Cisco ASR1006 Hardware Installation Guide - Page 119
-Port Channelized T3/E3 ATM CEoP SPA Overview
UPC - 882658196423
View all Cisco ASR1006 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 119 highlights
Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs 2-Port Channelized T3/E3 ATM CEoP SPA Overview 2-Port Channelized T3/E3 ATM CEoP SPA Overview The following sections describe the 2-Port Channelized T3/E3 ATM CEoP SPA: • 2-Port Channelized T3/E3 ATM CEoP SPA LEDs • 2-Port Channelized T3/E3 ATM CEoP SPA Interface Specifications • 2-Port Channelized T3/E3 ATM CEoP SPA Cables and Connectors 2-Port Channelized T3/E3 ATM CEoP SPA LEDs The 2-Port Channelized T3/E3 ATM CEoP SPA has three types of LEDs (see Figure 3-52). There are two LEDs for each port on the SPA, and a single STATUS LED for the SPA. Figure 3-52 2-Port Channelized T3/E3 ATM CEoP SPA Faceplate 4 3 0 C/A 1 C/A A/L A/L TX RX TX RX 12 STATUS SPA-2CHT3-CE-ATM 5 1 TX (Transmit) connector 2 RX (Receive) connector 3 C/A (Carrier/Alarm) LED 4 A/L (Active/Loopback) 5 STATUS LED The 2-Port Channelized T3/E3 ATM CEoP SPA LEDs are described in Table 3-50. Table 3-50 2-Port Channelized T3/E3 ATM CEoP SPA LEDs LED Label C/A A/L STATUS Color Off Green Amber Off Green Amber Off Amber Green State Off On On Off On On Off On On Meaning Port is not enabled by software. Port is enabled by software. Port is enabled by software and there is at least one alarm. Port is not enabled by software. Port is enabled by software, loopback is off. Port is enabled by software, loopback is on. SPA power is off. SPA power is on and the SPA is being configured. SPA is ready and operational. 250287 OL-14126-12 Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-77