Cisco AIR-LAP1242AG-A-K9 Data Sheet
Cisco AIR-LAP1242AG-A-K9 Manual
 |
View all Cisco AIR-LAP1242AG-A-K9 manuals
Add to My Manuals
Save this manual to your list of manuals |
Cisco AIR-LAP1242AG-A-K9 manual content summary:
- Cisco AIR-LAP1242AG-A-K9 | Data Sheet - Page 1
two versions: unified or autonomous. Unified access points operate with the Lightweight Access Point Protocol (LWAPP) and work in conjunction with Cisco wireless LAN controllers and the Cisco Wireless Control System (WCS). When configured with LWAPP, the Cisco Aironet 1240AG Series can automatically - Cisco AIR-LAP1242AG-A-K9 | Data Sheet - Page 2
wired IDS device detects the attack and sends shun requests to Cisco wireless LAN controllers, which will then disassociate the client device. Autonomous or unified Cisco Aironet 1240AG Series Access Points support management frame protection for the authentication of 802.11 management frames by - Cisco AIR-LAP1242AG-A-K9 | Data Sheet - Page 3
connectors support a variety of Cisco 2.4-GHz and 5-GHz antennas, providing range and coverage versatility. Autonomous access points can function as an access point or bridge, whether set up as a single-band or dual-band platform, allowing each radio to be individually configured as an access point - Cisco AIR-LAP1242AG-A-K9 | Data Sheet - Page 4
2 lists the product specifications for Cisco Aironet 1240AG Series Access Points. Table 2. Product Specifications for Cisco Aironet 1240AG Series Access Points Item Part Number Software Data Rates Supported Network Standard Uplink Specification AIR-AP1242AG-x-K9 AIR-LAP1242AG-x-K9 Regulatory - Cisco AIR-LAP1242AG-A-K9 | Data Sheet - Page 5
Data Sheet Item Frequency Band and Operating domains support different numbers of 802.11a channels) FCC currently supports 12 non-overlapping channels, with potentially up to 23 channels via a future firmware release are Copyright © 1992-2006 Cisco Systems, Inc. All rights reserved. This document is - Cisco AIR-LAP1242AG-A-K9 | Data Sheet - Page 6
Data Sheet Item Available Transmit Power Settings (Maximum Power 2 Mbps 950 ft (290 m) at 1 Mbps Measured with 2.2-dBi dipole antenna for 2.4 GHz, and 3.5-dBi omnidirectional antenna for 5 GHz. Standards Safety: UL 60950-1 CAN/CSA-C22.2 No. Cisco Systems, Inc. All rights reserved. This document is - Cisco AIR-LAP1242AG-A-K9 | Data Sheet - Page 7
of supporting 13W or greater Cisco Aironet power injectors (PWRINJ3 and PWRINJ-FIB) Third-party PoE devices (must meet input power and power draw requirements) 12.95W maximum Note: 12.95W is the maximum power required at the powered device. If the access point is being used in a PoE configuration - Cisco AIR-LAP1242AG-A-K9 | Data Sheet - Page 8
Data Sheet All contents are Copyright © 1992-2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 8 of 9 - Cisco AIR-LAP1242AG-A-K9 | Data Sheet - Page 9
for Cisco Aironet 1240AG Series Access Points Part Number AIR-AP1242AG-A-K9 AIR-AP1242AG-C-K9 AIR-AP1242AG-E-K9 AIR-AP1242AG-I-K9 AIR-AP1242AG-J-K9 AIR-AP1242AG-K-K9 AIR-AP1242AG-N-K9 AIR-AP1242AG-P-K9 AIR-AP1242AG-S-K9 AIR-AP1242AG-T-K9 AIR-LAP1242AG-A-K9 AIR-LAP1242AG-C-K9 AIR-LAP1242AG-E-K9 AIR - Cisco AIR-LAP1242AG-A-K9 | Data Sheet - Page 10
Data Sheet Printed in USA All contents are Copyright © 1992-2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. C78-338896-04 12/06 Page 10 of 9
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
Data Sheet
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 9
Cisco Aironet 1240AG Series 802.11A/B/G Access Point
Cisco
®
Aironet
®
1240AG Series Access Points deliver the versatility, high capacity,
security, and enterprise-class features demanded by WLAN customers. These IEEE
802.11a/b/g access points are designed specifically for challenging RF environments
such as factories, warehouses, and large retail establishments that require the antenna
versatility associated with connectorized antennas, a rugged metal enclosure, and a
broad operating temperature range. The Cisco Aironet 1240AG Series provides local as
well as inline power, including support for IEEE 802.3af Power over Ethernet (PoE).
The Cisco Aironet 1240AG Series is a component of the Cisco Unified Wireless Network, a
comprehensive solution that delivers an integrated, end-to-end wired and wireless network. Using
the radio and network management features of the Cisco Unified Wireless Network for simplified
deployment, the Cisco Aironet 1240AG Series extends the security, scalability, reliability, ease of
deployment, and manageability available in wired networks to the wireless LAN.
The Cisco Aironet 1240AG Series is available in two versions: unified or autonomous. Unified
access points operate with the Lightweight Access Point Protocol (LWAPP) and work in
conjunction with Cisco wireless LAN controllers and the Cisco Wireless Control System (WCS).
When configured with LWAPP, the Cisco Aironet 1240AG Series can automatically detect the
best-available Cisco wireless LAN controller and download appropriate policies and configuration
information with no manual intervention. Autonomous access points are based on Cisco IOS
®
Software and may optionally operate with the CiscoWorks Wireless LAN Solution Engine (WLSE).
Autonomous access points, along with the CiscoWorks WLSE, deliver a core set of features and
may be field-upgraded to take advantage of the full benefits of the Cisco Unified Wireless Network
as requirements evolve.