Cisco 3825 Software Configuration Guide - Page 194
mode y-cable
UPC - 746320981505
View all Cisco 3825 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 194 highlights
mode y-cable Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference mode y-cable To access the command mode that allows you to manually control the relays on the voice/WAN interface card (VWIC) or high-speed WAN interface card (HWIC), use the mode y-cable command in redundancy configuration mode. mode y-cable Syntax Description This command has no parameters, it invokes the y-cable mode. Defaults There are no default settings or behaviors. Command Modes Redundancy configuration Command History Release 12.2(8)MC2 12.2(15)MC1 12.3(11)T 12.4(2)MR Modification This command was introduced. This command was incorporated. This command was incorporated. This command was incorporated. Examples The following example enables y-cable mode: Router(config)# redundancy Router(config-r)# mode y-cable Related Commands Command standalone standby use-interface redundancy Description Indicates whether the Cisco 3825 router is being used as a standalone device and manually sets the relays. Designates a loopback interface as a health or revertive interface. Invokes redundancy mode. A-62 Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide OL-15667-03