Cisco AIR-LAP1141N-E-K9 Data Sheet

Cisco AIR-LAP1141N-E-K9 Manual

Cisco AIR-LAP1141N-E-K9 manual content summary:

  • Cisco AIR-LAP1141N-E-K9 | Data Sheet - Page 1
    ● Controller-based or standalone deployment options ● CleanAir1 technology reduces troubleshooting and performance impacts Secure Connections ● Supports rogue access point detection and denial of service attacks ● Management frame protection detects malicious users and alerts network administrators
  • Cisco AIR-LAP1141N-E-K9 | Data Sheet - Page 2
    Related) Capabilities Data Rates Supported Specification Cisco Aironet 1140 Series Access Point ● AIR-LAP1142N-x-K9-Dual-band Controller-based 802.11a/g/n ● AIR-LAP1141N-x-K9-Single-band Controller-based 802.11g/n ● AIR-AP1142N-x-K9-Dual-band Standalone 802.11a/g/n ● AIR-AP1141N-x-K9-Single-band
  • Cisco AIR-LAP1141N-E-K9 | Data Sheet - Page 3
    Data Sheet Item Specification 20-MHz Rate (Mbps) 40-MHz Rate (Mbps) 20-MHz Rate (Mbps) 0 6.5 13.5 7.2 1 13 27 ) between symbols helps receivers overcome the effects of multipath delays. © 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 6
  • Cisco AIR-LAP1141N-E-K9 | Data Sheet - Page 4
    Data Sheet Item Specification Receive Sensitivity 802.11b -91 dBm @ 1 Mb/s -91 dBm @ 2 Mb/s -91 dBm @ 5.5 Mb/s -88 . Dimensions (W x L x H) ● Access point (without mounting bracket): 8.7 x 8.7 x 1.84 in. (22.1 x 22.1 x 4.7 cm) © 2010 Cisco Systems, Inc. All rights reserved. This document
  • Cisco AIR-LAP1141N-E-K9 | Data Sheet - Page 5
    Supply (AIR-PWR-A=) ● AP1140: 12.95 W Note: When deployed using PoE, the power drawn from the power sourcing equipment will be higher by some amount dependent on the length of the interconnecting cable. This additional power may be as high as 2.45W, bringing the total system power draw (access point
  • Cisco AIR-LAP1141N-E-K9 | Data Sheet - Page 6
    , implementing, operating, and optimizing the performance of your wireless network. Cisco recommends the following services for the Cisco Aironet 1140 Series Access Points implementation: Cisco Wireless LAN 802.11n Readiness Assessment Service Prevent common challenges and reduce deployment costs by
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6

Data Sheet
© 2010 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 6
Cisco Aironet 1140 Series Access Point
Taking Business Mobility Mainstream
The Cisco
®
Aironet
®
1140 Series Access Point is a business-ready,
802.11n access point designed for simple deployment and energy
efficiency. The high-performance platform, which offers at least six times
the throughput of existing 802.11a/g networks, prepares the business for
the next wave of mobile devices and applications. Building on the Cisco
Aironet heritage of RF excellence, the 1140 Series combines the
industry’s most widely deployed 802.11n technology with a sleek
industrial design that blends seamlessly into any enterprise environment.
Designed for sustainability, the 1140 Series delivers high performance
from standard 802.3af Power over Ethernet while decreasing waste with
multiunit eco-packs and Energy Star certified power supplies. As part of
the Cisco Unified Wireless Network, the 1140 Series provides the
industry’s lowest total cost of ownership and investment protection by
integrating seamlessly with the existing network.
RF Excellence
The Cisco Unified Wireless Network with M-Drive technology removes the
mystery associated with design, implementation, and ongoing
optimization of enterprise wireless networks. With Cisco M-Drive
technology, IT has the tools needed to build and operate a high
performance wireless network without the need for extensive RF
engineering skills. Cisco M-Drive technology is a systemwide approach
that manages the corporate RF spectrum, improves wireless coverage,
and increases system capacity and performance. Features include:
Radio resource management (RRM): Automated self-healing optimizes the unpredictability of RF to reduce
dead spots and help ensure high availability client connections. RRM optimizes network capacity and
mitigates interference by continuously monitoring and adjusting access point power and channel settings and
then load balancing clients to enhance wireless coverage.
Performance with Investment Protection
Six times faster than 802.11a/g networks
Backward-compatible with 802.11a/b/g
clients
M-Drive technology optimizes RF
Easy Installation and Power Efficient
802.11n performance with existing PoE
switches
Sleek design blends into a variety of indoor
environments
Secure Interoperability
802.11n compliant
Intel Connect with Centrino Certified
Simplified Network Management
Controller-based or standalone deployment
options
CleanAir
1
technology reduces
troubleshooting and performance impacts
Secure Connections
Supports rogue access point detection and
denial of service attacks
Management frame protection detects
malicious users and alerts network
administrators
Greater Network Capacity
Dynamic frequency selection 2 (DFS-2)
compliant
Easy-to-Install, Multipurpose Mounting
Bracket
Designed for easy replacement of existing
access points
UL 2043 plenum rated for above ceiling
installation options or suspended from drop
ceilings.
Locks for theft protection