Cisco 6941 Administration Guide - Page 80
IPv4 Setup Menu Options
UPC - 882658277801
View all Cisco 6941 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
IPv4 Setup Menu Options Chapter Table 4-1 Network Setup Menu Options (continued) Option Description To Change PC Port Setup Speed and duplex of the access port. Valid values: 1. Unlock network setup options. • Auto Negotiate • 1000 Full-1000-BaseT/full duplex (Supported only for Cisco Unified IP Phone 6945.) • 100 Half-100-BaseT/half duplex • 100 Full-100-BaseT/full duplex 2. Scroll to the PC Port Setup option and then press the Edit softkey. 3. Scroll to the setting that you want and then press the Select button. • 10 Half-10-BaseT/half duplex • 10 Full-10-BaseT/full duplex If the phone is connected to a switch, configure the port on the switch to the same speed/duplex as the phone, or configure both to auto-negotiate. If you change the setting of this option, you must change the SW Port Configuration option to the same setting. To configure the setting on multiple phones simultaneously, enable the PC Port Remote Configuration in the Enterprise Phone Configuration (System > Enterprise Phone Configuration). Note If the ports are configured for PC Port Remote Configuration in Unified CM, the data cannot be changed on the phone. LLDP-MED: Switch Port Enables and disables Link Layer Discovery Protocol Media Endpoint Discovery (LLDP-MED) on the switch port. Use this setting to force the phone to use a specific discovery protocol, which should match the protocol supported by the switch. Settings include: From Cisco Unified CM Administration, choose Device > Phone > Phone Configuration. • Enabled-default • Disabled IPv4 Setup Menu Options The IPv4 Setup menu is a submenu of the Network Setup menu. To reach the IPv4 Setup menu, select the IPv4 option on the Network Setup menu. Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.5 (SCCP and SIP) 4-6 OL-23769-01