Cisco 3845 Message Guide

Cisco 3845 - Security Bundle Router Manual

Get Cisco 3845 - Security Bundle Router PDF manuals and user guides
UPC - 746320981420
View all Cisco 3845 manuals
Add to My Manuals
Save this manual to your list of manuals

Cisco 3845 manual content summary:

  • Cisco 3845 | Message Guide - Page 1
    Switch System Message Guide, Cisco IOS Release 12.2(52)EY Cisco IOS Release 12.2(52)EY October 2010 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: OL-23408-01
  • Cisco 3845 | Message Guide - Page 2
    , command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental. Cisco ME 3800X and ME 3600X Switch System Message Guide
  • Cisco 3845 | Message Guide - Page 3
    and ME 3600X switch-specific system messages that you might encounter. For a complete list of Cisco IOS system error messages, see the Cisco IOS Software System Error Messages, Cisco IOS Release 12.2. This guide does not describe how to install your switch or how to configure software features on
  • Cisco 3845 | Message Guide - Page 4
    the Cisco ME 3800X and ME 3600X Switch Power-Supply and Fan Modules • Regulatory Compliance and Safety Information for the Cisco ME 3800X and ME 3600X Switches • Cisco Small Form-Factor Pluggable Modules Installation Notes • Cisco CWDM GBIC and CWDM SFP Installation Notes These compatibility matrix
  • Cisco 3845 | Message Guide - Page 5
    a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0. OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide v
  • Cisco 3845 | Message Guide - Page 6
    Preface Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide vi OL-23408-01
  • Cisco 3845 | Message Guide - Page 7
    Service Request v System Message Overview 1-1 How to Read System Messages 1-1 Error Message Traceback Reports 1-5 Output Interpreter 1-5 Bug Toolkit 1-5 Contacting TAC 1-5 Messages and Recovery IDBMAN Messages 2-22 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide vii
  • Cisco 3845 | Message Guide - Page 8
    2-64 STORM_CONTROL Messages 2-65 SUDI Messages 2-66 SUPERVISOR Messages 2-66 SUPQ Messages 2-67 SW_VLAN Messages 2-68 TCAMMGR Messages 2-73 UDLD Messages 2-74 VQPCLIENT Messages 2-75 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide viii OL-23408-01
  • Cisco 3845 | Message Guide - Page 9
    about system messages that are not Cisco ME switch platform-specific, see the Cisco IOS Software System Messages for Cisco IOS Release 12.2S. • How to Read System Messages, page 1-1 • Error Message Traceback Reports, page 1-5 How to Read System Messages System log messages can contain up to 80
  • Cisco 3845 | Message Guide - Page 10
    page 14 ETHCNTR Ethernet Controller "ETHCNTR Messages" section on page 2-14 FRNTEND_CTRLR Front-end controller "FRNTEND_CTRLR Messages" section on page 2-15 GBIC_SECURITY Gigabit Interface Converter (GBIC) module and small form-factor pluggable (SFP) module security "GBIC_SECURITY Messages
  • Cisco 3845 | Message Guide - Page 11
    VLAN "PLATFORM_VLAN Messages" section on page 2-38 Port manager "PM Messages" section on page 2-39 Port security "PORT_SECURITY Messages" section on page 2-45 QoS manager "QOSMGR Messages" section on page 2-46 Resilient Ethernet Protocol "REP Messages" section on page 2-55 Remote network
  • Cisco 3845 | Message Guide - Page 12
    is unusable. Immediate action required. Critical condition. Error condition port numbers, network addresses, or addresses that correspond to locations in the system memory Ethernet address (for example, 0000.FEED.00C0) Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
  • Cisco 3845 | Message Guide - Page 13
    allows you to search for all known bugs in a specific Cisco IOS Release. http://tools.cisco.com/Support/BugToolKit/ Contacting TAC If you cannot determine the nature of the error, see the "Obtaining Documentation and Submitting a Service Request" section on page v for further information. OL-23408
  • Cisco 3845 | Message Guide - Page 14
    Error Message Traceback Reports Chapter 1 System Message Overview Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 1-6 OL-23408-01
  • Cisco 3845 | Message Guide - Page 15
    Recovery Procedures This chapter describes the Cisco ME 3800X and 3600X switches system messages in alphabetical order by facility. Note that some messages apply only to specific configured for system log messaging Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-1
  • Cisco 3845 | Message Guide - Page 16
    Chapter 2 Messages and Recovery Procedures • ILET Messages, page 2-26 • MAC_LIMIT Messages, page 2-26 • MAC_MOVE Messages, Messages, page 2-73 • UDLD Messages, page 2-74 • VQPCLIENT Messages, page 2-75 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-2 OL-23408-01
  • Cisco 3845 | Message Guide - Page 17
    ACL manager could not save per-VLAN information needed for its correct operation. Some per-interface features, such as access groups or VLAN maps, will not be configured correctly. [dec] is the VLAN number. Recommended Action Change configuration to reduce memory usage. Error Message ACLMGR-2-NOVMR
  • Cisco 3845 | Message Guide - Page 18
    encountered the problem. Recommended Action Reduce the number of IP or MAC access lists (considered separately) in any one VLAN or policy map to fewer than the number of levels reported by this log message. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-4 OL
  • Cisco 3845 | Message Guide - Page 19
    your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
  • Cisco 3845 | Message Guide - Page 20
    the interface is configured to support the number of hosts that are attached to it. Enter the shutdown interface configuration command followed by no shutdown interface configuration command to restart the interface. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
  • Cisco 3845 | Message Guide - Page 21
    configure [chars] to be a trunk port. Explanation Flex Link VLAN load-balancing (VLB) detected a nontrunk port. [chars] is the interface name. Recommended Action Change the interface to trunking mode. OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
  • Cisco 3845 | Message Guide - Page 22
    your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-8 OL
  • Cisco 3845 | Message Guide - Page 23
    or provide your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. Error Message EC-5-BUNDLE: Interface [chars] joined port-channel [chars]. Explanation
  • Cisco 3845 | Message Guide - Page 24
    , and the second [chars] is the name of the local interface that is already bundled. Recommended Action Make sure that the configuration of the remote ports is the same for all ports in the bundle. 2-10 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL-23408-01
  • Cisco 3845 | Message Guide - Page 25
    side by using the channel-group interface configuration command. Error Message EC-5-L3DONTBNDL2: [chars] suspended: LACP currently not enabled on the remote port. Explanation LACP is enabled on a Layer 3 interface but is not enabled on the partner port. The port is put in a suspended state. [chars
  • Cisco 3845 | Message Guide - Page 26
    is not included in the Cisco IOS image and that the EtherChannel mode cannot be set to desirable or auto. Recommended Action Obtain an image with PAgP included, or set the mode to on by using the channel-group channel-group-number mode on interface configuration command. Error Message EC-5-PORTDOWN
  • Cisco 3845 | Message Guide - Page 27
    be a hardware failure. If a power-supply or fan module failed, replace it. Check that the ambient temperature configured minimum threshold but is now within the normal range. Recommended Action No action is required. Error Message ENVIRONMENT-3-OVERVOLT: [chars] Line Exceeds High Threshold Limit
  • Cisco 3845 | Message Guide - Page 28
    bring the port up by using the no shutdown interface configuration command. We do not recommend using the no keepalive interface command to disable keepalives. The cause of this network loop must be found and 2-14 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL
  • Cisco 3845 | Message Guide - Page 29
    the fan-control features is now inactive on the port controlled by the front-end controller. This does not affect the traffic on the port. [dec] is the controller number. Recommended Action Reset the switch. If the problem is not resolved by resetting the switch, contact your Cisco technical support
  • Cisco 3845 | Message Guide - Page 30
    a newly inserted transceiver module for the interface specified in the message. The first [chars] is the module, and the second [chars] is the interface. Recommended Action No action is required. 2-16 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL-23408-01
  • Cisco 3845 | Message Guide - Page 31
    switch supports the SFP module. You might need to upgrade your software. Even if the SFP module is unrecognized by the switch, the SFP module might still operate properly but have limited functionality. OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
  • Cisco 3845 | Message Guide - Page 32
    dec] is the interface in which the duplicate module is installed. Recommended Action Cisco SFP modules are assigned unique serial numbers. Verify that the module was obtained from Cisco or from a supported vendor. HARDWARE Messages Error Message HARDWARE-2-FAN_ERROR: Fan [chars] Failure Explanation
  • Cisco 3845 | Message Guide - Page 33
    and Recovery Procedures HARDWARE Messages Error Message HARDWARE-3-ASICNUM_ERROR: [traceback] Port-ASIC number [dec] is invalid Explanation The port ASIC number is invalid. [dec] is the port ASIC number. Recommended Action Copy the message exactly as it appears on the console, or in the system log
  • Cisco 3845 | Message Guide - Page 34
    your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. 2-20 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL
  • Cisco 3845 | Message Guide - Page 35
    your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
  • Cisco 3845 | Message Guide - Page 36
    your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. 2-22 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL
  • Cisco 3845 | Message Guide - Page 37
    was not. The first [chars] is the interface name, and the second [chars] is the port-channel name. The ([dec] / [dec]) are the slot and port numbers (slot/port). Recommended Action Copy the message exactly as it appears on the console or in the system log. Research and attempt to resolve the error
  • Cisco 3845 | Message Guide - Page 38
    ] is the number of bytes being read from the IfIndex table when the corruption was detected. Recommended Action Use the delete nvram:ifindex-table privileged EXEC command to delete the IfIndex table. 2-24 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL-23408-01
  • Cisco 3845 | Message Guide - Page 39
    because PIM is no longer enabled on the SVI. Explanation PIM is disabled on the SVI, and the IGMP querier function is now enabled. [dec] is the VLAN number. Recommended Action No action is required. OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-25
  • Cisco 3845 | Message Guide - Page 40
    ] is the maximum number of MAC address entries, and the third [dec] is the number of entries in the MAC address table. Recommended Action Contact your system administrator to configure this action. 2-26 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL-23408-01
  • Cisco 3845 | Message Guide - Page 41
    one switch to go into recovery mode. [chars] is the interface, the first [enet] is the new active ID, and the second [enet] is the ID that it replaces. Recommended Action No action is required. OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-27
  • Cisco 3845 | Message Guide - Page 42
    shutdown interface configuration command and then the no shutdown interface configuration command to reset the interface. Error Message PHY-4-MODULE_DUP: SFPs in [chars] and in [chars] have duplicate vendor-id and serial numbers. Explanation The SFP module was identified as a Cisco SFP module, but
  • Cisco 3845 | Message Guide - Page 43
    online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. Error Message PHY-4-SFP_NOT_SUPPORTED: The SFP in [chars] is not supported Explanation The SFP module type is not supported on this switch. [chars] is the interface. Recommended Action Copy the
  • Cisco 3845 | Message Guide - Page 44
    or the VLAN name, such as VLAN0002. Recommended Action Reduce the total number of VLANs and routed ports to less than 1023. To preserve configurations and connections across reboots, save the configuration. 2-30 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL
  • Cisco 3845 | Message Guide - Page 45
    (FRU) power supply, small form-factor pluggable (SFP) module, FPGA, serial peripheral interface (SPI), Joint Test Action Group (JTAG), and alarm status Recommended Action If the message appears again, replace the control FPGA. OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch
  • Cisco 3845 | Message Guide - Page 46
    determine FRU power supply, SFP module, FPGA, SPI, JTAG, and alarm state changes. Recommended Action If the message appears again, upgrade the control FPGA. If the message appears even after upgrading the control FPGA, contact TAC or your Cisco representative to have the switch replaced. Error
  • Cisco 3845 | Message Guide - Page 47
    Error Message PLATFORM_ENV-1-FRU_PS_OIR: FRU Power Supply [chars] Explanation The specified power supply is inserted or removed. [chars] is the power supply. Recommended Action No action is required. OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-33
  • Cisco 3845 | Message Guide - Page 48
    number, and [chars] is the route-map. Recommended Action Use the set ip next-hop ip-address route-map configuration command to reconfigure the route map action to route the packet to the specified next hop. 2-34 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
  • Cisco 3845 | Message Guide - Page 49
    your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
  • Cisco 3845 | Message Guide - Page 50
    your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. 2-36 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL
  • Cisco 3845 | Message Guide - Page 51
    technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. Error Message PLATFORM_UCAST-3-HSRP: [chars]. Explanation The Hot Standby Router Protocol (HSRP) module for
  • Cisco 3845 | Message Guide - Page 52
    your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. 2-38 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL
  • Cisco 3845 | Message Guide - Page 53
    your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
  • Cisco 3845 | Message Guide - Page 54
    your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. 2-40 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL
  • Cisco 3845 | Message Guide - Page 55
    your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
  • Cisco 3845 | Message Guide - Page 56
    your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. 2-42 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL
  • Cisco 3845 | Message Guide - Page 57
    VLAN. The interface cannot be enabled. [chars] is the interface name. Recommended Action Remove the extended-range VLAN by using the no vlan vlan-id global configuration command to free up resources. OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
  • Cisco 3845 | Message Guide - Page 58
    interfaces on the same module are in one bundle, and the port channel is carrying VLAN 1, it counts as eight VLAN ports. [chars] is the module name (for example, switch or the module number), and [dec] is the recommended limit. Recommended Action Reduce the number of trunks and VLANs configured
  • Cisco 3845 | Message Guide - Page 59
    unauthorized device, and [chars] is the secure port. Recommended Action Identify the device that attempted to connect on the secure port. Notify your network system administrator of this condition. OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-45
  • Cisco 3845 | Message Guide - Page 60
    hot swapping or port-mode changes (for example, when the port is converted from a Layer 3 to a Layer 2 port). [chars] is the port. Recommended Action No action is required. Error Message PORT_SECURITY-6-VLAN_REMOVED: VLAN [int] is no longer allowed on port [chars]. Its port security configuration
  • Cisco 3845 | Message Guide - Page 61
    support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. Error Message QOSMGR-3-HW_PROGRAM_SHAPE_CLASS_FAIL: Error in programming hardware for port shape for interface
  • Cisco 3845 | Message Guide - Page 62
    your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. 2-48 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL
  • Cisco 3845 | Message Guide - Page 63
    your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
  • Cisco 3845 | Message Guide - Page 64
    your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. 2-50 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL
  • Cisco 3845 | Message Guide - Page 65
    your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
  • Cisco 3845 | Message Guide - Page 66
    your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. 2-52 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL
  • Cisco 3845 | Message Guide - Page 67
    configuration command) than supported by hardware, which is not allowed, causes this condition. [chars] is the policy-map name. Recommended Action Reconfigure the class maps or the policy maps, or delete the policy map from some interfaces. OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet
  • Cisco 3845 | Message Guide - Page 68
    of the hardware, specifically the number of QoS labels. The QoS label entries needed by this particular policy map configuration, along with the ones already allocated for any other policy maps attached to interfaces, cause the total number of required entries to exceed the limit supported by the
  • Cisco 3845 | Message Guide - Page 69
    segment number, and [char] is the reason for the failure. Recommended Action Correct the configuration. Run REP manual preemption on the primary edge port by using the rep preempt segment command. OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-55
  • Cisco 3845 | Message Guide - Page 70
    your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. 2-56 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL
  • Cisco 3845 | Message Guide - Page 71
    that the configuration of the native VLAN ID is consistent on the interfaces on each end of the 802.1Q trunk connection. When corrected, spanning tree automatically unblocks the interfaces, as appropriate. OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
  • Cisco 3845 | Message Guide - Page 72
    side has successfully bundled the ports into the EtherChannel. The first [chars] is the port, and the second [chars] is the VLAN. Recommended Action Identify the local ports using the show interfaces status err-disabled privileged EXEC command, and then check the EtherChannel configuration on the
  • Cisco 3845 | Message Guide - Page 73
    second [chars] is the spanning-tree mode displayed in the show spanning-tree privileged EXEC command. Recommended Action No action is required. Error Message SPANTREE-2-PVSTSIM_FAIL: Superior PVST BPDU received on VLAN [dec] port [chars], claiming root [dec]:[enet]. Invoking root guard to block the
  • Cisco 3845 | Message Guide - Page 74
    when the native VLAN is not consistently configured on both ends of an 802.1Q trunk. [dec] is the VLAN ID, the first [chars] is the port, and the second [chars] is the VLAN. Recommended Action Verify that the configurations of the native VLAN ID is consistent on the interfaces on each end of the 802
  • Cisco 3845 | Message Guide - Page 75
    -tree instance. Recommended Action No action is required. Error Message SPANTREE-3-BAD_PORTNUM_SIZE: Rejected an attempt to set the port number field size to [dec] bits (valid range is [dec] to [dec] bits). Explanation An error occurred in the platform-specific code that caused it to request more or
  • Cisco 3845 | Message Guide - Page 76
    is the interface ID for the previous root port, the second [chars] is the interface ID for the new root port, and [enet] is the Ethernet address of the new root port. Recommended Action No action is required. 2-62 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL
  • Cisco 3845 | Message Guide - Page 77
    PORTDEL_SUCCESS: [chars] deleted from Vlan [dec]. Explanation The interface has been deleted from VLAN. [chars] is the interface, and [dec] is the VLAN ID. Recommended Action No action is required. OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-63
  • Cisco 3845 | Message Guide - Page 78
    is required. SPANTREE_VLAN_SW Messages Error Message SPANTREE_VLAN_SW-2-MAX_INSTANCE: Platform limit of [dec] STP instances exceeded. No instance created for [chars] (port [chars]). Explanation The number of currently active VLAN spanning-tree instances has reached a platform-specific limit. No
  • Cisco 3845 | Message Guide - Page 79
    recovery by using the errdisable recovery global configuration command to automatically re-enable the interface. You should determine and fix the root cause of the excessive traffic on the interface. OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
  • Cisco 3845 | Message Guide - Page 80
    your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. 2-66 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL
  • Cisco 3845 | Message Guide - Page 81
    log. Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to look for similar reported problems. If you still need assistance, open a case with the TAC, or provide OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
  • Cisco 3845 | Message Guide - Page 82
    your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. 2-68 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL
  • Cisco 3845 | Message Guide - Page 83
    upcall and a VLAN cookie from the port manager that translated to a bad VLAN number. [dec] is the VLAN ID. Recommended Action Find out more about the error by using the show tech-support privileged EXEC command. Copy the message exactly as it appears on the console or in the system log. Research and
  • Cisco 3845 | Message Guide - Page 84
    and Recovery Procedures reported problems. If you still need assistance, open a case with the TAC, or provide your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports
  • Cisco 3845 | Message Guide - Page 85
    your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
  • Cisco 3845 | Message Guide - Page 86
    the VLAN configuration file format. It interpreted the file, but it will use the new format in the future. The first [dec] is the old version number, and the second [dec] is the new version number. Recommended Action No action is required. 2-72 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access
  • Cisco 3845 | Message Guide - Page 87
    provide your Cisco technical support representative with your information. For more information about these online tools and about contacting Cisco, see the "Error Message Traceback Reports" section on page 1-5. Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-73
  • Cisco 3845 | Message Guide - Page 88
    system log. Research and attempt to resolve the error by using the Output Interpreter. Use the Bug Toolkit to look for similar reported problems. If you still need assistance, open a case with the TAC, or provide 2-74 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide
  • Cisco 3845 | Message Guide - Page 89
    an unknown VLAN name. [chars] is the invalid VLAN name. Recommended Action Ensure that the VLAN exists on the switch. Verify the VMPS configuration by using the show vmps privileged EXEC command. OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2-75
  • Cisco 3845 | Message Guide - Page 90
    VQPCLIENT Messages Chapter 2 Messages and Recovery Procedures 2-76 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide OL-23408-01
  • Cisco 3845 | Message Guide - Page 91
    HLFM messages 121 I IDBMAN messages 122 IGMP_QUERIER messages 125 interface description block manager messages See IDBMAN messages Internet Group Management Protocol messages See IGMP_QUERIER messages OL-23408-01 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 1
  • Cisco 3845 | Message Guide - Page 92
    Index L local forwarding manager messages See HLFM messages M MAC_LIMIT messages 126 MAC_MOVE messages messages See PLATFORM_PBR messages PORT_SECURITY messages 145 port manager messages See PM messages Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 2 OL-23408-01
  • Cisco 3845 | Message Guide - Page 93
    service manager messages See QOSMGR messages R REP messages 155 Resilient Ethernet protocol messages See REP messages RMON messages 156 S secure UDI validation messages See SUDI messages SFP addressable memory manager messages See TCAMMGR messages time-stamp information 11 traceback reports 15
  • Cisco 3845 | Message Guide - Page 94
    Index VQPCLIENT messages 175 Cisco ME 3400E, ME 3400, and ME 2400 Ethernet Access Switch System Message Guide 4 OL-23408-01
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Cisco ME 3800X and ME 3600X Switch
System Message Guide, Cisco IOS Release
12.2(52)EY
Cisco IOS Release 12.2(52)EY
Octobe
r 2010
Text Part Number: OL-23408-01