Cisco 6941 Administration Guide - Page 145
Registering the Phone with Cisco Unified Communications Manager
UPC - 882658277801
View all Cisco 6941 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 145 highlights
Chapter Resolving Startup Problems Procedure Step 1 Step 2 Step 3 Step 4 From Cisco Unified Communications Manager, choose Device > Phone > Find to locate the phone experiencing problems. Choose Delete to remove the phone from the Cisco Unified Communications Manager database. Add the phone back to the Cisco Unified Communications Manager database. See the "Adding Phones to the Cisco Unified CM Database" section on page 2-8 for details. Power cycle the phone. Note • When you remove a phone from the Cisco Unified Communications Manager database, its configuration file is deleted from the Cisco Unified Communications Manager TFTP server. The phone's directory number or numbers remain in the Cisco Unified Communications Manager database. They are called "unassigned DNs" and can be used for other devices. If unassigned DNs are not used by other devices, delete them from the Cisco Unified Communications Manager database. You can use the Route Plan Report to view and delete unassigned reference numbers. Refer to Cisco Unified Communications Manager Administration Guide for more information. • Changing the buttons on a phone button template, or assigning a different phone button template to a phone, may result in directory numbers that are no longer accessible from the phone. The directory numbers are still assigned to the phone in the Cisco Unified Communications Manager database, but there is no button on the phone with which calls can be answered. These directory numbers should be removed from the phone and deleted if necessary. Registering the Phone with Cisco Unified Communications Manager A Cisco Unified IP Phone can register with a Cisco Unified Communications Manager server only if the phone has been added to the server or if auto-registration is enabled and if there are sufficient number of unit licenses. Review the information and procedures in the "Adding Phones to the Cisco Unified CM Database" section on page 2-8 to ensure that the phone has been added to the Cisco Unified Communications Manager database. To verify that the phone is in the Cisco Unified Communications Manager database, choose Device > Phone > Find from Cisco Unified Communications Manager Administration to search for the phone based on its MAC Address. For information about determining a MAC address, see the "Determining the MAC Address for a Cisco Unified IP Phone" section on page 2-13. If the phone is already in the Cisco Unified Communications Manager database, its configuration file may be damaged. See the "Creating a New Configuration File" section on page 9-4 for assistance. For more information on licensing go to the Licensing section in the Cisco Unified Communications Manager Features and Services Guide. Symptom: Cisco Unified IP Phone Unable to Obtain IP Address If a phone is unable to obtain an IP address when it starts up, the phone may be not be on the same network or VLAN as the DHCP server, or the switch port to which the phone is connected may be disabled. Make sure that the network or VLAN to which the phone is connected has access to the DHCP server, and make sure that the switch port is enabled. Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP) OL-23769-01 9-5