Cisco 3825 User Guide - Page 38
G only, B/G Mixed, Standard - 20 MHz Channel
UPC - 746320981505
View all Cisco 3825 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Configure Wireless Settings Section Basic Settings Field Description Wireless Network Enable or Disable the wireless network Wireless Configuration The default is WPS. See Wi-Fi Protected Setup (WPS) (on page 35) for more information about using WPS. Select Manual to manually set up your network using this option. Network Mode Choose one of these options for the network mode: G only, B/G Mixed, B/G/N Mixed (factory default) Important: When TKIP authentication only is selected, B/G/N Mixed network mode is not available. Radio Band Select Enabled 2.4GHz (factory default) or Enabled 5GHz Note: The 5GHz radio band may not be supported on some models. Channel Width Choose Standard - 20 MHz Channel or Wide 40 MHz Channel Standard Channel Select one of the channels from the drop-down list to correspond with your network settings. All devices in your wireless network must broadcast on the same channel in order to communicate. You can select Auto (factory default) for automatic channel selection. 38 4021196 Rev A