Cisco 3825 Software Configuration Guide - Page 200

redundancy Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference redundancy To access the command mode that allows you to configure aspects of redundancy, use the redundancy command in global configuration mode. redundancy Syntax Description This command has no parameters; it invokes the redundancy mode. Defaults There are no default settings or behaviors. Command Modes Global configuration Command History Release 12.2(8)MC2 12.2(15)MC1 12.3(11)T 12.4(2)MR Modification This command was introduced. This command was incorporated. This command was incorporated. This command was incorporated. Examples The following example enables redundancy mode: Router(config)# redundancy Router(config-r) Related Commands Command mode y-cable standalone standby use-interface Description Invokes y-cable mode. Indicates whether the Cisco 3825 router is being used as a standalone device and manually sets the relays. Designates a loopback interface as a health or revertive interfaces. A-68 Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide OL-15667-03