Cisco 3825 User Guide - Page 32
Pre-assigned DHCP IP Addresses Connected Devices Summary - private server
UPC - 746320981505
View all Cisco 3825 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
How Do I Configure My DOCSIS Residential Gateway? Section Network Address Server Settings (DHCP) Field Description DHCP Server Allows you to enable or disable the DHCP server in the residential gateway. The DHCP server is used to automatically allocate IP addresses to devices as they are attached to your home network. Connected Devices Summary page Click Connected Devices Summary in the Lan Setup page. The Connected Devices Summary page opens. This page is a pop-up window that displays the MAC Address and IP Address of the devices that are connected to the residential gateway. Pre-assigned DHCP IP Addresses page Click Pre-assigned DHCP IP Addresses in the Lan Setup page. The Pre-assigned DHCP IP Addresses page opens. This page allows you to assign a specific IP address to a PC or other device when they request an IP address using DHCP. Only addresses within the range of the gateway's DHCP address pool can be reserved with this feature. Notes: - The Add Static IP button adds the Static IP address to the list of pre-assigned IP addresses. - The Remove Static IP button removes the Static IP address from the list of pre-assigned IP addresses Starting IP Address Displays the starting address used by the built-in DHCP server to distribute Private LAN IP addresses. Because the device default IP address of the gateway is 192.168.0.1, the starting IP address must be 192.168.0.2 or greater, but smaller than 192.168.0.253. The default Starting IP Address is 192.168.0.10. 32 4021196 Rev A