Cisco ASR1006 Hardware Installation Guide - Page 83

-Port OC-48c/STM-16 POS SPA Optical Transceiver Modules, Connectors, and Cables

Page 83 highlights

Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs 2-Port and 4-Port OC-48c/STM-16 POS SPA Overview The 1-Port OC-48c/STM-16 POS SPA interface is compliant with the following RFCs: • RFC 1662, PPP in HDLC-like Framing • RFC 2615, PPP over SONET/SDH 1-Port OC-48c/STM-16 POS SPA Optical Transceiver Modules, Connectors, and Cables The 1-Port OC-48c/STM-16 POS SPA uses a single-mode, 9.95 Gbps, OC-48 optical fiber (SONET STS-48) optical transceiver module for SONET connection to the network. The 1-Port OC-48c/STM-16 POS SPA supports the following types of optical transceiver modules: • Single-mode short-reach (SR) SFP module-SFP-OC48-SR • Single-mode intermediate-reach (IR) SFP module-SFP-OC48-IR1 • Single-mode long-reach (LR) SFP module-SFP-OC48-LR2 Use a single-mode optical fiber that has a modal-field diameter of 8.7 ±0.5 microns (nominal diameter is approximately 10/125 microns) to connect your router to a network. Figure 3-26 shows the cable type for use with the XFP optical transceiver module on the 1-Port OC-48c/STM-16 POS SPA. Figure 3-26 LC-Type Cable for the SFP Optical Transceiver Modules / / / / / / 84929 RX TX Note The 40-pin connector on the 1-Port OC-48c/STM-16 POS SPA is used for resilient packet ring (RPR) connections. 2-Port and 4-Port OC-48c/STM-16 POS SPA Overview The following sections describe the 2-Port and 4-Port OC-48c/STM-16 POS SPA: • 2-Port and 4-Port OC-48c/STM-16 POS SPA LEDs, page 3-42 • 2-Port and 4-Port OC-48c/STM-16 POS SPA Interface Specifications, page 3-43 • 2-Port and 4-Port OC-48c/STM-16 POS SPA Cables, Optical Transceiver Modules, and Connectors, page 3-43 OL-14126-12 Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide 3-41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188

3-41
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
OL-14126-12
Chapter 3
Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs
2-Port and 4-Port OC-48c/STM-16 POS SPA Overview
The 1-Port OC-48c/STM-16 POS SPA interface is compliant with the following RFCs:
RFC 1662,
PPP in HDLC-like Framing
RFC 2615,
PPP over SONET/SDH
1-Port OC-48c/STM-16 POS SPA Optical Transceiver Modules, Connectors, and
Cables
The 1-Port OC-48c/STM-16 POS SPA uses a single-mode, 9.95 Gbps, OC-48 optical fiber (SONET
STS-48) optical transceiver module for SONET connection to the network.
The 1-Port OC-48c/STM-16 POS SPA supports the following types of optical transceiver modules:
Single-mode short-reach (SR) SFP module—SFP-OC48-SR
Single-mode intermediate-reach (IR) SFP module—SFP-OC48-IR1
Single-mode long-reach (LR) SFP module—SFP-OC48-LR2
Use a single-mode optical fiber that has a modal-field diameter of 8.7 ±0.5 microns (nominal diameter
is approximately 10/125 microns) to connect your router to a network.
Figure 3-26
shows the cable type for use with the XFP optical transceiver module on the
1-Port OC-48c/STM-16 POS SPA.
Figure 3-26
LC-Type Cable for the SFP Optical Transceiver Modules
Note
The 40-pin connector on the 1-Port OC-48c/STM-16 POS SPA is used for resilient packet ring (RPR)
connections.
2-Port and 4-Port OC-48c/STM-16 POS SPA Overview
The following sections describe the 2-Port and 4-Port OC-48c/STM-16 POS SPA:
2-Port and 4-Port OC-48c/STM-16 POS SPA LEDs, page 3-42
2-Port and 4-Port OC-48c/STM-16 POS SPA Interface Specifications, page 3-43
2-Port
and 4-Port
OC-48c/STM-16 POS SPA Cables, Optical Transceiver Modules, and Connectors,
page 3-43
/ /
/ /
/ /
TX
RX
84929