Cisco 3825 Software Configuration Guide - Page 28
ATM AAL5 CPCS-SDU Mode, ATM One-to-One VCC Cell Mode, xconnect, one-to-one
UPC - 746320981505
View all Cisco 3825 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
New Features in Cisco IOS Release 12.4(16)MR1 Chapter 1 Overview of the Cisco 3825 Mobile Wireless Edge Router xconnect 99.99.99.99 1101 encapsulation mpls sequencing both ! 2. When more than one PVC needs to be mapped to a PW, configure the xconnect command under the subinterface mode to configure N:1 VCC cell in relay mode PW. All PVCs configured under this subinterface are mapped to the PW. A sample configuration is written as follows: interface ATM0/0/1.1 multipoint no snmp trap link-status atm cell-packing 28 mcpt-timer 3 xconnect 99.99.99.99 1200 encapsulation mpls sequencing both pvc 1/35 l2transport encapsulation aal0 ! pvc 1/36 l2transport encapsulation aal0 ! pvc 1/37 l2transport encapsulation aal0 ATM AAL5 CPCS-SDU Mode ATM adaptation layer 5 (AAL5) SDU mode maps one AAL5 type PVC to a PW. Use the xconnect command under an AAL5 encapsulation type PVC to configure AAL5 SDU mode PW. A sample configuration is written as follows: interface ATM0/0/1 no ip address load-interval 30 scrambling-payload no atm ilmi-keepalive pvc 0/100 l2transport encapsulation aal5 xconnect 99.99.99.99 1100 encapsulation mpls sequencing both ! ATM One-to-One VCC Cell Mode ATM 1:1 VCC cell relay mode maps one PVC to a PW. Use a one-to-one keyword in the xconnect command mode to specify a 1:1 VCC relay mode PW. A sample configuration is written as follows: interface ATM0/0/1 no ip address load-interval 30 scrambling-payload atm mcpt-timers 1000 2000 3000 no atm ilmi-keepalive pvc 0/102 l2transport encapsulation aal0 cell-packing 28 mcpt-timer 3 xconnect 99.99.99.99 1102 encapsulation mpls sequencing both one-to-one ! 1-18 Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide OL-15667-03