Cisco 3750-48PS Hardware Installation Guide

Cisco 3750-48PS - Catalyst SMI Switch Manual

Get Cisco 3750-48PS - Catalyst SMI Switch PDF manuals and user guides
UPC - 746320812519
View all Cisco 3750-48PS manuals
Add to My Manuals
Save this manual to your list of manuals

Cisco 3750-48PS manual content summary:

  • Cisco 3750-48PS | Hardware Installation Guide - Page 1
    Cisco.com % CD-ROM % Printed manuals % Other: 7 I prefer this access method: Cisco.com CD-ROM Printed manuals Other: 8 I use the following three product features the most: Document Information Document Title: Catalyst 3750 Switch Hardware Installation Guide mail to [email protected], or by
  • Cisco 3750-48PS | Hardware Installation Guide - Page 2
    NO POSTAGE NECESSARY IF MAILED IN THE UNITED STATES BUSINESS REPLY MAIL FIRST-CLASS MAIL PERMIT NO. 4631 SAN JOSE CA POSTAGE WILL BE PAID BY ADDRESSEE DOCUMENT RESOURCE CONNECTION CISCO SYSTEMS INC 170 WEST TASMAN DR SAN JOSE CA 95134-9916
  • Cisco 3750-48PS | Hardware Installation Guide - Page 3
    Catalyst 3750 Switch Hardware Installation Guide August 2003 Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 Customer Order Number: DOC-7815136= Text Part Number: 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 4
    be required to correct the interference at their own expense. The following information is for FCC compliance of Class B devices: The equipment described in this manual generates and may radiate radio-frequency energy. If it is not installed in accordance with Cisco's installation instructions, it
  • Cisco 3750-48PS | Hardware Installation Guide - Page 5
    , the Cisco Arrow logo, the Cisco Powered Network mark, Cisco Unity, Follow Me Browsing, FormShare, and StackWise are trademarks of Cisco Systems, Inc.; Changing the Way We Work, Live, Play, and Learn, and iQuick Study are service marks of Cisco Systems, Inc.; and Aironet, ASIST, BPX, Catalyst, CCDA
  • Cisco 3750-48PS | Hardware Installation Guide - Page 6
  • Cisco 3750-48PS | Hardware Installation Guide - Page 7
    xxvii Obtaining Additional Publications and Information xxviii Using Express Setup 1-1 Taking Out What You Need 1-2 Powering On the Switch 1-3 Starting Express Setup 1-4 Configuring the Switch Settings 1-9 Verifying Switch IP Address (Optional) 1-10 Catalyst 3750 Switch Hardware Installation Guide v
  • Cisco 3750-48PS | Hardware Installation Guide - Page 8
    2-16 Internal Power Supply Connector 2-16 Cisco RPS Connector 2-16 Console Port 2-17 Management Options 2-18 Network Configurations 2-19 Switch Installation 3-1 Preparing for Installation 3-1 Warnings 3-2 EMC Regulatory Statements 3-4 Catalyst 3750 Switch Hardware Installation Guide vi 78-15136
  • Cisco 3750-48PS | Hardware Installation Guide - Page 9
    Mounting 3-18 Removing Screws from the Switch 3-19 Attaching Brackets to the Catalyst 3750G-24TS Switch 3-20 Attaching Brackets to the Catalyst 3750-24TS, 3750G-24T, 3750G-12S, and 3750-48TS Switches 3-25 Mounting the Switch in a Rack 3-28 Attaching the Cable Guide 3-30 Wall Mounting 3-32 Attaching
  • Cisco 3750-48PS | Hardware Installation Guide - Page 10
    R Troubleshooting 4-1 Understanding POST Results 4-1 Clearing the Switch IP Address and Configuration 4-2 Diagnosing Problems 4-3 Replacing a Failed Stack Member 4-7 A A P P E N D I X Technical Specifications A-1 B A P P E N D I X Connector and Cable Specifications B-1 Connector Specifications
  • Cisco 3750-48PS | Hardware Installation Guide - Page 11
    D-4 Stacking the Switches (Optional) D-5 Connecting to the Console Port D-7 Starting the Terminal Emulation Software D-9 Connecting to a Power Source D-9 Entering the Initial Configuration Information D-10 IP Settings D-10 Completing the Setup Program D-11 78-15136-02 Catalyst 3750 Switch Hardware
  • Cisco 3750-48PS | Hardware Installation Guide - Page 12
    for Rack-Mounting and Servicing E-19 Redundant Power Supply Connection Warning E-24 Switch Installation Warning E-25 Restricted Area E-27 Ethernet Cable Shielding in Offices E-28 Laser Beam Exposure E-30 Laser Radiation E-31 E-32 Catalyst 3750 Switch Hardware Installation Guide x 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 13
    online, or click the PDF icon to download and print the document in Adobe Portable Document Format (PDF). Note You must have Adobe Acrobat Reader to view and print PDF files. You can download the reader from Adobe's website: http://www.adobe.com Catalyst 3750 Switch Hardware Installation Guide xi
  • Cisco 3750-48PS | Hardware Installation Guide - Page 14
    the Cisco service and support website for assistance: http://www.cisco.com/public/Support_root.shtml. Duration of Hardware Warranty A Cisco product hardware warranty is supported for as long as the original end user continues to own or use the product, provided that the fan and power supply warranty
  • Cisco 3750-48PS | Hardware Installation Guide - Page 15
    your Cisco Sales and Service Representative. Complete the information below, and keep it for reference. Company product purchased from Company telephone number Product model number Product serial number Maintenance contract number 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide xiii
  • Cisco 3750-48PS | Hardware Installation Guide - Page 16
    Cisco Limited Lifetime Hardware Warranty Terms Catalyst 3750 Switch Hardware Installation Guide xiv 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 17
    12.1 commands, refer to the IOS documentation set from the Cisco.com home page at Service and Support > Technical Documents. On the Cisco Product Documentation home page, select Release 12.1 from the Cisco IOS Software drop-down list. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide xv
  • Cisco 3750-48PS | Hardware Installation Guide - Page 18
    manual. Caution Means reader be careful. In this situation, you might do something that could result in equipment damage or loss of data. Warning IMPORTANT SAFETY INSTRUCTIONS geleverd, wilt raadplegen. BEWAAR DEZE INSTRUCTIES Catalyst 3750 Switch Hardware Installation Guide xvi 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 19
    éro de l'instruction situé à Ende jeder Warnung angegebenen Anweisungsnummer nach der jeweiligen Übersetzung in den übersetzten Sicherheitshinweisen, die zusammen mit diesem Gerät ausgeliefert wurden. BEWAHREN SIE DIESE HINWEISE GUT AUF. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide
  • Cisco 3750-48PS | Hardware Installation Guide - Page 20
    instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo. GUARDE ESTAS INSTRUÇÕES xviii Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 21
    som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning. SPARA DESSA ANVISNINGAR 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide xix
  • Cisco 3750-48PS | Hardware Installation Guide - Page 22
    Conventions Preface Catalyst 3750 Switch Hardware Installation Guide xx 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 23
    , refer to the release notes on Cisco.com for the latest information. • Catalyst 3750 Switch Software Configuration Guide (order number DOC-7815164=) • Catalyst 3750 Switch Command Reference (order number DOC-7815165=) • Catalyst 3750 Switch System Message Guide (order number DOC-7815166=) • Cluster
  • Cisco 3750-48PS | Hardware Installation Guide - Page 24
    : http://www.cisco.com/univercd/cc/td/doc/es_inpck/pdi.htm You can order Cisco documentation in these ways: • Registered Cisco.com users (Cisco direct customers) can order Cisco product documentation from the Networking Products MarketPlace: Catalyst 3750 Switch Hardware Installation Guide xxii 78
  • Cisco 3750-48PS | Hardware Installation Guide - Page 25
    Cisco TAC website (http://www.cisco.com/tac) provides online documents and tools for troubleshooting and resolving technical issues with Cisco products and technologies. The Cisco TAC website is available 24 hours a day, 365 days a year. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide
  • Cisco 3750-48PS | Hardware Installation Guide - Page 26
    established case priority definitions. Priority 1 (P1)-Your network is "down" or there is a critical impact to your business operations. You and Cisco will commit all necessary resources around the clock to resolve the situation. xxiv Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 27
    and troubleshooting tips, configuration examples, customer case studies, tutorials and training, certification information, and links to numerous in-depth online resources. You can access Packet magazine at this URL: http://www.cisco.com/go/packet 78-15136-02 Catalyst 3750 Switch Hardware
  • Cisco 3750-48PS | Hardware Installation Guide - Page 28
    about/ac123/ac147/about_cisco_the_internet_ protocol_journal.html • Training-Cisco offers world-class networking training. Current offerings in network training are listed at this URL: http://www.cisco.com/en/US/learning/index.html xxvi Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 29
    switch or a switch stack. Note Express Setup is supported on switches running Cisco IOS Release 12.1(14)EA1 or later. If you are installing a new switch, refer to the Cisco IOS release label on the rear panel of the switch to determine the release. For quick setup instructions for switches
  • Cisco 3750-48PS | Hardware Installation Guide - Page 30
    the items shown in Figure 1-1 from the shipping container. Figure 1-1 Catalyst 3750 Switch and AC Power Cord 1 SYST RPS MASTR STAT 1X DUPLX SPEED STACK MODE 2X 11X 13X 12X 14X 23X Catalyst 3750 SERIES 24X 97175 2 1 Switch 2 AC power cord You also need to provide an Ethernet (Category
  • Cisco 3750-48PS | Hardware Installation Guide - Page 31
    the switch rear panel, as shown in Figure 1-3. Figure 1-3 Connecting the Power 1 STACK 1 STACK 2 CONSOLE 1.2A-100R>06A-A2T4,IN05GV0-~60 HZ DSCPIENPCPO+IUWF1T2IEESvDRFISO@NUR1MP3RPAAELNYMUOATLE 97176 1 Switch 2 2 AC power cord 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide 1-3
  • Cisco 3750-48PS | Hardware Installation Guide - Page 32
    Chapter 1 Using Express Setup Step 2 Connect the other end of the power cable to a grounded AC outlet. After the switch powers on, it begins the power-on self-test (POST), a series of tests that run automatically to ensure that the switch functions properly. POST lasts approximately 1 minute. When
  • Cisco 3750-48PS | Hardware Installation Guide - Page 33
    takes approximately 3 seconds. Figure 1-4 Starting Express Setup SYST RPS MASTR STAT DUPLX SPEED STACK MODE 97173 1 1 Mode button Step 3 Release the Mode button. Note If all the front panel of the switch, as shown in Figure 1-5. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide 1-5
  • Cisco 3750-48PS | Hardware Installation Guide - Page 34
    DUPLX SPEED STACK MODE 2X 11X 13X 12X 14X 23X Catalyst 3750 SERIES 24X 2 97174 3 1 Switch 2 Ethernet cable 3 PC or workstation Step 5 Step 6 Step 7 Connect the other end of the as shown in Figure 1-6, and press Enter. Catalyst 3750 Switch Hardware Installation Guide 1-6 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 35
    home page does not appear in your browser: • Did you wait 30 seconds after connecting the switch and PC or workstation before entering the IP address in your browser? If not, wait 30 seconds there an error message displayed in the browser window? Catalyst 3750 Switch Hardware Installation Guide 1-7
  • Cisco 3750-48PS | Hardware Installation Guide - Page 36
    and the Ethernet port of the PC or workstation, as shown Figure 1-5. Note See Figure B-11 on page B-9 for instructions on identifying a crossover cable. Note On switches running Cisco IOS Release 12.1(14)EA1 or later, you can use the mdix auto command in the CLI to enable the automatic crossover
  • Cisco 3750-48PS | Hardware Installation Guide - Page 37
    system contact in the System Contact field. This identifies the system administrator for the switch or network. (Optional) Enter your system location in the System Location field. This identifies the physical location of the switch. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide 1-9
  • Cisco 3750-48PS | Hardware Installation Guide - Page 38
    on your switch: Step 1 Step 2 Launch a web browser on a PC or workstation that is connected the network. Enter the IP address of your switch (for example: 172.20.139.142.) The switch home page appears, as shown in Figure 1-8. 1-10 Catalyst 3750 Switch Hardware Installation Guide 78-15136
  • Cisco 3750-48PS | Hardware Installation Guide - Page 39
    you have entered a wrong IP address or need to change the IP address of your switch, you can clear the IP address on your switch by following the steps in the "Clearing the Switch IP Address and Configuration" section on page 4-2. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide 1-11
  • Cisco 3750-48PS | Hardware Installation Guide - Page 40
    , refer to the switch software configuration guide For CMS requirements, see Appendix C, "Managing the Switch by Using the Cluster Management Suite." • Tools-Access diagnostic and monitoring tools such as Telnet and Extended Ping. • Help Resources-Access Catalyst 3750 documentation. Installing
  • Cisco 3750-48PS | Hardware Installation Guide - Page 41
    to which you can connect devices like Cisco IP Phones, Cisco Wireless Access Points workstations, and other network devices such as servers, routers, and other switches. This chapter provides a functional overview of the Catalyst 3750 switch models. These topics are included: • Features, page
  • Cisco 3750-48PS | Hardware Installation Guide - Page 42
    are hot-swappable • Power redundancy - Connection for optional Cisco RPS 300 redundant power system that operates on AC input and supplies backup DC power output to the Catalyst 3750-24TS, 3750G-24T, 3750-48TS, and 3750G-12S switches. Catalyst 3750 Switch Hardware Installation Guide 2-2 78-15136
  • Cisco 3750-48PS | Hardware Installation Guide - Page 43
    Description Note The Cisco RPS 300 does not support the Catalyst 3750G-24TS switch. - Connection for optional Cisco RPS 675 redundant power system that operates on AC input and supplies backup DC power output to the family of Catalyst 3750 switches. Front Panel Description The Catalyst 3750-24TS 10
  • Cisco 3750-48PS | Hardware Installation Guide - Page 44
    23 24 23X 14X 24X Catalyst 3750 SERIES 25 26 27 28 1 2 1 10/100 ports 2 SFP module ports The Catalyst 3750G-12S SFP module slots are numbered 1 through 12. The ports are grouped in three sets of four, as shown in Figure 2-4. Catalyst 3750 Switch Hardware Installation Guide 2-4 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 45
    RPS MASTR STAT DUPLX SPEED STACK MODE 1 2 3 4 5 6 7 8 9 10 Catalyst 3750 SERIES 11 12 1 1 SFP module ports The Catalyst 3750-48TS 10/100 ports are numbered Catalyst 3750 SERIES 1 3 2 4 1 2 1 10/100 ports 2 SFP module ports 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide 2-5
  • Cisco 3750-48PS | Hardware Installation Guide - Page 46
    of device on the other end of the connection. The automatic crossover feature is disabled by default. For configuration information for this feature, refer to the switch software configuration guide or the switch command reference. Catalyst 3750 Switch Hardware Installation Guide 2-6 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 47
    module slots support the SFP modules listed in the Catalyst 3750 release notes. SFP Modules The Catalyst 3750 switch uses Gigabit with RJ-45 connectors to connect to a copper SFP module. The Catalyst 3750 models support these Cisco SFP options: • 1000BASE-LX • 1000BASE-SX • 1000BASE-T For more
  • Cisco 3750-48PS | Hardware Installation Guide - Page 48
    are visible on the Cluster Management Suite (CMS) home page. The switch software guide describes how to use CMS to configure and monitor individual switches and switch clusters. Figure 2-6 Catalyst 3750 LEDs SYST RPS MASTR STAT DUPLX SPEED STACK MODE 12345678 9 12 1X 34 56 78 9 10 11 12 11X
  • Cisco 3750-48PS | Hardware Installation Guide - Page 49
    should turn green. If it does not, the RPS fan could have failed. Contact Cisco Systems. The internal power supply in a switch has failed, and the RPS is providing power to the switch (redundancy has been allocated to this device). 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide 2-9
  • Cisco 3750-48PS | Hardware Installation Guide - Page 50
    System Hardware Installation Guide. For more information about the Cisco RPS 675, refer to the Cisco RPS 675 Redundant Power System Hardware Installation Guide. Note The Cisco RPS 300 does not support the Catalyst 3750G-24TS switches. Master LED The Master LED shows the stack master status. Table
  • Cisco 3750-48PS | Hardware Installation Guide - Page 51
    SPEED STACK Port speed Stack Member Status switch for possible loops. Flashing amber Port is blocked by STP and is transmitting or receiving packets. Off Port is operating in half duplex. Green Port is operating in full duplex. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide
  • Cisco 3750-48PS | Hardware Installation Guide - Page 52
    ports (on the switch rear panel) are up, and the representative stack LEDs are amber when the ports are down: • SFP port LEDs 1 and 2 on the Catalyst 3750-24TS switch show the status for StackWise ports 1 and 2, respectively. 2-12 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 53
    48 47X Catalyst 3750 SERIES 1 2 3 48X 4 7 47 48 8 9 Catalyst 3750 SERIES 47X 1 2 3 48X 4 47 48 47X Catalyst 3750 SERIES 1 2 10 3 48X 4 11 12 13 1 2 3 86686 1 Stack member 8 2 Stack member 3 3 Stack member 4 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide 2-13
  • Cisco 3750-48PS | Hardware Installation Guide - Page 54
    Rear Panel Description The switch rear panels have an AC power connector, an RPS connector, an RJ-45 console port, and two StackWise ports. (See Figure 2-8 and Figure 2-9.) Figure 2-8 Catalyst 3750-24TS, 3750G-24T, 3750G-12S, and 3750-48TS Rear Panel 86548 STACK 1 STACK 2 CONSOLE 1.6A-100R>09A
  • Cisco 3750-48PS | Hardware Installation Guide - Page 55
    to other nonapproved Cisco cables or equipment. You can order these StackWise cables from your Cisco sales representative: • CAB-STACK-50CM= (0.5-meter cable) • CAB-STACK-1M= (1-meter cable) • CAB-STACK-3M= (3-meter cable) 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide 2-15
  • Cisco 3750-48PS | Hardware Installation Guide - Page 56
    the supplied AC power cord to connect the AC power connector to an AC power outlet. Cisco RPS Connector Specific Cisco RPS modes support specific Catalyst 3750 switches: • Cisco RPS 300 (model PWR300-AC-RPS-N1) supports the Catalyst 3750-24TS, 3750G-24T, 3750G-12S, and 3750-48TS switches. • Cisco
  • Cisco 3750-48PS | Hardware Installation Guide - Page 57
    -45-to-DB-25 female DTE adapter. You can order a kit (part number ACS-DSBUASYN=) containing that adapter from Cisco. For console port and adapter pinout information, see the "Connector and Cable Specifications" section on page B-1. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide 2-17
  • Cisco 3750-48PS | Hardware Installation Guide - Page 58
    is required. From CMS, you can fully configure and monitor a switch or switch clusters, display network topologies to gather link information, and display switch images to modify switch- and port-level settings. For more information, refer to the switch software configuration guide on Cisco.com
  • Cisco 3750-48PS | Hardware Installation Guide - Page 59
    and configuration updates by generating switch-specific configuration changes, sending them to the switch, executing the configuration change, and logging the results. Network Configurations Refer to the switch software configuration guide on Cisco.com for network configuration concepts
  • Cisco 3750-48PS | Hardware Installation Guide - Page 60
    Management Options Chapter 2 Product Overview 2-20 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 61
    how to start your switch and how to interpret the power-on self-test (POST) that ensures proper operation. It describes the planning and cabling considerations to keep in mind while planning your stack. It describes how to install the switch and make connections to the switch. Read the topics and
  • Cisco 3750-48PS | Hardware Installation Guide - Page 62
    Do not stack the chassis on any other equipment. If the chassis falls, it can cause severe bodily injury and equipment damage. Warning The plug-socket combination must be accessible at all times because it serves as the main disconnecting device. Catalyst 3750 Switch Hardware Installation Guide
  • Cisco 3750-48PS | Hardware Installation Guide - Page 63
    product should be handled according to all national laws and regulations. Warning Attach only the Cisco RPS (model PWR675-AC-RPS-N1) to the RPS receptacle. Warning Class 1 laser product Warning Avoid exposure to the laser beam. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide 3-3
  • Cisco 3750-48PS | Hardware Installation Guide - Page 64
    specific regulatory statements about the Catalyst 3750 family of switches. U.S.A. U.S. regulatory information for this product is in the front matter of this manual such trouble occurs, the user may be required to take corrective actions. 46464 Catalyst 3750 Switch Hardware Installation Guide 3-4
  • Cisco 3750-48PS | Hardware Installation Guide - Page 65
    according to the Hungarian EMC Class A requirements (MSZEN55022). Class A equipment is designed for typical commercial establishments for which special conditions of installation and protection distance are used. Statement 256 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide 3-5
  • Cisco 3750-48PS | Hardware Installation Guide - Page 66
    is within the ranges listed in Appendix A, "Technical Specifications." • Clearance to front and rear panels is such that - Front-panel indicators can be easily read. - Access to ports is sufficient for unrestricted cabling. Catalyst 3750 Switch Hardware Installation Guide 3-6 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 67
    your Cisco representative or reseller for support. Return all packing material to the shipping container, and save it. The switch is shipped with these items: • This Catalyst 3750 Switch Hardware Installation Guide • About the Catalyst 3750 Documentation flyer • AC power cord (AC-powered switches
  • Cisco 3750-48PS | Hardware Installation Guide - Page 68
    brackets to the switch (Catalyst 3750-24TS, 3750G-24T, and 3750-48TS switches) - Four Phillips machine screws for attaching the brackets to a rack - One cable guide and one black Phillips machine screw for attaching the cable guide to one of the mounting brackets - One redundant power system (RPS
  • Cisco 3750-48PS | Hardware Installation Guide - Page 69
    have gained access to the switch, you can change the console baud rate through the Administration > Console Baud Rate window in the Cluster Management Suite (CMS). Using the supplied RJ-45-to-DB-9 adapter are using a PC or terminal. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide 3-9
  • Cisco 3750-48PS | Hardware Installation Guide - Page 70
    management station. See the "Connecting a PC or Terminal to the Console Port" section on page 3-8 for information on connecting to the switch console port. Connect one end of the AC power cord to the AC power connector on the switch. Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 71
    you are installing the Catalyst 3750-24TS, 3750G-24T, 3750G-24T, 3750G-12S, or 3750-48TS switches, you can use the Cisco RPS 675. Warning Attach only the Cisco RPS 675 (model PWR675-AC-RPS-N1=) to the RPS receptacle As the switch powers on, it begins POST, a series of tests that run automatically
  • Cisco 3750-48PS | Hardware Installation Guide - Page 72
    : • Size of the switch. For switch dimensions, go to Appendix A, "Technical Specifications." The Catalyst 3750-24TS, 3750G-24TS, and 3750-48TS switches are the same depth, and the Catalyst 3750G-12S and 3750G-24T switches are deeper than the other switches. Stacking switches of the same size
  • Cisco 3750-48PS | Hardware Installation Guide - Page 73
    • Power off a switch before you add it to or remove it from an existing switch stack. Note For conditions that can cause a stack master re-election or to manually elect the stack master, refer to the "Managing Switch Stacks" chapter in the switch software configuration guide. 78-15136-02 Catalyst
  • Cisco 3750-48PS | Hardware Installation Guide - Page 74
    in link B; therefore, this stack provides only half bandwidth and does not have redundant connections. In Figure 3-5 link B is bad; therefore, this stack partitions into two stacks with switch 1 and switch 3 being stack masters. 3-14 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 75
    Figure 3-6 is an example of a recommended configuration using the supplied 0.5-meter StackWise cable. In this example, the switches are stacked in a vertical rack or on a table. This configuration provides redundant connections. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide 3-15
  • Cisco 3750-48PS | Hardware Installation Guide - Page 76
    to the supplied 0.5-meter StackWise cable. This configuration also provides redundant connections. Figure 3-7 Stacking the Catalyst 3750 Switches in a Vertical Rack or on a Table Using 0.5-meter and 3-meter StackWise Cables 86585 3-16 Catalyst 3750 Switch Hardware Installation Guide 78-15136
  • Cisco 3750-48PS | Hardware Installation Guide - Page 77
    86825 Figure 3-9 Stacking Nine Switches in a Side-by-Side Mounting Configuration 90532 Installing the Switch This section describes these installation procedures: • Rack Mounting, page 3-18 • Wall Mounting, page 3-32 • Table or Shelf Mounting, page 3-36 78-15136-02 Catalyst 3750 Switch Hardware
  • Cisco 3750-48PS | Hardware Installation Guide - Page 78
    or servicing the unit in the rack. To install the switch in a 19-inch or 24-inch rack (24-inch racks require optional mounting hardware), follow the instructions described in these procedures: • Removing Screws from the Switch, page 3-19 • Attaching Brackets to the Catalyst 3750G-24TS Switch, page
  • Cisco 3750-48PS | Hardware Installation Guide - Page 79
    3750-24TS, 3750G-24T, and 3750-48TS Switches 86819 16 17 18 19 20 21 22 23 24 23X Catalyst 3750 SERIES 1 24X 2 Figure 3-11 Removing Screws from the Catalyst 3750G-12S Switch 97170 16 8 9 10 Catalyst 3750 SERIES 11 12 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide 3-19
  • Cisco 3750-48PS | Hardware Installation Guide - Page 80
    Figure 3-12 shows how to remove the chassis screws in a 1.5-RU switch. Figure 3-12 Removing Screws from the 3750G-24TS Switch 86820 23 24 23X 24X Catalyst 3750 SERIES 25 26 27 28 Attaching Brackets to the Catalyst 3750G-24TS Switch The bracket orientation and the brackets that you use depend on
  • Cisco 3750-48PS | Hardware Installation Guide - Page 81
    Brackets for 19-inch Racks, Front Panel Forward 1 Installing the Switch SYST RPS MASTR STAT DUPLX SPEED STACK MODE 1 Phillips flat-head screws 12 1X 34 56 78 9 10 11 12 11X 2X 12X 13 14 15 16 13X 17 14X 86839 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide 3-21
  • Cisco 3750-48PS | Hardware Installation Guide - Page 82
    the Switch Chapter 3 Switch Installation Figure 3-14 Attaching Brackets for 24-Inch Racks, Front Panel Forward 1 SYST RPS MASTR STAT DUPLX SPEED STACK MODE 1 Phillips flat-head screws 12 1X 34 56 78 9 10 11 12 11X 2X 12X 86557 3-22 Catalyst 3750 Switch Hardware Installation Guide 78
  • Cisco 3750-48PS | Hardware Installation Guide - Page 83
    Brackets for 19-Inch Racks, Rear Panel Forward Installing the Switch 86555 DSCPIENPCPO+IUWF1TI2EESvDRFISO@NUR1MP7RPAaELNYMUOATLE 1 1 Phillips flat-head screws Figure @NUR1MP7RPAaELNYMUOATLE 1 Phillips flat-head screws 78-15136-02 1 86556 Catalyst 3750 Switch Hardware Installation Guide 3-23
  • Cisco 3750-48PS | Hardware Installation Guide - Page 84
    Figure 3-18 Attaching Brackets for 24-Inch Telco Racks 13 14 13X 15 16 17 18 19 20 21 22 23 24 23X 14X 24X Catalyst 3750 SERIES 25 26 27 28 1 Phillips flat-head screws Chapter 3 Switch Installation 1 1 86558 86559 3-24 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 85
    Installation Installing the Switch Attaching Brackets to the Catalyst 3750-24TS, 3750G-24T, 3750G-12S, and 3750-48TS Switches The bracket STACK MODE 1 Phillips flat-head screws 12 1X 34 56 78 9 10 11 12 11X 2X 12X 86560 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide
  • Cisco 3750-48PS | Hardware Installation Guide - Page 86
    Installing the Switch Chapter 3 Switch Installation Figure 3-20 Attaching Brackets for 24-Inch Racks, Front Panel Forward 1 86561 SYST RPS MASTR STAT DUPLX SPEED STACK MODE 1 Phillips flat 1 1 Phillips flat-head screws 86562 3-26 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 87
    for 19-Inch Telco Racks to Catalyst 3750-24TS, 3750G-24T, and 3750-48TS Switches 9 10 11 12 11X 12X 13 14 13X 15 16 17 18 19 20 21 22 23 24 23X 14X 24X Catalyst 3750 SERIES 1 2 1 1 Phillips flat-head screws 86564 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide 3-27
  • Cisco 3750-48PS | Hardware Installation Guide - Page 88
    13X 15 16 17 18 19 20 21 22 23 24 23X 14X 24X Catalyst 3750 SERIES 1 2 1 86840 1 Phillips flat-head screws Mounting the Switch in a Rack After the brackets are attached to the switch, use the four supplied number-12 Phillips machine screws to securely attach the brackets to the rack, as
  • Cisco 3750-48PS | Hardware Installation Guide - Page 89
    21 22 23 24 23X 14X 24X Catalyst 3750 SERIES 25 26 27 28 86566 1 Phillips machine screws Figure 3-27 Mounting the Catalyst 3750-24TS, 3750G-24T, 3750G-12S, and 3750-48TS Switches in a Rack SYST RPS MASTR STAT DUPLX SPYESETD SRTPASCK MODE MASTR STAT DUPLX SPEED STACK MODE 1 1 12 1X 12 1X 2X
  • Cisco 3750-48PS | Hardware Installation Guide - Page 90
    the cables from obscuring the front panel of the switch and the other devices installed in the rack. Use the supplied black screw, as shown in Figure 3-28 and Figure 3-29 to attach the cable guide to the left or right bracket. 3-30 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 91
    3750 SERIES 25 26 1 Cable guide screws Note The Catalyst 3750-48 switch ships with a special cable guide, as shown in Figure 3-29. This cable guide secures up to 48 cables. Use the supplied black screw to mount it on the left bracket. Figure 3-29 Attaching the Cable Guide on the Catalyst 3750-48TS
  • Cisco 3750-48PS | Hardware Installation Guide - Page 92
    side of the switch. Follow the same steps to attach the second bracket to the opposite side. Figure 3-30 Attaching the 19-inch Brackets for Wall-Mounting 23 24 23X 24X Catalyst 3750 SERIES 25 26 27 28 1 Phillips truss-head screws 3-32 Catalyst 3750 Switch Hardware Installation Guide 1 78-15136
  • Cisco 3750-48PS | Hardware Installation Guide - Page 93
    the RPS Connector Cover on the Catalyst 3750G-24TS Switch 86571 STACK 1 STACK 2 CONSOLE [email protected] 1 2 3 1 Phillips pan-head screws 3 RPS connector 2 RPS connector cover 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide 3-33
  • Cisco 3750-48PS | Hardware Installation Guide - Page 94
    Installation Figure 3-32 Attaching the RPS Connector Cover on the Catalyst 3750G-12S, 3750-24TS, 3750G-24T, and the 3750-48TS Switches STACK 1 STACK 2 CONSOLE 1.6A-100R>09A-A2T0,IN05GV0-~60 HZ [email protected] 1 2 3 1 Phillips pan-head screws 3 RPS
  • Cisco 3750-48PS | Hardware Installation Guide - Page 95
    "Starting the Terminal Emulation Software" section on page 1-6. • Power on the switch. See the "Connecting to a Power Source" section on page 1-6. If the switches are stacked, see the "Powering Considerations" section on page 3-13. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide 3-35
  • Cisco 3750-48PS | Hardware Installation Guide - Page 96
    " section on page 1-6. • Power on the switch. See the "Connecting to a Power Source" section on page 1-6. If the switches are stacked, see the "Powering Considerations" section on page 3-13 page 3-46 to complete the installation. 3-36 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 97
    the StackWise cable can shorten its useful life. Do not remove and insert the cable more often than is absolutely necessary. Note When the connectors are not being used, replace the dust covers on them to protect them from dust. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide 3-37
  • Cisco 3750-48PS | Hardware Installation Guide - Page 98
    Figure 3-34 Inserting the StackWise Cable in a StackWise Port Chapter 3 Switch Installation STACK 1 STACK 2 CONSOLE 86549 When you need to remove the StackWise cable from the and Figure 3-36 for incorrect removal procedures. 3-38 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 99
    Chapter 3 Switch Installation Connecting StackWise Cable to StackWise Ports Figure 3-35 Correct Removal of the StackWise Cable from a StackWise Port STACK 1 STACK 2 CONSOLE 86826 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide 3-39
  • Cisco 3750-48PS | Hardware Installation Guide - Page 100
    on the Catalyst 3750 switch. Each SFP module has an internal serial EEPROM that is encoded with security information. This encoding provides a way for Cisco to identify and validate that the SFP module meets the requirements for the switch. 3-40 Catalyst 3750 Switch Hardware Installation Guide 78
  • Cisco 3750-48PS | Hardware Installation Guide - Page 101
    3 Switch Installation Installing and Removing SFP Modules For detailed instructions on SFP module. Removing and installing an SFP module can shorten its useful life. Do not remove and insert SFP modules more often than is absolutely 15136-02 Catalyst 3750 Switch Hardware Installation Guide 3-41
  • Cisco 3750-48PS | Hardware Installation Guide - Page 102
    38 Installing an SFP Module into an SFP Module Slot 13 13X 5 6 7 14X 8 9 10 Catalyst 3750 SERIES 11 12 97169 Step 5 For fiber-optic SFP modules, remove the dust plugs from the optical ports from contamination and ambient light. 3-42 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 103
    Chapter 3 Switch Installation Installing and Removing SFP Modules Step 6 Insert the cable connector into the SFP module: • For fiber- a small, flat-blade screwdriver or other long, narrow instrument to open the bale-clasp latch. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide 3-43
  • Cisco 3750-48PS | Hardware Installation Guide - Page 104
    Switch Installation Figure 3-39 Removing a Bale-Clasp Latch SFP Module by Using a Flat-Blade Screwdriver 86554 13 13X 14 15 16 17 18 19 20 21 22 23 24 23X 14X 24X Catalyst 3750 SERIES manually ends of the connection. 3-44 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 105
    Specifications" section on page B-6 for cable-pinout descriptions.) Note When connecting to 1000BASE-T-compatible devices, be sure to use a twisted four-pair, Category 5 cable. Note On switches running Cisco at the other end 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide 3-45
  • Cisco 3750-48PS | Hardware Installation Guide - Page 106
    on how to connect to 1000BASE-T SFP modules, see the "Connecting to 1000BASE-T SFP Modules" section. For instructions about how to install or remove an SFP module, see the "Installing and Removing SFP Modules" section on page 3-40. 3-46 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 107
    See Appendix B, "Connector and Cable Specifications" for information about the LC on problem, or there might be problem with the adapter installed in the target device. See Chapter 4, "Troubleshooting," for solutions to cabling problems. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide
  • Cisco 3750-48PS | Hardware Installation Guide - Page 108
    23X 114X 24X 2 Catalyst 3750 SERIES 1 2 1 1 LC connector Step 5 If necessary, reconfigure and restart the switch or target device. Caution For detailed instructions on removing the board and component handling procedures. 3-48 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 109
    be a cable problem, or there might be problem with the adapter installed in the target device. See Chapter 4, "Troubleshooting," for solutions to cabling problems. If necessary, reconfigure and restart the switch or target device. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide 3-49
  • Cisco 3750-48PS | Hardware Installation Guide - Page 110
    as an individual switch from the console. Refer to the Catalyst 3750 Switch Command Reference on Cisco.com for information on using the CLI with a Catalyst 3750 switch. • Start an SNMP application such as the CiscoView application. 3-50 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 111
    chapter describes these topics for troubleshooting problems: • Understanding POST Results, page 4-1 • Clearing the Switch IP Address and Configuration, page 4-2 • Replacing a Failed Stack Member, page 4-7 Understanding POST Results As the switch powers on, it begins POST, a series of tests that run
  • Cisco 3750-48PS | Hardware Installation Guide - Page 112
    reconfigure the switch. To clear the IP address and the switch configuration information, follow these steps: Step 1 Press and hold the Mode button, as shown in Figure 1-4 on page 1-5. The switch LEDs begin blinking after about 2 seconds. Catalyst 3750 Switch Hardware Installation Guide 4-2 78
  • Cisco 3750-48PS | Hardware Installation Guide - Page 113
    Information" section on page D-10 Diagnosing Problems Common switch problems fall into these categories: • Poor performance • No connectivity • Corrupted software Table 4-1 describes how to detect and resolve these problems. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide 4-3
  • Cisco 3750-48PS | Hardware Installation Guide - Page 114
    Diagnosing Problems Chapter 4 Troubleshooting Table 4-1 Common Problems and Solutions Symptom Poor performance or excessive errors Possible Cause Duplex diagnostic utility. • Wait 30 seconds for the port LED to turn green. Catalyst 3750 Switch Hardware Installation Guide 4-4 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 115
    Chapter 4 Troubleshooting Diagnosing Problems Table 4-1 Common Problems and Solutions (continued) Symptom No connectivity Possible Cause Incorrect or bad cable These are results of no link at both ends: • A crossover cable was used when a straight-through was required, or vice-versa. Resolution
  • Cisco 3750-48PS | Hardware Installation Guide - Page 116
    Problems Chapter 4 Troubleshooting Table 4-1 Common Problems and Solutions (continued) Symptom The switch port is placed in error-disabled state after SFP is inserted Switch does not recognize the SFP module No stack link between switches or high error rate between switches in the stack
  • Cisco 3750-48PS | Hardware Installation Guide - Page 117
    as the failed switch. Power down the failed switch. Make sure the replacement switch is powered off, and then connect the replacement switch to the stack. Note If you had manually set the member numbers for any members in the stack, you need to manually assign the replacement switch the same member
  • Cisco 3750-48PS | Hardware Installation Guide - Page 118
    Replacing a Failed Stack Member Chapter 4 Troubleshooting Catalyst 3750 Switch Hardware Installation Guide 4-8 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 119
    A-1 Specifications for the Catalyst 3750G-12S Switch Environmental Ranges Operating temperature Storage temperature Relative humidity Operating altitude Storage altitude Power Requirements AC input voltage DC input voltages for RPS 300 DC input voltages for RPS 675 Power consumption Power rating
  • Cisco 3750-48PS | Hardware Installation Guide - Page 120
    Weight 10 lb (4.55 kg) Dimensions (H x D x W) 1.73 x 12.83 x 17.5 in. (4.39 x 32.59 x 44.45 cm) Table A-2 Specifications for the Catalyst 3750-24TS Switch Environmental Ranges Operating temperature Storage temperature Relative humidity Operating altitude Storage altitude Power Requirements
  • Cisco 3750-48PS | Hardware Installation Guide - Page 121
    DC input voltages for RPS 675 +12V @13A Power consumption 165W, 563 BTUs per hour Power rating 0.165 kVA Physical Dimensions Weight 10 lb (4.55 kg) Dimensions (H x D x W) 1.73 x 12.83 x 17.5 in. (4.39 x 32.59 x 44.45 cm) 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide A-3
  • Cisco 3750-48PS | Hardware Installation Guide - Page 122
    675 +12V @17A Power consumption 190W, 650 BTUs per hour Power rating 0.190 kVA Physical Dimensions Weight 12.5 lb (5.68 kg) Dimensions (H x D x W) 2.59 x 11.60 x 17.5 in. (6.59 x 29.46 x 44.45 cm) Table A-5 Specifications for the Catalyst 3750-48TS Switch Environmental Ranges Operating
  • Cisco 3750-48PS | Hardware Installation Guide - Page 123
    Technical Specifications Table A-5 Specifications for the Catalyst 3750-48TS Switch (continued) Environmental Ranges DC input voltages for RPS 300 [email protected] DC input voltages for RPS 675 +12V @8.5A Power consumption 75W, 256 BTUs per hour Power rating 0.075 kVA Physical Dimensions Weight
  • Cisco 3750-48PS | Hardware Installation Guide - Page 124
    Appendix A Technical Specifications Catalyst 3750 Switch Hardware Installation Guide A-6 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 125
    to other devices. Connector Specifications These sections describe the connectors used with the Catalyst 3750 switches. 10/100/1000 Ports The 10/100/1000 Ethernet ports on Catalyst 3750 switches use standard RJ-45 connectors. Figure B-1 shows the pinout. Note On switches running Cisco IOS Release 12
  • Cisco 3750-48PS | Hardware Installation Guide - Page 126
    Appendix B Connector and Cable Specifications Connecting to 10BASE-T- and 100BASE-TX-Compatible Devices When connecting the ports to 10BASE-T- and ports when both ports are designated with an X or when both ports do not have an X. Catalyst 3750 Switch Hardware Installation Guide B-2 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 127
    the switch, regardless the type of device on the other end of the connection. The automatic crossover feature is disabled by default. For configuration information for this feature, refer to the switch software configuration guide or the switch command reference. 78-15136-02 Catalyst 3750 Switch
  • Cisco 3750-48PS | Hardware Installation Guide - Page 128
    Appendix B Connector and Cable Specifications When connecting 10/100 ports to compatible devices such as servers, workstations, Port Pinouts Pin Label 1 RD+ 2 RD- 3 TD+ 4 NC 5 NC 6 TD- 7 NC 8 NC 12345678 H5318 Catalyst 3750 Switch Hardware Installation Guide B-4 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 129
    Specifications Connector Specifications SFP Module Ports The Catalyst 3750 switch uses SFP modules for fiber-optic and copper uplink ports. Refer to the Catalyst 3750 release notes for a list of supported - 7 TP3+ 8 TP3- 60915 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide B-5
  • Cisco 3750-48PS | Hardware Installation Guide - Page 130
    number ACS-DSBUASYN=) containing that adapter from Cisco. For console port and adapter pinout information, see Table B-1 and Table B-2. Cable and Adapter Specifications These sections describe the cables and adapters used with Catalyst 3750 switches. Two Twisted-Pair Cable Pinouts Figure B-5 and
  • Cisco 3750-48PS | Hardware Installation Guide - Page 131
    7 NC 8 NC 4 NC 5 NC 7 NC 8 NC 65271 Figure B-8 Four Twisted-Pair Crossover Cable Schematic for 10/100 Ports MT 10/100 1 RD+ 2 RD3 TD+ 6 TD- Switch/Hub 1 RD+ 2 RD3 TD+ 6 TD- 4 NC 5 NC 7 NC 8 NC 4 NC 5 NC 7 NC 8 NC 65273 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide B-7
  • Cisco 3750-48PS | Hardware Installation Guide - Page 132
    Cable and Adapter Specifications Appendix B Connector and Cable Specifications Four Twisted-Pair Cable Pinouts for 1000BASE-T Ports Figure B-9 and Figure B-10 show the schematics of four twisted-pair cables for 10/100/1000 ports on Catalyst 3750 switches. Figure B-9 Four Twisted-Pair Straight-
  • Cisco 3750-48PS | Hardware Installation Guide - Page 133
    the switch, regardless the type of device on the other end of the connection. The automatic crossover feature is disabled by default. For configuration information for this feature, refer to the switch software configuration guide or the switch command reference. 78-15136-02 Catalyst 3750 Switch
  • Cisco 3750-48PS | Hardware Installation Guide - Page 134
    ACS-DSBUASYN=) containing this adapter from Cisco. Table B-2 Console Port Signaling Using a DB-25 Adapter Switch Console Port (DTE) Signal RTS DTR RJ-45-to-DB-25 Terminal Adapter DB-25 Pin 5 6 Console Device Signal CTS DSR B-10 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 135
    and Adapter Specifications Table B-2 Console Port Signaling Using a DB-25 Adapter (continued) Switch Console Port (DTE) Signal TxD GND GND RxD DSR CTS RJ-45-to-DB-25 Terminal Adapter DB-25 Pin 3 7 7 2 20 4 Console Device Signal RxD GND GND TxD DTR RTS 78-15136-02 Catalyst 3750 Switch Hardware
  • Cisco 3750-48PS | Hardware Installation Guide - Page 136
    Cable and Adapter Specifications Appendix B Connector and Cable Specifications B-12 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 137
    the switch. Note If you have downloaded a new version of CMS, you must clear your browser cache before launching the new version. When you clear the cache, all the jar_cache*.tmp CMS files are removed from the temporary directory. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide C-1
  • Cisco 3750-48PS | Hardware Installation Guide - Page 138
    14X 24X 13X 23X 14X 13 14 13X 15 16 17 18 19 20 21 22 24X 23 24 23X 14X 24X Catalyst 3750 SERIES Catalyst 3750 SERIES Catalyst 3750 SERIES 3 86832 2 1 Catalyst 3750 switches 2 PC 3 Category 5 straight-through cable Catalyst 3750 Switch Hardware Installation Guide C-2 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 139
    username and password when prompted. If no username is configured on your switch (the default), enter only the enable password in the password field. The switch home page appears, as shown in Figure C-2. Figure C-2 Switch Home Page 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide C-3
  • Cisco 3750-48PS | Hardware Installation Guide - Page 140
    , as shown in Figure C-3. Figure C-3 CMS Setup Report The CMS Setup Report has links that instruct you how to configure your PC or workstation to run CMS. When your PC or workstation is CMS, you do not see the CMS Setup Report. Catalyst 3750 Switch Hardware Installation Guide C-4 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 141
    For more information about the CMS, refer to the software configuration guide or to the online help. CMS Requirements These sections list the recommended platform configurations and supported operating systems, web browsers, and Java plug-ins for running CMS: • Operating System and Browser
  • Cisco 3750-48PS | Hardware Installation Guide - Page 142
    333 MHz 1. Service Pack 3 or higher is required. DRAM 128 MB Support You can access CMS by using the operating systems and browsers listed in Table C-2. CMS checks the browser version when starting a session to ensure that the browser is supported. Catalyst 3750 Switch Hardware Installation Guide
  • Cisco 3750-48PS | Hardware Installation Guide - Page 143
    ://www.cisco.com/pcgi-bin/tablebuild.pl/java Note Only one of these Java plug-ins is required for CMS. Do not install more than one. On Solaris platforms, follow the instructions in the README_FIRST.txt file to install the Java plug-in. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide
  • Cisco 3750-48PS | Hardware Installation Guide - Page 144
    Notes These notes apply to the Java plug-in configuration: • To verify that a supported version of the Java plug-in is installed, select Start > Settings > Control Panel refer to the software configuration guide or to the online help. Catalyst 3750 Switch Hardware Installation Guide C-8 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 145
    page D-4 3. Stacking the Switches (Optional), page D-5 4. Connecting to the Console Port, page D-7 5. Starting the Terminal Emulation Software, page D-9 6. Connecting to a Power Source, page D-9 7. Entering the Initial Configuration Information, page D-10 78-15136-02 Catalyst 3750 Switch Hardware
  • Cisco 3750-48PS | Hardware Installation Guide - Page 146
    new switch, refer to the Cisco IOS release label on the rear panel of the switch to determine the release. For switches running releases earlier than Cisco IOS Release switch, save it to Flash memory by using the write memory privileged EXEC command. Catalyst 3750 Switch Hardware Installation Guide
  • Cisco 3750-48PS | Hardware Installation Guide - Page 147
    on your PC or workstation and access the switch through a Telnet session. To access the switch through the console port, follow the steps in the rest of this chapter, beginning with the "Taking Out What You Need" section on page D-4. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide D-3
  • Cisco 3750-48PS | Hardware Installation Guide - Page 148
    , and the StackWise Cable 1 SYST RPS MASTR STAT DUPLX SPEED STACK MODE 12 1X 34 56 78 9 10 11 12 11X 2X 12X 13 14 13X 15 16 17 18 19 20 21 22 23 24 23X 14X 24X Catalyst 3750 SERIES 2 3 4 1 Catalyst 3750 switch 3 AC power cord 2 RJ-45-to-DB-9 adapter cable 4 StackWise cable
  • Cisco 3750-48PS | Hardware Installation Guide - Page 149
    configuration guide or the switch command reference. Stacking the Switches (Optional) You can stack up to nine switches by using the StackWise cables and ports to connect the switches. Read the "Planning the Stack" section on page 3-12 before you stack your switches. Figure D-2 Stacking the Switches
  • Cisco 3750-48PS | Hardware Installation Guide - Page 150
    StackWise Cable to StackWise Ports" section on page 3-37 for detailed installation procedures on how to connect the switches in a stack. Figure D-3 Connecting the StackWise Cable to a StackWise Port STACK 1 STACK 2 CONSOLE 90530 Catalyst 3750 Switch Hardware Installation Guide D-6 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 151
    , connect to the console port of one of the switches in the stack. The initial configuration for the entire stack can be performed on any switch in the stack. Follow these steps to connect the PC or terminal to the switch: Step 1 Step 2 Using the supplied RJ-45-to-DB-9 adapter cable, insert the RJ
  • Cisco 3750-48PS | Hardware Installation Guide - Page 152
    Port Appendix D Quick Setup By Using the CLI-Based Setup Program Figure D-4 Connecting a Switch to a PC 3 CONSOLE CONSOLE CONSOLE 1.6A-100R>09A-A2T0,IN05GV0-~60 HZ 1.6A- 1 Catalyst 3750 switches 2 Power cord 3 RJ-45-to-DB-9 adapter cable Catalyst 3750 Switch Hardware Installation Guide D-8
  • Cisco 3750-48PS | Hardware Installation Guide - Page 153
    end of the supplied AC power cord to the power connector on a switch rear panel. See Figure D-4. Connect the other end of the power cable to a grounded AC outlet. (Optional) If you have a stack, power on all the switches in the stack. Note If you have stacked your switches, refer to the "Powering
  • Cisco 3750-48PS | Hardware Installation Guide - Page 154
    RPS. As the switch powers on, it begins POST, a series of tests that run automatically to ensure that the switch functions properly. If POST fails, see Chapter 4, "Troubleshooting," to determine a course of action. After you have powered all the switches in the stack, a switch is elected as the
  • Cisco 3750-48PS | Hardware Installation Guide - Page 155
    the Setup Program Note If your switches are stacked and there are multiple console connections to individual switches in the stack, the initial setup dialog appears in press Return. Enter enable password: enable_password 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide D-11
  • Cisco 3750-48PS | Hardware Installation Guide - Page 156
    from the above interface summary: vlan1 Step 8 Configure the interface by entering the switch IP address and subnet mask and pressing Return. The IP address and subnet masks 15 password terminal-password no snmp-server ! no ip routing Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 157
    > ! interface GigabitEthernet2/0/28 ! end Step 10 These choices are displayed save the configuration and use it the next time the switch reboots, save it in nonvolatile RAM (NVRAM) by selecting . After you complete the setup program, the switch can run the default configuration that you created.
  • Cisco 3750-48PS | Hardware Installation Guide - Page 158
    use the CLI, enter commands at the Switch> prompt through the console port by switch software configuration guide or the switch command reference. To use the CMS, go to Appendix C, "Managing the Switch by Using the Cluster Management Suite." D-14 Catalyst 3750 Switch Hardware Installation Guide
  • Cisco 3750-48PS | Hardware Installation Guide - Page 159
    -AC-RPS-N1) uniquement au connecteur RPS. Warnung An die RPS-Steckhülse darf nur das Cisco RPS (Modell PWR300-AC-RPS-N1) angeschlossen werden. Avvertenza Collegare soltanto il Cisco RPS (modello PWR300-AC-RPS-N1) alla presa RPS. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide E-1
  • Cisco 3750-48PS | Hardware Installation Guide - Page 160
    the Cisco RPS (model PWR675-AC-RPS-N1) to the RPS receptacle. Waarschuwing Slechts de Cisco RPS (model PWR675-AC-RPS-N1) aan de RPS contactdoos verbinden. Varoitus Kiinnitä RPS-vastakappaleeseen vain Cisco RPS (malli PWR675-AC-RPS-N1). Catalyst 3750 Switch Hardware Installation Guide E-2 78
  • Cisco 3750-48PS | Hardware Installation Guide - Page 161
    o RPS Cisco (modelo PWR675-AC-RPS-N1) apenas ao receptáculo RPS. ¡Advertencia! Sólo conecte el Cisco RPS (modelo PWR675-AC-RPS-N1) al receptáculo RPS. Varning! Koppla endast Ciscos RPS (modell PWR675-AC-RPS-N1) till RPS-uttaget. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide E-3
  • Cisco 3750-48PS | Hardware Installation Guide - Page 162
    and qualified personnel should be allowed to install, replace, or service this equipment. Waarschuwing Deze apparatuur mag alleen worden geïnstalleerd, bör få tillåtelse att installera, byta ut eller reparera denna utrustning. Catalyst 3750 Switch Hardware Installation Guide E-4 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 163
    Safety Warnings Installation Instructions Installation Instructions Warning Read the installation instructions before connecting the system to the power source. Waarschuwing innan du kopplar systemet till strömförsörjningsenheten. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide E-5
  • Cisco 3750-48PS | Hardware Installation Guide - Page 164
    that is connected to power lines, remove jewelry (including rings, necklaces, and watches). Metal objects will heat up when connected to power and ground and can provoquer des blessures graves ou souder l'objet métallique aux bornes. Catalyst 3750 Switch Hardware Installation Guide E-6 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 165
    . Metallobjekt hettas upp när de kopplas ihop med ström och jord och kan förorsaka allvarliga brännskador; metallobjekt kan också sammansvetsas med kontakterna. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide E-7
  • Cisco 3750-48PS | Hardware Installation Guide - Page 166
    the Chassis Warning Appendix E Translated Safety Warnings Stacking the Chassis Warning Warning Do not stack the chassis on any other equipment. If the chassis ällt, besteht Gefahr schwerer Personenverletzungen und Geräteschäden. Catalyst 3750 Switch Hardware Installation Guide E-8 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 167
    Appendix E Translated Safety Warnings Stacking the Chassis Warning Avvertenza Non collocare lo chassis su nessun altro apparecchio. Se utrustning. Om chassit faller kan allvarlig kroppsskada såväl som skada på utrustningen uppstå. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide E-9
  • Cisco 3750-48PS | Hardware Installation Guide - Page 168
    hace las veces de dispositivo de desconexión principal. Varning! Man måste alltid kunna komma åt stickproppen i uttaget, eftersom denna koppling utgör den huvudsakliga frånkopplingsanordningen. E-10 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 169
    alla massa di terra durante il normale utilizzo. Advarsel Dette utstyret skal jordes. Forviss deg om vertsterminalen er jordet ved normalt bruk. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide E-11
  • Cisco 3750-48PS | Hardware Installation Guide - Page 170
    worden gemaakt en het laatste worden losgemaakt. Varoitus Laitetta asennettaessa tai korvattaessa on maahan yhdistäminen aina tehtävä ensiksi ja maadoituksen irti kytkeminen viimeiseksi. E-12 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 171
    al principio y desconéctela al final. Varning! Vid installation eller utbyte av enheten måste jordledningen alltid anslutas först och kopplas bort sist. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide E-13
  • Cisco 3750-48PS | Hardware Installation Guide - Page 172
    Warning Overtemperature Warning Appendix E Translated Safety Warnings Warning To prevent the switch from overheating, do not operate it in an area that exceeds the spazio libero di 7,6 cm intorno alle aperture di ventilazione. E-14 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 173
    maximalt rekommenderade omgivningstemperaturen som är 45°C. Kontrollera att det finns minst 7,6 cm fritt utrymme runt ventilationsöppningarna så att luftflödet inte begränsas. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide E-15
  • Cisco 3750-48PS | Hardware Installation Guide - Page 174
    oppure scollegare i cavi durante un temporale con fulmini. Advarsel Utfør aldri arbeid på systemet, eller koble kabler til eller fra systemet når det tordner eller lyner. E-16 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 175
    dit product dient te geschieden in overeenstemming met alle nationale wetten en reglementen. Varoitus Tämä tuote on hävitettävä kansallisten lakien ja määräysten mukaisesti. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide E-17
  • Cisco 3750-48PS | Hardware Installation Guide - Page 176
    deshacerse por completo de este producto debe seguir todas las leyes y reglamentos nacionales. Varning! Vid deponering hanteras produkten enligt gällande lagar och bestämmelser. E-18 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 177
    If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack. Waarschuwing Om lichamelijk letsel te voorkomen wanneer u dit telineeseen tai sen huoltamista siinä. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide E-19
  • Cisco 3750-48PS | Hardware Installation Guide - Page 178
    Chassis Warning for Rack-Mounting and Servicing Appendix E Translated Safety Warnings Attention Pour éviter toute blessure corporelle pendant átorokat, mielõtt beszerelné az egységet a rackbe, vagy karbantartást végezne rajta. E-20 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 179
    Appendix E Translated Safety Warnings Chassis Warning for Rack-Mounting and Servicing Avvertenza Per evitare infortuni fisici durante il montaggio o la de estabilização, instale-o antes de montar ou reparar a unidade. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide E-21
  • Cisco 3750-48PS | Hardware Installation Guide - Page 180
    Chassis Warning for Rack-Mounting and Servicing Appendix E Translated Safety Warnings ¡Advertencia! Para evitar lesiones durante el montaje skall dessa monteras fast innan enheten installeras eller underhålls på ställningen. E-22 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 181
    Appendix E Translated Safety Warnings • • • • • • • • • Chassis Warning for Rack-Mounting and Servicing 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide E-23
  • Cisco 3750-48PS | Hardware Installation Guide - Page 182
    Connection Warning Appendix E Translated Safety Warnings Redundant Power Supply Connection Warning Warning If a redundant power system (RPS) is not connected to the switch, install an RPS connector cover on the back of the switch. Statement 265 Waarschuwing Als er geen redundant voedingssysteem
  • Cisco 3750-48PS | Hardware Installation Guide - Page 183
    power system, RPS) inte finns anslutet till switchen skall ett RPS-kontaktskydd installeras på switchens baksida. Switch Installation Warning Warning To comply with safety regulations, mount switches panneau frontal vers le haut. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide E-25
  • Cisco 3750-48PS | Hardware Installation Guide - Page 184
    opp. Aviso Para cumprir com os regulamentos de segurança, faça a montagem de switches em uma parede com o painel frontal virado para cima. ¡Advertencia! Para cumplir switcharna monteras på en vägg med frampanelen riktad uppåt. E-26 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 185
    área à qual apenas tem acesso o pessoal de serviço autorizado, que possua uma ferramenta, chave e fechadura especial, ou qualquer outra forma de segurança. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide E-27
  • Cisco 3750-48PS | Hardware Installation Guide - Page 186
    cables must be shielded when used in a central office environment. Waarschuwing Ethernetkabels dienen beveiligd te worden als ze in een centrale kantooromgeving worden gebruikt. E-28 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 187
    deben estar protegidos cuando se usen dentro de una oficina central. Varning! Ethernetkablar måste vara avskärmade vid användning i central kontorsmiljö. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide E-29
  • Cisco 3750-48PS | Hardware Installation Guide - Page 188
    til laserstrålen. Aviso Evite exposição a raios laser. ¡Advertencia! Evite la exposición directa al haz del láser. Varning! Utsätt dig inte för laserstrålning. E-30 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 189
    posible que las fibras desconectadas emitan radiación láser invisible. No fije la vista en los rayos ni examine éstos con instrumentos ópticos. 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide E-31
  • Cisco 3750-48PS | Hardware Installation Guide - Page 190
    Appendix E Translated Safety Warnings Varning! Osynlig laserstrålning kan avges från frånkopplade fibrer eller kontaktdon. Rikta inte blicken in i strålar och titta aldrig direkt på dem med hjälp av optiska instrument. E-32 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 191
    AC power connecting to 3-10 connector 2-16 specifications A-1 guide, attaching 3-30 cable lengths 3-6 cables crossover connecting to B-2 to B-4 four twisted-pair pinout, 10/100 ports B-7 four twisted-pair pinout, 1000BASE-T ports B-8 identifying B-9 Catalyst 3750 Switch Hardware Installation Guide
  • Cisco 3750-48PS | Hardware Installation Guide - Page 192
    and servicing E-19 Cisco IP Phones, connecting to 3-45 Cisco RPS See RPS CiscoView 2-18 CLI 2-18 accessing by using Express Setup D-2 accessing through console port D-3 Cluster Management Suite See CMS CMS 2-18 accessing your switch C-1 operating systems and supported browsers C-6 requirements
  • Cisco 3750-48PS | Hardware Installation Guide - Page 193
    twisted-pair 10/100 ports B-7 D DC power RPS 2-2 to 2-3 diagnosing problems 4-3 dimensions A-2 to A-5 document conventions xvi duplex LED port C-2 connecting to a power source D-9 rack-mounting 3-18 to 3-36 site requirements 3-6 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide IN-3
  • Cisco 3750-48PS | Hardware Installation Guide - Page 194
    2-11 stack 2-12 STATUS 2-11 system 2-9 lightning activity warning E-16 M main disconnecting device warning E-10 methods for accessing the switch D-2 mode list 3-7 PC, connecting to switch 3-9 performance problems, solving 4-3 IN-4 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 195
    running at powerup 1-4 power connecting to 3-10 connectors 2-14, 2-16 specifications A-1 to A-5 power on 3-10 power supply AC power outlet 2-16 RPS power supply See RPS regulatory statements, EMC 3-4 removing SFP modules 3-43 to 3-44 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide
  • Cisco 3750-48PS | Hardware Installation Guide - Page 196
    table-mounting 3-36 technical specifications A-1 telco racks 3-18 Telnet, and accessing the CLI 2-18 temperature, operating A-1 terminal, connecting to switch 3-9 terminal emulation software 3-8, D-9 translated warnings E-1 to E-31 IN-6 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • Cisco 3750-48PS | Hardware Installation Guide - Page 197
    Index troubleshooting 4-1 to 4-5 W wall mounting 3-32 warnings defined xvi installation 3-2 translated E-1 to E-31 78-15136-02 Catalyst 3750 Switch Hardware Installation Guide IN-7
  • Cisco 3750-48PS | Hardware Installation Guide - Page 198
    Index IN-8 Catalyst 3750 Switch Hardware Installation Guide 78-15136-02
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
You'll be entered into a quarterly drawing for
free
Cisco Press books by returning this survey! Cisco is dedicated to customer
satisfaction and would like to hear your thoughts on these printed manuals. Please visit the Cisco Product Comments on-line survey at
www.cisco.com/go/crc
to submit your comments about accessing Cisco technical manuals. Thank you for your time.
General Information
1
Years of networking experience:
Years of experience with Cisco products:
2
I have these network types:
LAN
Backbone
WAN
Other:
3
I have these Cisco products:
Switches
Routers
Other (specify models):
4
I perform these types of tasks:
H/W installation and/or maintenance
S/W configuration
Network management
Other:
5
I use these types of documentation:
H/W installation
H/W configuration
S/W configuration
Command reference
Quick reference
Release notes
Online help
Other:
6
I access this information through:
% Cisco.com
% CD-ROM
% Printed manuals
% Other:
7
I prefer this access method:
Cisco.com
CD-ROM
Printed manuals
Other:
8
I use the following three product features the most:
Document Information
Document Title:
Catalyst 3750 Switch Hardware Installation Guide
Part Number:
78-15136-02
S/W Release (if applicable):
<Software Release>
On a scale of 1–5 (5 being the best), please let us know how we rate in the following areas:
The document is complete.
The information is accurate.
The information is well organized.
The information I wanted was easy to find.
The document is written at my
technical level of understanding.
The information I found was useful to my job.
Please comment on our lowest scores:
Mailing Information
Organization
Date
Contact Name
Mailing Address
City
State/Province
Zip/Postal Code
Country
Phone (
)
Extension
E-mail
Fax
(
)
May we contact you further concerning our documentation?
Yes
No
You can also send us your comments by e-mail to
, or by fax to
408-527-8089
.
When mailing this card from outside of the United States, please enclose in an envelope addressed to the location on the back of this card with
the required postage or fax to 1-408-527-8089.