Cisco ASR1006 Hardware Installation Guide - Page 96

OC-192 Module Connections

Page 96 highlights

1-Port OC-192c/STM-64 POS/RPR XFP SPA Overview Chapter 3 Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs The 1-Port OC-192c/STM-64 POS/RPR XFP SPA supports the following types of optical transceiver modules: • Single-mode short-reach (SR) XFP module-XFP-10GLR-OC192SR • Single-mode intermediate-reach (IR) XFP module-XFP-10GER-OC192IR • Single-mode very-long reach (LR) XFP module-XFP-10GZR-OC192LR Cisco Systems qualifies the optics that are approved for use with its SPAs. Use a single-mode optical fiber that has a modal-field diameter of 8.7 ±0.5 microns (nominal diameter is approximately 10/125 microns) to connect your router to a network. Figure 3-36 shows the cable type for use with the XFP optical transceiver module on the 1-Port OC-192c/STM-64 POS/RPR XFP SPA. Figure 3-36 LC-Type Cable for the XFP Optical Transceiver Modules / / / / / / RX TX 84929 OC-192 Module Connections Table 3-32 shows the OC-192 specifications for use with the 1-Port OC-192c/STM-64 POS/RPR XFP SPA. Table 3-32 OC-192 Specifications Specification Wavelength Cabling distance (maximum) Operating case temperature range Tx power Receiver sensitivity (maximum) Description OC-192 SR-1: 1290 nm to 1330 nm OC-192 IR-2: 1530 nm to 1565 nm OC-192 LR-2: 1530 nm to 1565 nm OC-192 SR-1: 2 km (1.2 miles) OC-192 IR-2: 40 km (24.8 miles) OC-192 LR-2: 50 miles (80 km) OC-192 SR-1: 23 to 158o F (-5 to 70o C) OC-192 IR-2: 23 to 158o F (-5 to 70o C) OC-192 LR-2: 23 to 158o F (-5 to 70o C) OC-192 SR-1: -6 dBm -1 dBm OC-192 IR-2: -1 dBm +2 dBm OC-192 LR-2: 0 to +4 dBm OC-192 SR-1: -11 dBm OC-192 IR-2: -14 dBm OC-192 LR-2: -24 dBm 3-54 Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide OL-14126-12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188

3-54
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Hardware Installation Guide
OL-14126-12
Chapter 3
Overview: Cisco ASR 1000 Series Aggregation Services Routers SPAs
1-Port OC-192c/STM-64 POS/RPR XFP SPA Overview
The 1-Port OC-192c/STM-64 POS/RPR XFP SPA supports the following types of optical transceiver
modules:
Single-mode short-reach (SR) XFP module—XFP-10GLR-OC192SR
Single-mode intermediate-reach (IR) XFP module—XFP-10GER-OC192IR
Single-mode very-long reach (LR) XFP module—XFP-10GZR-OC192LR
Cisco Systems qualifies the optics that are approved for use with its SPAs.
Use a single-mode optical fiber that has a modal-field diameter of 8.7 ±0.5 microns (nominal diameter
is approximately 10/125 microns) to connect your router to a network.
Figure 3-36
shows the cable type for use with the XFP optical transceiver module on the 1-Port
OC-192c/STM-64 POS/RPR XFP SPA.
Figure 3-36
LC-Type Cable for the XFP Optical Transceiver Modules
OC-192 Module Connections
Table 3-32
shows the OC-192 specifications for use with the 1-Port OC-192c/STM-64 POS/RPR XFP
SPA.
/ /
/ /
/ /
TX
RX
84929
Table 3-32
OC-192 Specifications
Specification
Description
Wavelength
OC-192 SR-1: 1290 nm to 1330 nm
OC-192 IR-2: 1530 nm to 1565 nm
OC-192 LR-2: 1530 nm to 1565 nm
Cabling distance (maximum)
OC-192 SR-1: 2 km (1.2 miles)
OC-192 IR-2: 40 km (24.8 miles)
OC-192 LR-2: 50 miles (80 km)
Operating case temperature range
OC-192 SR-1: 23 to 158
o
F (–5 to 70
o
C)
OC-192 IR-2: 23 to 158
o
F (–5 to 70
o
C)
OC-192 LR-2: 23 to 158
o
F (–5 to 70
o
C)
Tx power
OC-192 SR-1: –6 dBm –1 dBm
OC-192 IR-2: –1 dBm +2 dBm
OC-192 LR-2: 0 to +4 dBm
Receiver sensitivity (maximum)
OC-192 SR-1: –11 dBm
OC-192 IR-2: –14 dBm
OC-192 LR-2: –24 dBm