Cisco 6941 Administration Guide - Page 138
Description, Sender Report Time Sent
UPC - 882658277801
View all Cisco 6941 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Streaming Statistics Chapter Table 8-5 Streaming Statistics Area Items Item Remote Address Local Address Start Time Stream Status Host Name Sender Packets Sender Octets Sender Codec Sender Reports Sent1 Sender Report Time Sent1 Rcvr Lost Packets Avg Jitter Rcvr Codec Rcvr Reports Sent1 Rcvr Report Time Sent1 Rcvr Packets Rcvr Octets Cumulative Conceal Ratio Interval Conceal Ratio Max Conceal Ratio Conceal Secs Severely Conceal Secs Latency1 Description IP address and UDP port of the destination of the stream. IP address and UPD port of the phone. Internal time stamp indicating when Cisco Unified Communications Manager requested that the phone start transmitting packets. Indication of whether streaming is active or not. Unique, fixed name that is automatically assigned to the phone based on its MAC address. Total number of RTP data packets transmitted by the phone since starting this connection. The value is 0 if the connection is set to receive only mode. Total number of payload octets transmitted in RTP data packets by the phone since starting this connection. The value is 0 if the connection is set to receive only mode. Type of audio encoding used for the transmitted stream. Number of times the RTCP Sender Report have been sent. Internal time stamp indication when the last RTCP Sender Report was sent. Total number of RTP data packets that have been lost since starting receiving data on this connection. Defined as the number of expected packets less the number of packets actually received, where the number of received packets includes any that are late or duplicate. The value displays as 0 if the connection was set to send-only mode. Estimate of mean deviation of the RTP data packet inter-arrival time, measured in milliseconds. The value displays as 0 if the connection was set to send-only mode. Type of audio encoding used for the received stream. Number of times the RTCP Receiver Reports have been sent. Internal time stamp indication when a RTCP Receiver Report was sent. Total number of RTP data packets received by the phone since starting receiving data on this connection. Includes packets received from different sources if this is a multicast call. The value displays as 0 if the connection was set to send-only mode. Total number of payload octets received in RTP data packets by the device since starting reception on the connection. Includes packets received from different sources if this is a multicast call. The value displays as 0 if the connection was set to send-only mode. Total number of concealment frames divided by total number of speech frames received from start of the voice stream. Ratio of concealment frames to speech frames in preceding 3-second interval of active speech. If using voice activity detection (VAD), a longer interval might be required to accumulate 3 seconds of active speech. Highest interval concealment ratio from start of the voice stream. Number of seconds that have concealment events (lost frames) from the start of the voice stream (includes severely concealed seconds). Number of seconds that have more than 5 percent concealment events (lost frames) from the start of the voice stream. Estimate of the network latency, expressed in milliseconds. Represents a running average of the round-trip delay, measured when RTCP receiver report blocks are received. 8-10 Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP) OL-23769-01