Cisco AIR-AP1242AG-E-K9 Hardware Installation Guide - Page 71

Mounting Above a Suspended Ceiling

Page 71 highlights

Chapter 6 Mounting Instructions Mounting Above a Suspended Ceiling Step 7 Use a wrench or pliers to tighten the Keps nuts. Do not overtighten. Step 8 Attach the access point to the mounting bracket. Mounting Above a Suspended Ceiling The access point mounting bracket is designed to be integrated into the T-bar grid above the tiles of a suspended ceiling. Using a T-bar box hanger and bracket mounting clip (not supplied) such as the Erico 512A and BHC, you orient the access point antenna just above the top surface of a standard ceiling tile. You may need to modify a thicker tile to allow room for the antenna. Caution Only the fiber-optic power injector (AIR-PWRINJ-FIB) has been tested to UL 2043 for operation in a building's environmental air space; no other power injectors or power modules have been tested to UL 2043 and they should not be placed in a building's environmental air space, such as above suspended ceilings. It may be helpful to refer to Figure 6-3 before proceeding. Figure 6-3 Mounting Bracket Parts 4 3 5 6 2 1 3 7 2 1 95740 1 Suspended ceiling T-rail 2 T-rail clip 3 Height adjustment screw 4 T-bar box hanger 5 Bracket mounting clip 6 Access point mounting bracket 7 Access point OL-4310-05 Cisco Aironet 1200 Series Access Point Hardware Installation Guide 6-5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160

6-5
Cisco Aironet 1200 Series Access Point Hardware Installation Guide
OL-4310-05
Chapter 6
Mounting Instructions
Mounting Above a Suspended Ceiling
Step 7
Use a wrench or pliers to tighten the Keps nuts. Do not overtighten.
Step 8
Attach the access point to the mounting bracket.
Mounting Above a Suspended Ceiling
The access point mounting bracket is designed to be integrated into the T-bar grid above the tiles of a
suspended ceiling. Using a T-bar box hanger and bracket mounting clip (not supplied) such as the
Erico 512A and BHC, you orient the access point antenna just above the top surface of a standard ceiling
tile. You may need to modify a thicker tile to allow room for the antenna.
Caution
Only the fiber-optic power injector (AIR-PWRINJ-FIB) has been tested to UL 2043 for operation in a
building’s environmental air space; no other power injectors or power modules have been tested to UL 2043
and they should not be placed in a building’s environmental air space, such as above suspended ceilings.
It may be helpful to refer to
Figure 6-3
before proceeding.
Figure 6-3
Mounting Bracket Parts
1
Suspended ceiling T-rail
5
Bracket mounting clip
2
T-rail clip
6
Access point mounting bracket
3
Height adjustment screw
7
Access point
4
T-bar box hanger
95740
4
5
6
7
3
3
1
2
2
1