Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed. GEM DISSE ANVISNINGER Cisco 3600 Series Routers Hardware Installation Guide xii OL-2056-05
  • Cisco 3640A | Hardware Installation Guide - Page 13
    Preface Safety Warnings OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide xiii
  • Cisco 3640A | Hardware Installation Guide - Page 14
    Related Documentation The Cisco IOS software running your Cisco 3600 series router includes extensive features and functionality. For information that is beyond the scope of this document, or for additional information, use the following resources: Timesaver Make sure that you have access to the
  • Cisco 3640A | Hardware Installation Guide - Page 15
    Routers Cisco Network Modules Hardware Installation Guide Quick Start Guide: Interface Cards for Cisco 1600, 1700, 2600, 3600, and 3700 Series Cisco Interface Cards Hardware Installation Guide Upgrading System Memory in Cisco 3600 Series Routers Installing and Configuring Flash Memory Cards in Cisco
  • Cisco 3640A | Hardware Installation Guide - Page 16
    ship a replacement part within ten (10) working days after receipt of a Return Materials Authorization (RMA) request. Actual delivery times can vary, depending on the customer location. Cisco reserves the right to refund the purchase price as its exclusive warranty remedy. Cisco 3600 Series Routers
  • Cisco 3640A | Hardware Installation Guide - Page 17
    .html All users can order annual or quarterly subscriptions through the online Subscription Store: http://www.cisco.com/go/subscription Click Subscriptions & Promotional Materials in the left navigation bar. OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide xvii
  • Cisco 3640A | Hardware Installation Guide - Page 18
    Accessing all the tools on the Cisco TAC website requires a Cisco.com user ID and password. If you have a valid service contract but do not have a login ID or password, register at this URL: http://tools.cisco.com/RPF/register/register.do xviii Cisco 3600 Series Routers Hardware Installation Guide
  • Cisco 3640A | Hardware Installation Guide - Page 19
    hours to restore service to satisfactory levels. Priority 4 (P4)-You require information or assistance with Cisco product capabilities, installation, or configuration. There is little or no effect on your business operations. OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide xix
  • Cisco 3640A | Hardware Installation Guide - Page 20
    investment. Included are networking deployment and troubleshooting tips, configuration examples, customer case studies, tutorials and training, certification information, and links to numerous in-depth online resources. You can access Packet magazine at this URL: http://www.cisco.com/packet • iQ
  • Cisco 3640A | Hardware Installation Guide - Page 21
    (PCMCIA) cards (Cisco 3620, Cisco 3640, and Cisco 3660 routers only) • Flash memory capability • Sockets for memory modules; either: - Four sockets for DRAM single in-line memory modules (SIMMs), user-configurable as shared memory or main (processor) memory (Cisco 3620 and Cisco 3640 routers only
  • Cisco 3640A | Hardware Installation Guide - Page 22
    Power System (RPS) Figure 1-1 Front Panel of the Cisco 3620 Router H7336 Cisco 3631 The Cisco 3631 router includes these additional features: • High-performance 240-MHz PMC-Sierra RM7061A RISC processor • One 10/100 Ethernet port • Two slots for network modules • One compact Flash memory card
  • Cisco 3640A | Hardware Installation Guide - Page 23
    Hardware Features Cisco 3640 The Cisco 3640 router includes these additional features: • High-performance 100-MHz RISC processor • Four slots for network modules • Can be installed in a 19-, 23-, or 24-inch rack, or on a desk • Can receive DC power from the Cisco Redundant Power System (RPS
  • Cisco 3640A | Hardware Installation Guide - Page 24
    2 CN/LP RXC RXD TXC TXD VIC FXS 1 SEE MANUAL BEFORE INSTALLATION 0 HIGH SPEED SERIAL 1HSSI V0 EN SERIAL 1 CN/LP RXC RXD TXC TXD SERIAL 0 ETHERNET 4E CN/LP RXC RXD TXC TXD EN ETH 3 ETH 2 ETH 1 321 0 LINK ACT H ETH 0 Cisco 3600 Series Routers Hardware Installation Guide 1-4 OL-2056-05
  • Cisco 3640A | Hardware Installation Guide - Page 25
    - Quick Start Guide: Network Modules for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Routers - Cisco Network Modules Hardware Installation Guide • For information on installing WICs and VICs, refer to the following documents: - Quick Start Guide: Interface Cards for Cisco 1600, 1700
  • Cisco 3640A | Hardware Installation Guide - Page 26
    , NVRAM, and Flash memory SIMMs, refer to the following hardware configuration note: • Upgrading System Memory in Cisco 3600 Series Routers For information about installing Flash memory PCMCIA cards, refer to the following hardware configuration note: • Installing and Configuring Flash Memory Cards
  • Cisco 3640A | Hardware Installation Guide - Page 27
    and Memory Specifications Description Specification Processor 225-MHz QED RM5271 SDRAM (main plus shared) 32 to 256 MB NVRAM 128 KB Flash memory (SIMM) 8 to 64 MB Flash memory (PCMCIA) 2 to 40 MB Boot ROM 512 KB Memory OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide
  • Cisco 3640A | Hardware Installation Guide - Page 28
    MANUAL BEFORE INSTALLATION ETHERNET 1 BRI NT1 ETHERNET 0 thernet 1/1 W0 2E 2W W1 SERIAL AUI EN ETHERNET 1 Ethernet 1/0 SERIAL ETHERNET 0 2 W0 SERIAL AUI EN INPUT 100-240VAC 50/60HZ 3.0-1.5 AMPS Ethernet 0/1 Ethernet 0/0 Power supply Cisco 3600 Series Routers Hardware Installation Guide
  • Cisco 3640A | Hardware Installation Guide - Page 29
    -port asynchronous network module in slot 1 (containing interfaces serial 1/0 through serial 1/31) • An alarm interface controller network module in slot 2 (internally connected to interface serial 2/0) • One built-in Ethernet 10/100 interface-FastEthernet 0/0 OL-2056-05 Cisco 3600 Series Routers
  • Cisco 3640A | Hardware Installation Guide - Page 30
    numbered serial 0/2. - If slot W0 contains a 2-port serial WIC and slot W1 contains a 1-port BRI WIC, the interfaces in physical slot W0 are numbered serial 0/0 and serial 0/1, and the interface in physical slot W1 is numbered BRI 0/0. 1-10 Cisco 3600 Series Routers Hardware Installation Guide OL
  • Cisco 3640A | Hardware Installation Guide - Page 31
    Cisco 3660 Interfaces Each individual network interface on a Cisco 3600 series router is identified by a slot number and port number. Slot Numbering The Cisco 3660 router chassis has six network module slots. Each network module slot accepts a variety of network module interface cards, supporting
  • Cisco 3640A | Hardware Installation Guide - Page 32
    Cisco 3600 series system specifications. Table 1-5 Cisco 3620 Router System Specifications Description Dimensions (H x W x D) Weight Input voltage, AC power supply Current Frequency Input surge current (AC) Input rating, DC power supply Current Input surge current (DC) Power dissipation Console
  • Cisco 3640A | Hardware Installation Guide - Page 33
    1-6 Cisco 3631 Router System Specifications Description Dimensions (H x W x D) Weight Input voltage, AC power supply Current Frequency Input surge current (AC) Input rating, DC power supply Operational between Current Input surge current (DC) Power dissipation Console and auxiliary ports Operating
  • Cisco 3640A | Hardware Installation Guide - Page 34
    of Cisco 3600 Series Routers Table 1-7 Cisco 3640 Router System Specifications Description Specification Dimensions (H x W x D) 3.44 x 17.5 x 15.8 inches (8.7 x 44.5 x 40.0 cm), two rack units in height Weight 30 lb (13.6 kg), including chassis and four modules Input voltage, AC power supply
  • Cisco 3640A | Hardware Installation Guide - Page 35
    Series Routers Regulatory Compliance Table 1-8 Cisco 3660 Router System Specifications Description Specification Dimensions (H x W x D) 8.75 x 17.5 x 11.5 inches (22.1 x 44.5 x 29.1 cm), five rack units in height Weight 48 lb (21.8 kg), including chassis, six modules, and two power supplies
  • Cisco 3640A | Hardware Installation Guide - Page 36
    Regulatory Compliance Chapter 1 Overview of Cisco 3600 Series Routers 1-16 Cisco 3600 Series Routers Hardware Installation Guide OL-2056-05
  • Cisco 3640A | Hardware Installation Guide - Page 37
    the equipment unsafe. Safety with Electricity Follow these guidelines when working on equipment powered by electricity: Warning Read the installation instructions before connecting the system to the power source. Statement 1004 OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide 2-1
  • Cisco 3640A | Hardware Installation Guide - Page 38
    chassis - Working near power supplies • Look carefully for possible hazards in your work area, such as moist floors, ungrounded power extension cables, frayed power cords, and missing should be between 1 and 10 megohms (Mohm). Cisco 3600 Series Routers Hardware Installation Guide 2-2 OL-2056-05
  • Cisco 3640A | Hardware Installation Guide - Page 39
    Cisco 3600 series routers. Table 2-1 Power Requirements for Cisco 3600 Series Routers Router Cisco 3620 Cisco 3631 Cisco 3640 Cisco 3660 Power Supply AC DC, nominal 48 VDC AC DC, nominal 24/48 VDC DC, nominal 48 VDC AC DC, nominal 48 VDC AC DC, nominal 24/48 VDC DC, nominal 48 VDC Input Power
  • Cisco 3640A | Hardware Installation Guide - Page 40
    prevent future problems. Site Configuration The following precautions will help you plan an acceptable operating environment for your router and will and module rear panels are secure. All empty network module slots, WAN interface card slots, and power supply bays (in the Cisco 3660 router) must
  • Cisco 3640A | Hardware Installation Guide - Page 41
    rack frame does not block the intake ports or exhaust ports. If the chassis is installed on slides Power off other equipment in the rack (and in adjacent racks) to allow the router under test a maximum of cooling air and clean power. OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide
  • Cisco 3640A | Hardware Installation Guide - Page 42
    connections established ASCII terminal (for local configuration) or modem (for remote configuration) Signal distance limits verified Startup sequence steps completed Initial operation verified Software image verified Cisco 3600 Series Routers Hardware Installation Guide 2-6 OL-2056-05
  • Cisco 3640A | Hardware Installation Guide - Page 43
    cables or additional rack-mount brackets) • Cisco 3620 and Cisco 3640 Modular Access Routers Quick Start Guide, if applicable • Cisco 3631 Router Quick Start Guide, if applicable • Cisco 3660 Modular Access Router Quick Start Guide, if applicable • Cisco 2600 Series, Cisco 3600 Series, and Cisco
  • Cisco 3640A | Hardware Installation Guide - Page 44
    ports (dependent on configuration). Note For more information on cable specifications, refer to the Cisco Modular Access Router Cable Specifications document online or on the Documentation CD-ROM. • Ethernet hub or PC with a network interface card for connection to Ethernet (LAN) ports. • Console
  • Cisco 3640A | Hardware Installation Guide - Page 45
    auxiliary port, refer to the "Connecting to a Console Terminal or Modem" section on page 3-43. For cable and port pinouts, refer to the Cisco Modular Access Router Cable Specifications document online or on the Documentation CD-ROM. OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide
  • Cisco 3640A | Hardware Installation Guide - Page 46
    DSU/CSU Connections, page 2-14 Refer to the following online documents for more information about network connections and interfaces: • Cisco Network Modules Hardware Installation Guide • Cisco Interface Cards Installation Guide • Cisco Modular Access Router Cable Specifications Warning To avoid
  • Cisco 3640A | Hardware Installation Guide - Page 47
    Ring Port Pinouts" in the Cisco Modular Access Router Cable Specifications online document for the Token Ring port pinouts. This document is available online and on the Cisco Documentation CD-ROM. Serial Connections Serial connections are provided by WAN interface cards and network modules. For
  • Cisco 3640A | Hardware Installation Guide - Page 48
    All serial ports configured as DTE require external clocking from a CSU/DSU or other DCE device. Although manufacturing your own serial cables is not recommended (because of the small size of the pins on the DB-60 serial connector), cable pinouts are provided in the Cisco Modular Access Router Cable
  • Cisco 3640A | Hardware Installation Guide - Page 49
    ISDN. Table 2-4 lists the specifications for ISDN BRI cables. Also, refer to the Cisco Modular Access Router Cable Specifications online document for pinouts. This document is located on Cisco.com and the Documentation CD-ROM. OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide 2-13
  • Cisco 3640A | Hardware Installation Guide - Page 50
    /CSU WAN interface card. For more information on Switched-56-kbps WAN interface cards, refer to the Cisco Interface Cards Installation Guide online document. This document is located on Cisco.com and the Documentation CD-ROM. 2-14 Cisco 3600 Series Routers Hardware Installation Guide OL-2056-05
  • Cisco 3640A | Hardware Installation Guide - Page 51
    CH A P T E R 3 This chapter describes how to install your Cisco 3600 series router and connect it to networks and external devices. It contains the following sections: • Installing Modules, Interface Cards, and Power Supplies, page 3-2 • Installing the Chassis, page 3-3 • Installing Chassis Ground
  • Cisco 3640A | Hardware Installation Guide - Page 52
    Cards Hardware Installation Guide For AIMs: • AIM Installation Quick Start Guide: Cisco 2600, 3600, and 3700 Series • Installing Advanced Integration Modules in Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Routers For internal power supplies: • Installing Power Supplies in Cisco
  • Cisco 3640A | Hardware Installation Guide - Page 53
    or after rack-mounting the router. Ideally, you would install modules or WAN interface cards when you have the best access to the router's rear panel. Note You need a number 2 Phillips screwdriver to mount the chassis in a rack. OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide 3-3
  • Cisco 3640A | Hardware Installation Guide - Page 54
    for chassis side with fans Figure 3-3 Cisco 3631 Rack-Mount Brackets for 23-Inch Rack 23" ETSI, NEBS RIGHT 23" ETSI, NEBS LEFT Slots for cable tie attachment For chassis side opposite fans For chassis side with fans 82532 Cisco 3600 Series Routers Hardware Installation Guide 3-4 OL-2056-05
  • Cisco 3640A | Hardware Installation Guide - Page 55
    Router You can rack-mount a Cisco 3600 series router with either the front or the rear of the chassis facing forward. See the following sections for bracket installation instructions supplied with the brackets for this installation. Note If you are installing a Cisco 3620 or Cisco 3640 router in
  • Cisco 3640A | Hardware Installation Guide - Page 56
    chassis. Figure 3-7 Cisco 3620 or Cisco 3640 Bracket Attachment-Front Panel Forward (19-Inch Rack with a 17.75-Inch Opening) 11005 0123 ACTIVE READY 1 0 PCMCIA Note: The second bracket attaches to the other side of the chassis. Cisco 3600 Series Routers Hardware Installation Guide 3-6 OL-2056
  • Cisco 3640A | Hardware Installation Guide - Page 57
    3 Installing the Router Installing the Chassis Figure 3-8 Cisco 3620 or Cisco 3640 Bracket Attachment-Front Panel Forward (23- or 24-Inch Rack) H6252 0123 ACTIVE READY 1 0 PCMCIA Note: The second bracket attaches to the other side of the chassis. Figure 3-9 Cisco 3631 Bracket Attachment
  • Cisco 3640A | Hardware Installation Guide - Page 58
    ) 17327 Note: The second bracket attaches to the other side of the chassis. Figure 3-11 Cisco 3660 Bracket Attachment-Front Panel Forward (23-Inch Rack) 26322 Note: The second bracket attaches to the other side of the chassis. Cisco 3600 Series Routers Hardware Installation Guide 3-8 OL-2056-05
  • Cisco 3640A | Hardware Installation Guide - Page 59
    of the chassis. Figure 3-13 Cisco 3620 or Cisco 3640 Bracket Attachment-Rear Panel Forward (19-Inch Rack with a 17.75-Inch Opening) 15854 WO BRI S/T AUI EN Note: The second bracket attaches to the other side of the chassis. OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide 3-9
  • Cisco 3640A | Hardware Installation Guide - Page 60
    rack SEE MANUAL BEFORE INSTALLATION DSU 56K SEE MANUAL BEFORE INSTALLATION Four screws are required on each side. Left (narrow) bracket for 19-inch rack Left bracket for 23-inch rack TD RD LP AL CD LEFT 23" ETSI, NEBS LEFT 82536 3-10 Cisco 3600 Series Routers Hardware Installation Guide OL
  • Cisco 3640A | Hardware Installation Guide - Page 61
    82808 Note: The second bracket attaches to the other side of the chassis. Figure 3-17 Cisco 3660 Bracket Attachment-Rear Panel Forward (23-Inch Rack) 82806 Note: The second bracket attaches to the other side of the chassis. OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide 3-11
  • Cisco 3640A | Hardware Installation Guide - Page 62
    rack TD RD LP AL CD SEE MANUAL BEFORE INSTALLATION DSU 56K SEE MANUAL BEFORE INSTALLATION Use two screws on each side. LEFT 82534 Left (narrow) bracket for 19-inch rack Left bracket for 23-inch rack 23" ETSI, NEBS LEFT 3-12 Cisco 3600 Series Routers Hardware Installation Guide OL-2056-05
  • Cisco 3640A | Hardware Installation Guide - Page 63
    Chapter 3 Installing the Router Installing the Chassis Figure 3-21 Cisco 3640 Center-Mount Bracket Attachment (Requires Optional NEBS/ETSI Kit) 10970 0123 ACTIVE READY 1 0 PCMCIA Note: The second bracket attaches to the other side of the chassis. Figure 3-22 Cisco 3660 Center-Mount Bracket
  • Cisco 3640A | Hardware Installation Guide - Page 64
    to lift or tilt the chassis using the handles on modules (such as power supplies, fans, or cards); these types of handles are not designed to support the weight of the unit. Statement 1032 Figure 3-23 through Figure 3-25 show the Cisco 3640 router in a standard 19-, 23-, or 24-inch rack. The
  • Cisco 3640A | Hardware Installation Guide - Page 65
    or Cisco 3640 Router (23- or 24-Inch Rack) 15857 23-inch rack 24-inch rack Note: The second bracket attaches to the rack at the other side of the chassis. The brackets can also be installed with the front panel forward. OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide 3-15
  • Cisco 3640A | Hardware Installation Guide - Page 66
    62548 SERIES Note: The brackets can also be installed with the rear panel forward. Figure 3-27 Mounting the Cisco 3631 Router (23- Inch Rack) SERIES RIGHT 62547 Note: The brackets can also be installed with the rear panel forward. 3-16 Cisco 3600 Series Routers Hardware Installation Guide OL
  • Cisco 3640A | Hardware Installation Guide - Page 67
    with the front panel forward. After the router has been installed, you must connect the chassis to a reliable earth ground. For the chassis ground connection procedures, see the "Installing Chassis Ground Connection" section on page 3-19. Cisco 3600 Series Routers Hardware Installation Guide 3-17
  • Cisco 3640A | Hardware Installation Guide - Page 68
    , or use wall anchors. After the router is installed, you must connect the chassis to a reliable earth ground. For the chassis ground connection procedures, see the "Installing Chassis Ground Connection" section on page 3-19. 3-18 Cisco 3600 Series Routers Hardware Installation Guide OL-2056-05
  • Cisco 3640A | Hardware Installation Guide - Page 69
    bracket attachment for the AC power supply and the Cisco Redundant Power System (RPS) is similar. Figure 3-31 Required Ground-Lug Bracket Attachment on a Cisco 3620 Router (DC Power Supply Shown) 15849 OL-2056-05 Bracket Power supply Cisco 3600 Series Routers Hardware Installation Guide 3-19
  • Cisco 3640A | Hardware Installation Guide - Page 70
    point at your site. Figure 3-33 NEBS-Compliant Ground Lug Attachment on a Cisco 3620 Router with Internal AC or DC Power Supply 15850 Bracket Ground lug mounted on a Cisco 3620 router without Cisco RPS Power supply 3-20 Cisco 3600 Series Routers Hardware Installation Guide OL-2056-05
  • Cisco 3640A | Hardware Installation Guide - Page 71
    12V- - -5A, CISCO RPS -12V- - -3A Ground lug mounted on a Cisco 3620 router with Cisco RPS Bracket Power supply 15851 Figure 3-35 NEBS-Compliant Ground Lug Attachment on a Cisco 3640 Router Ground lug Power supply 15847 OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide 3-21
  • Cisco 3640A | Hardware Installation Guide - Page 72
    Using Ring Terminal on a Cisco 3620 Router with Redundant Power Supply (Cisco RPS) DC INPUT FOR USE WITH +5V- - -14A, +12V- - -5A, CISCO RPS -12V- - -3A Bracket Ring terminal attached to a bracket Power supply 103010 3-22 Cisco 3600 Series Routers Hardware Installation Guide OL-2056-05
  • Cisco 3640A | Hardware Installation Guide - Page 73
    . For cable connection procedures, see the "Power Connections" section on page 3-27, the "Connecting WAN, LAN, and Voice Cables" section on page 3-37, and the "Connecting to a Console Terminal or Modem" section on page 3-43. OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide 3-23
  • Cisco 3640A | Hardware Installation Guide - Page 74
    access, as required for your installation. For cable connection procedures, see the "Power Connections" section on page 3-27, the "Connecting WAN, LAN, and Voice Cables" section on page 3-37, and the "Connecting to a Console Terminal or Modem" section on page 3-43. 3-24 Cisco 3600 Series Routers
  • Cisco 3640A | Hardware Installation Guide - Page 75
    TXC TXD VIC FXS 1 SEE MANUAL BEFORE INSTALLATION 0 HIGH SPEED SERIAL 1HSSI V0 EN SERIAL 1 CN/LP RXC RXD TXC TXD SERIAL 0 ETHERNET 4E CN/LP RXC RXD TXC TXD EN ETH 3 ETH 2 ETH 1 321 0 LINK ACT H ETH 0 Ground lug OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide 3-25
  • Cisco 3640A | Hardware Installation Guide - Page 76
    access, as required for your installation. For cable connection procedures, see the "Power Connections" section on page 3-27, the "Connecting WAN, LAN, and Voice Cables" section on page 3-37, and the "Connecting to a Console Terminal or Modem" section on page 3-43. 3-26 Cisco 3600 Series Routers
  • Cisco 3640A | Hardware Installation Guide - Page 77
    (NEC) and other applicable codes. If your router has a DC-input power supply, follow the directions in this section for proper wiring. A router with a DC-input power supply has a terminal block for the DC power connections. OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide 3-27
  • Cisco 3640A | Hardware Installation Guide - Page 78
    all power cabling when installing this unit to avoid disturbing field-wiring connections. Step 2 For Cisco 3620 routers, strip the wires to the appropriate length for the terminal block on the power supply. For Cisco 3640 routers, crimp appropriate ring terminals or spade terminals to the DC power
  • Cisco 3640A | Hardware Installation Guide - Page 79
    3-44 DC Power Connections for Cisco 3640 Routers (Typical) Negative Terminal block Ground Terminal block Positive On/off switch H7477 72331 Step 4 Secure the wires using cable ties. Step 5 Turn on power to the DC circuit. OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide 3-29
  • Cisco 3640A | Hardware Installation Guide - Page 80
    . The strip length is 1/8 to 3/16 inch (3 to 5 mm) for Molex number 19193-0009 and for AMP number 324159-0 terminals. Crimp the terminals to the DC power input wires. 3-30 Cisco 3600 Series Routers Hardware Installation Guide OL-2056-05
  • Cisco 3640A | Hardware Installation Guide - Page 81
    avoid interference with the on/off switches, and to bring the wires close to the cable-tie attachment point, organize the wires downward from the terminal block. Warning The illustration shows the DC power supply terminal block. Wire the DC power supply as illustrated. The proper wiring sequence
  • Cisco 3640A | Hardware Installation Guide - Page 82
    power supply, follow the directions in this section for proper wiring. DC Wiring Requirements A Cisco 3660 router with a DC-input power supply requires copper wire for the power connections. Table 3-3 summarizes the wiring requirements. 3-32 Cisco 3600 Series Routers Hardware Installation Guide
  • Cisco 3640A | Hardware Installation Guide - Page 83
    . Wire the DC power supply as illustrated. The proper wiring sequence is ground to ground, positive to positive, and negative to negative. The ground wire should always be connected first and disconnected last. Statement 239 OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide 3-33
  • Cisco 3640A | Hardware Installation Guide - Page 84
    Caution Power wires must exit to the right, and the service loop must not extend above or below the power supply. Note The power wires may pass in front of the power supply cooling vents. The wires do not restrict ventilation. 3-34 Cisco 3600 Series Routers Hardware Installation Guide OL-2056
  • Cisco 3640A | Hardware Installation Guide - Page 85
    60 Hz DC PS -48V to -60V , 8A 82403 Chapter 3 Installing the Router Power Connections Figure 3-51 DC Wiring-Power Supply with Plug Connector in Cisco 3660 Routers Wire management bracket Negative Ground Positive DC terminal block OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide
  • Cisco 3640A | Hardware Installation Guide - Page 86
    the second power supply. Turn on power to the DC circuit. Connecting Routers to the Cisco Redundant Power System If your router uses the Cisco Redundant Power System (RPS), refer to the Cisco RPS Hardware Installation Guide for instructions about the power connections. You can access this document
  • Cisco 3640A | Hardware Installation Guide - Page 87
    for Cisco 3600 series routers. The connections summarized here are also described in detail in the following documents: • Cisco Modular Access Router Cable Specifications • Cisco Network Modules Hardware Installation Guide • Cisco Interface Cards Hardware Installation Guide You can access these
  • Cisco 3640A | Hardware Installation Guide - Page 88
    protocol (EIA/TIA-232, EIA/TIA-449, V.35, X.21, or EIA/TIA-530) and the serial port operating mode (DTE or DCE). Refer to the Cisco Modular Access Router Cable Specifications document for information about selecting these cables. RJ-11 RJ-48 T1 cable RJ-11 RJ-11 RJ-11 RJ-48 RJ-49 RJ-48 DB-15 T1
  • Cisco 3640A | Hardware Installation Guide - Page 89
    document Cisco Modular Access Router Cable Specifications. For more information about connecting and configuring network modules, WAN interface cards, and voice interface cards, refer to the following documents: • Cisco Network Modules Hardware Installation Guide • Cisco Interface Cards Hardware
  • Cisco 3640A | Hardware Installation Guide - Page 90
    at the left of the chassis, through the openings in the chassis shield, or through both areas. In each routing, all WAN, LAN, and voice cables must exit toward the left. (See Figure 3-55 and Figure 3-56.) 3-40 Cisco 3600 Series Routers Hardware Installation Guide OL-2056-05
  • Cisco 3640A | Hardware Installation Guide - Page 91
    cables in bundles such that cables do not intertwine. Inspect the cables to make sure that the routing and bend radiuses are satisfactory. Reposition cables, if necessary. Install cable ties in accordance with site requirements. OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide
  • Cisco 3640A | Hardware Installation Guide - Page 92
    SEE MANUAL BEFORE INSTALLATION 0 HIGH SPEED SERIAL 1HSSI V0 EN SERIAL 1 CN/LP RXC RXD TXC TXD SERIAL 0 ETHERNET 4E CN/LP RXC RXD TXC TXD EN ETH 3 ETH 2 ETH 1 321 0 LINK ACT H ETH 0 1 LAN, WAN, and voice cables 2 Power wires 3-42 Cisco 3600 Series Routers Hardware Installation Guide
  • Cisco 3640A | Hardware Installation Guide - Page 93
    cables 2 Power wires Connecting to a Console Terminal or Modem Your router has asynchronous serial console and auxiliary ports. These ports provide administrative access to your router either locally (with a console terminal or PC) or remotely (with a modem). Cisco provides the following cables
  • Cisco 3640A | Hardware Installation Guide - Page 94
    Figure 3-60.) For information about console port pinouts, refer to the Cisco Modular Access Router Cable Specifications document available online and on the Documentation CD-ROM. Note On the Cisco routers, the console port is color-coded blue. Step 2 Configure your terminal or terminal emulation
  • Cisco 3640A | Hardware Installation Guide - Page 95
    59 Connecting a Console Terminal to a Cisco 3640 Router H7223 OL-2056-05 SYSTEM RPS CON AUX Console port (RJ-45) 0123 ACTIVE READY 1 0 PCMCIA RJ-45-to-RJ-45 rollover cable RJ-45-to-DB-9 or RJ-45-to-DB-25 adapter Laptop computer Cisco 3600 Series Routers Hardware Installation Guide 3-45
  • Cisco 3640A | Hardware Installation Guide - Page 96
    sure that your modem and the router auxiliary port are configured for the same transmission speed (up to 115200 bps is supported) and hardware flow control with data carrier detect (DCD) and data terminal ready (DTR) operations. 3-46 Cisco 3600 Series Routers Hardware Installation Guide OL-2056
  • Cisco 3640A | Hardware Installation Guide - Page 97
    ASYNC 16-23 ASYNC 0-7 EN SEE MANUAL BEFORE INSTALLATION DSU 56K SEE MANUAL BEFORE INSTALLATION AUX port connector (RJ-45) RJ-45-to-RJ-45 rollover cable RJ-45-to-DB-9 or RJ-45-to-DB-25 adapter Modem TD RD LP AL CD 62577 OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide 3-47
  • Cisco 3640A | Hardware Installation Guide - Page 98
    to a Console Terminal or Modem Chapter 3 Installing the Router Figure 3-63 Connecting a Modem to the Auxiliary Port on the Cisco 3640 Router H7222 SYSTEM RPS Modem cable CON AUX AUX port (RJ-45) 0123 ACTIVE READY 1 0 PCMCIA RJ-45-to-DB-25 adapter EIA/TIA-232 Modem 3-48 Cisco 3600 Series
  • Cisco 3640A | Hardware Installation Guide - Page 99
    CN/LP RXC RXD TXC TXD SERIAL 0 ETHERNET 4E CN/LP RXC RXD TXC TXD EN ETH 3 ETH 2 ETH 1 321 0 LINK ACT H ETH 0 RJ-45-to-RJ-45 rollover cable AUX port connector (RJ-45) RJ-45-to-DB-9 or RJ-45-to-DB-25 adapter Modem OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide 3-49
  • Cisco 3640A | Hardware Installation Guide - Page 100
    Connecting to a Console Terminal or Modem Chapter 3 Installing the Router Identifying a Rollover Cable Use a rollover cable to connect to the asynchronous serial console and auxiliary ports. You can identify a rollover cable by comparing the two modular ends of the cable. Hold the cables side-by-
  • Cisco 3640A | Hardware Installation Guide - Page 101
    Redundant power supply (RPS) failure - Continuous on-System OK • Activity (green)-Blinks during system activity, such as interrupts and packet transfers For more detailed information about the LEDs, see Appendix A, "Troubleshooting." OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide
  • Cisco 3640A | Hardware Installation Guide - Page 102
    . In Cisco 3660 • The LED on each power supply comes on. • The system and PS1 (and PS2) LEDs on the router front and rear panels come on. Depending on your installation, Fast Ethernet (0/0, 0/1) and Network Module (Active, Ready) LEDs might also come on. If you encounter problems when you power up
  • Cisco 3640A | Hardware Installation Guide - Page 103
    router. You can also access the Cisco 3600 series routers quick start guides online at: http://www.cisco.com/univercd/cc/td/doc/product/access/acs_mod/cis3600/36xx_qsg/index.htm • If you see the following messages, the router has booted and is ready for initial configuration using the setup command
  • Cisco 3640A | Hardware Installation Guide - Page 104
    when viewing the configuration: The enable secret is a password used to protect access to privileged EXEC and configuration modes. This password, after entered, becomes encrypted in the configuration. Enter enable secret: xxxxxx 3-54 Cisco 3600 Series Routers Hardware Installation Guide OL-2056
  • Cisco 3640A | Hardware Installation Guide - Page 105
    for your network: Configure SNMP Network Management? [yes]: Community string [public]: A summary of the available interfaces is displayed: Note The interface numbering that appears is dependent on the type of Cisco modular router platform and on the installed interface modules and cards. Current
  • Cisco 3640A | Hardware Installation Guide - Page 106
    Software Configuration Guide for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Routers or the Cisco IOS software configuration documentation. You can access these documents on Cisco.com and on the Documentation CD-ROM. 3-56 Cisco 3600 Series Routers Hardware Installation Guide OL
  • Cisco 3640A | Hardware Installation Guide - Page 107
    privileged EXEC mode. Router> enable Router# For configuration using the CLI, refer to the Software Configuration Guide for Cisco 2600 Series, Cisco 3600 Series, and Cisco 3700 Series Routers or the Cisco IOS software configuration documentation. You can access these documents on Cisco.com and on
  • Cisco 3640A | Hardware Installation Guide - Page 108
    Configuring the Router Chapter 3 Installing the Router 3-58 Cisco 3600 Series Routers Hardware Installation Guide OL-2056-05
  • Cisco 3640A | Hardware Installation Guide - Page 109
    16 Note To troubleshoot a network module refer to the Cisco Network Modules Hardware Installation Guide; to troubleshoot a WAN interface card, refer to the Cisco Interface Cards Hardware Installation Guide. If you cannot locate the source of the problem, contact a customer service representative for
  • Cisco 3640A | Hardware Installation Guide - Page 110
    Problems Appendix A Troubleshooting When problem solving, consider the following router subsystems: • Power and cooling systems-External power source, power cable, router power supply and circuit breaker, and router blower and fan. Also consider inadequate ventilation or air circulation. • Modules
  • Cisco 3640A | Hardware Installation Guide - Page 111
    external cable connections. - Make sure that you have a version of Cisco IOS software that supports the network module and interface card. Check the Cisco Network Modules Hardware Installation Guide and the Cisco Interface Cards Hardware Installation Guide or accompanying configuration notes for
  • Cisco 3640A | Hardware Installation Guide - Page 112
    Describes the power supply LEDs (PS1 and PS2) • Table A-4-Describes the Active, Ready, and PCMCIA LEDs Figure A-1 Cisco 3620 Router Front-Panel LEDs SYSTEM RPS RPS LED System LED CON AUX Console port Auxiliary port 01 ACTIVE READY Network module status LEDs PCMCIA 1 0 PCMCIA PCMCIA slots LEDs
  • Cisco 3640A | Hardware Installation Guide - Page 113
    Appendix A Troubleshooting Figure A-2 Cisco 3640 Router Front-Panel LEDs Reading Front-Panel LEDs H7042 SYSTEM RPS System and RPS LEDs CON AUX 0123 ACTIVE READY Network activity LEDs Figure A-3 Cisco 3660 Router Front Panel LEDs 1 0 PCMCIA PCMCIA LEDs 17903 SYSTEM PS1 PS2 FE 0/0 0/1
  • Cisco 3640A | Hardware Installation Guide - Page 114
    . amber and green Note The Cisco 3660 router does not have the RPS LED described in Table A-2. Table A-2 RPS LED in Cisco 3620, Cisco 3640, and Cisco 3660 Routers Color Off Blinking green Solid green Amber RPS Status Not installed. RPS and the power supply are both operational. Because the
  • Cisco 3640A | Hardware Installation Guide - Page 115
    of network module slots in the router. (See Table A-4.) The Cisco 3620 router has two slots numbered 0 and 1; the Cisco 3640 router has four slots numbered 0, 1, 2, and 3; and the Cisco 3660 router has six slots numbered 1, 2, 3, 4, 5, and 6. Note The Cisco 3660 router has PCMCIA slots located
  • Cisco 3640A | Hardware Installation Guide - Page 116
    Reading Rear-Panel LEDs Appendix A Troubleshooting Table A-5 Cisco 3631 Front-Panel LEDs LED POWER SYS/RPS ACTIVITY Color Power Supply Status Off No power to system. Green Power to the system. Slow blinking green System initialization in progress. Solid green System software running. No
  • Cisco 3640A | Hardware Installation Guide - Page 117
    mainboard. The LED on each Cisco 3660 router power supply has the same function as the PS1 and PS2 LEDs on the Cisco 3660 router front panel. (See Table A-3.) The PCMCIA LEDs on the Cisco 3660 router rear panel are the same as those on the Cisco 3620 and Cisco 3640 router front panels. (See Table
  • Cisco 3640A | Hardware Installation Guide - Page 118
    for Cisco 3620 and Cisco 3640 routers powered by the Cisco RPS redundant power system are described in the publication Cisco RPS Hardware Installation Guide. Additional error messages for the Cisco 3660 router are described in the "Cisco 3660 Error Messages" section on page A-12. The Cisco IOS
  • Cisco 3640A | Hardware Installation Guide - Page 119
    block size. Explanation: Data stored in the backplane is either corrupt or incomplete. Recovery: Contact your technical support representative to upgrade your system. (See the "Obtaining Technical Assistance" section on page xviii.) Cisco 3600 Series Routers Hardware Installation Guide A-11
  • Cisco 3640A | Hardware Installation Guide - Page 120
    Color - Message Error: %INITSYS-1-PS: Explanation: The router failed to establish the environmental monitor process. This is probably because of insufficient memory available in the router. Recovery: Add memory to the router. A-12 Cisco 3600 Series Routers Hardware Installation Guide OL-2056-05
  • Cisco 3640A | Hardware Installation Guide - Page 121
    to the Replacing the Fan Cage in Cisco 3660 Routers hardware configuration note. When the error condition is resolved, the following informational message appears: %THERMOK-3-PS: Power System THERMAL condition is now normal. OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide A-13
  • Cisco 3640A | Hardware Installation Guide - Page 122
    the circuit breaker and the power supply. 5. If the error condition persists, replace the DC power supply. Refer to the Installing Universal DC Power Supplies in Cisco 3660 Routers or to the Installing Power Supplies in Cisco 3600 Series Routers hardware configuration note. When the error condition
  • Cisco 3640A | Hardware Installation Guide - Page 123
    Power on the circuit breaker (for a DC power supply), and the power supply. 5. If the error condition persists, replace the power supply. Refer to the Installing Universal DC Power Supplies in Cisco 3660 Routers or to the Installing Power Supplies in Cisco 3600 Series Routers hardware configuration
  • Cisco 3640A | Hardware Installation Guide - Page 124
    enable secret password that is configured on your router, you can replace it with a new enable secret password. For password recovery and replacement procedures for the Cisco 2600 series routers, refer to the Password Recovery Procedure for the Cisco 3600 Series Routers document at the following URL
  • Cisco 3640A | Hardware Installation Guide - Page 125
    Command Descriptions, page B-4 • Recovering Cisco IOS Software Images, page B-9 Entering ROM Monitor Mode To use the ROM monitor, you must have access to the console port. Refer to the "Connecting to a Console Terminal or Modem" section on page 3-43 for information on connecting the console cable
  • Cisco 3640A | Hardware Installation Guide - Page 126
    and display aliases command boot up an external process set/show/clear the breakpoint configuration register utility continue executing a downloaded image display the context of a loaded image display contents of cookie PROM in hex Cisco 3600 Series Routers Hardware Installation Guide B-2 OL-2056
  • Cisco 3640A | Hardware Installation Guide - Page 127
    serial download a program module frame print out a selected stack frame help monitor builtin command help history monitor command history iomemdef set IO mem to a default 25% meminfo main memory information repeat repeat a monitor command reset system reset rommon-pref select ROMMON
  • Cisco 3640A | Hardware Installation Guide - Page 128
    have enough Flash memory to hold large images. With a small image in Flash memory (just large enough to support the necessary interfaces), the router boots from Flash, and then the larger image is downloaded from the TFTP server. Cisco 3600 Series Routers Hardware Installation Guide B-4 OL-2056
  • Cisco 3640A | Hardware Installation Guide - Page 129
    IOS image on the specified TFTP server (after first booting from Flash). For example: boot c3660-is-mz 172.15.19.11 Note Use the CLI commands show version and show hardware to see the source of the currently running Cisco IOS image. OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide
  • Cisco 3640A | Hardware Installation Guide - Page 130
    MB 128 MB 16 MB 144 MB 128 MB 32 MB 160 MB 128 MB 64 MB 192 MB 128 MB 128 MB 256 MB rommon 2> Other Useful ROM Monitor Commands reset or i-Resets and initializes the router, similar to power on. Cisco 3600 Series Routers Hardware Installation Guide B-6 OL-2056-05
  • Cisco 3640A | Hardware Installation Guide - Page 131
    by Hexidecimal Entry" section on page B-8. In either case, the new configuration register value is written into NVRAM, but is not effective until you reboot (using the ROM monitor reset command) or power cycle the router. OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide B-7
  • Cisco 3640A | Hardware Installation Guide - Page 132
    interpreted as hexadecimal. The following example changes the value of the configuration register to the factory default: rommon 7> confreg 0x2102 You must reset or power cycle the router for new configuration to take effect. Cisco 3600 Series Routers Hardware Installation Guide B-8 OL-2056-05
  • Cisco 3640A | Hardware Installation Guide - Page 133
    upgrades. For the fastest possible download from a console, set the console speed to 115200 bps by using the confreg ROM monitor command. See the "Configuration Register Commands" procedure on page B-7. Note Using a PCMCIA card to update the Cisco IOS image is much faster than using the console port
  • Cisco 3640A | Hardware Installation Guide - Page 134
    the console using the instructions in the "Connecting to a Console Terminal or Modem" section on page 3-43. Power on the router. The power-on self-test diagnostics run and the boot ROM searches for a valid boot image and Cisco IOS image in Flash memory. If the boot image and Cisco IOS image are
  • Cisco 3640A | Hardware Installation Guide - Page 135
    • Enabling Booting from Flash Memory, page C-6 Configuration Register Settings The router has a 16-bit configuration register in NVRAM. You can use the configuration register to perform the following tasks: • Set and display the configuration register value • Force the router into the ROM monitor
  • Cisco 3640A | Hardware Installation Guide - Page 136
    register to perform the following tasks: • Recover a lost password • Change the console data rate • Enable or disable the Break function • Manually boot the operating system using the b command at the ROM monitor prompt • Force the router to automatically boot its system image in Flash memory, or
  • Cisco 3640A | Hardware Installation Guide - Page 137
    config-register 0xvalue Note Cisco IOS software does not allow you to change the console speed bits directly with the config-register command. To change the console speed, complete this sequence: Router# configure terminal Router(config)# line console 0 Router(config-line)# speed 9600 Step 8 Step
  • Cisco 3640A | Hardware Installation Guide - Page 138
    system image Enables default booting from Flash memory Enables boot system commands that override default booting from Flash memory The boot field specifies a number in binary form. If you set the boot field value to 0, you must have console port access to boot the operating system manually. Refer
  • Cisco 3640A | Hardware Installation Guide - Page 139
    (The default baud rate is 9600 bps.) Table C-4 Console Terminal Baud Rate Settings Baud 115200 57600 38400 19200 9600 4800 2400 1200 Bit 5 Bit 12 Bit 11 1 1 1 1 1 0 1 0 1 1 0 0 0 0 0 0 0 1 0 1 1 0 1 0 OL-2056-05 Cisco 3600 Series Routers Hardware Installation Guide C-5
  • Cisco 3640A | Hardware Installation Guide - Page 140
    a value as follows: config-reg 0x102 Ctrl-z If you set the configuration register value to 0x102, as in this example, you do not need to enter the boot system flash command unless there is more than one image in Flash memory. Cisco 3600 Series Routers Hardware Installation Guide C-6 OL-2056-05
  • Cisco 3640A | Hardware Installation Guide - Page 141
    mounting 3-3 to 3-17 Cisco 2600 series routers card slots (figure) 1-11 unit numbers (figure) 1-11 Cisco 3600 series routers unit numbers (figure) 1-8 Cisco IOS software locating documentation xv recovering images B-9 commands ? (help) B-2 boot B-5 configuration-register B-2, B-7 confreg B-7 context
  • Cisco 3640A | Hardware Installation Guide - Page 142
    from Flash memory C-6 configuration-register command B-2 confreg command B-7 connections AC power 3-27 asynchronous/synchronous serial 2-13 auxiliary port 2-9 console port 2-9, 3-44 DCE 2-11 DC power 3-27 to 3-36 DSU/CSU 2-14 DTE 2-11 Ethernet 2-10 ISDN BRI 2-13 modem 3-46 network 2-10 serial 2-11
  • Cisco 3640A | Hardware Installation Guide - Page 143
    to 1-12 Cisco 2600 series routers 1-8 WAN interface cards 1-11 IOS software locating documentation xv recovering images B-9 ISDN BRI 2-13 to 2-14 L LAN connections 3-37 to 3-41 interface types 2-10, 2-11 LEDs ACTIVE A-7 front panel A-4 to A-8 interpretation of A-2 PCMCIA A-7 power supply A-6 READY
  • Cisco 3640A | Hardware Installation Guide - Page 144
    command B-6 memory 1-6 to 1-7 modem connection 3-46 N netboot B-4 network connections 2-10 network modules, installing 1-5 nonvolatile random-access memory See NVRAM. NVRAM 1-6 P packing list 2-7 PCMCIA cards 1-6 PCMCIA LED (Cisco 3620, 3640, 3660) A-7 PCMCIA LED (Cisco 3660 rear panel) A-9 port
  • Cisco 3640A | Hardware Installation Guide - Page 145
    Cisco 3620 1-12 Cisco 3631 1-13 Cisco 3640 1-14 Cisco 3660 1-15 memory 1-6 processor 1-6 serial ports 2-12 system 1-12 stack command B-7 static electricity damage 2-2 SYS/RPS LED (Cisco 3631 front panel) A-8 sysret command B-7 SYSTEM LED (Cisco 3660 rear panel) A-9 T Tables configuration
  • Cisco 3640A | Hardware Installation Guide - Page 146
    access 3-1 secure power cabling 3-28, 3-30 SELV circuit 2-10 TN power systems 2-3 WAN port voltages 2-13 warnings, translations of ix WICs See WAN interface cards wiring AC power supplies 3-27 DC power supplies 3-27 to 3-36 telephone 2-2 X xmodem command B-9 IN-6 Cisco 3600 Series Routers
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
Corporate Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 526-4100
Cisco 3600 Series Routers
Hardware Installation Guide
Text Part Number: OL-2056-05