Cisco 6941 Administration Guide - Page 57
Setting Up the Cisco Unified IP Phone, Before You Begin, Network Requirements
UPC - 882658277801
View all Cisco 6941 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
3 C H A P T E R Setting Up the Cisco Unified IP Phone This chapter includes the following topics, which help you install the Cisco Unified IP Phone on an IP telephony network: • Before You Begin, page 3-1 • Understanding the Cisco Unified IP Phones 6921, 6941, 6945, and 6961 Components, page 3-2 • Installing the Cisco Unified IP Phone, page 3-5 • Footstand, page 3-10 • Reducing Power Consumption on the Phone, page 3-10 • Verifying the Phone Startup Process, page 3-15 • Configuring Startup Network Settings, page 3-16 • Configuring Security on the Cisco Unified IP Phone, page 3-16 Note Before you install a Cisco Unified IP phone, you must decide how to configure the phone in your network. Then you can install the phone and verify its functionality. For more information, see Chapter 2, "Preparing to Install the Cisco Unified IP Phone on Your Network." Before You Begin Before installing the Cisco Unified IP Phone, review the requirements in these sections: • Network Requirements, page 3-1 • Cisco Unified Communications Manager Configuration, page 3-2 Network Requirements For the Cisco Unified IP Phone to successfully operate as a Cisco Unified IP Phone endpoint in your network, your network must meet the following requirements: • Working VoIP network: - VoIP configured on your Cisco routers and gateways - Cisco UnifiedCM installed in your network and configured to handle call processing • IP network that supports DHCP or manual assignment of IP address, gateway, and subnet mask Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP) OL-23769-01 3-1