Cisco 3825 Software Configuration Guide - Page 169

Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference interface atm ima interface atm ima To configure an ATM IMA group and enter interface configurations mode, use the interface atm ima global configuration command. If the group does not exist when the command is issued, the command automatically creates the group. interface atm slot/ima Syntax Description slot group-number Specifies the slot location of the ATM IMA port adapter. Specifies an IMA group number from 0 to 3. You can create up to four groups. Defaults By default there are no IMA groups, only individual ATM links. Command Modes Global configuration Command History Release 12.0(5)XE 12.4(4)MR Modification This command was introduced. This command was incorporated. Usage Guidelines When a port is configured for IMA functionality, it no longer operates as an individual ATM link. Specifying ATM links as members of a group using the ima-group interface command does not enable the group. You must use the interface atm slot/ima command to create the group. Examples The following example shows the how to create the IMA group: Router(config)# interface ATM0/IMA0 Router(config-if)# no ip address Related Commands Command ima-group ima group-id interface atm show ima interface atm Description Configures the physical links as IMA group members; execute this interface configuration command for each physical link that you include in an IMA group. Enables the user to configure the IMA Group ID for the IMA interface. Configures physical links for ATM. Displays general and detailed information about IMA groups and the links they include. OL-15667-03 Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide A-37