Cisco 3825 Software Configuration Guide - Page 327
UMTS Only Configuration without IMA, UMTS Only Configuration, No IMA
UPC - 746320981505
View all Cisco 3825 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 327 highlights
Appendix B Configuration Examples Overview 270642 UMTS Only Configuration without IMA The traditional UMTS configuration is similar to the GSM configuration except only UMTS traffic traverses the topology. Unlike GSM traffic, UMTS traffic arrives at the RAN-O device via ATM PVCs. The UMTS traffic is then routed over the traditional MLPPP backhaul connection. At the RNC side, the RAN-O to RNC connectivity is exactly like the Node-B to RAN-O interface connections. Aside from the necessity of ATM connectivity, the physical connectivity for UMTS is exactly like the GSM topology (see Figure B-9 on page B-59). Figure B-9 UMTS Only Configuration without IMA UMTS Only Configuration No IMA Node-B ATM0/0/0 Multilink1 10.10.10.1/30 MWR_A Multilink1 ATM0/0/0 10.10.10.2/30 MWR_B RNC MWR_A ! card type E1 0 0 card type E1 0 1 ! ! redundancy mode y-cable standalone ! network-clock-participate wic 0 network-clock-participate wic 1 network-clock-participate aim 1 network-clock-select 1 E1 0/0/1 ! ipran-mib snmp-access inBand ipran-mib location cellSite ! ! controller E1 0/0/0 mode atm aim 1 clock source internal ! controller E1 0/0/1 channel-group 0 timeslots 1-31 ! ! class-map match-any llq-class match ip dscp ef ! ! policy-map llq-policy class llq-class priority percent 99 class class-default bandwidth remaining percent 1 queue-limit 45 ! OL-15667-03 Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide B-59