Cisco E4200 User Guide - Page 20
RADIUS, Disabled, RADIUS Server, RADIUS Port, Shared Secret, Encryption, Passphrase, Key 1-4, TX Key - router ip address
View all Cisco E4200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Linksys E4200 RADIUS This option features WEP used in coordination with a RADIUS server. (This should only be used when a RADIUS server is connected to the router.) NOTE: If you select RADIUS as your Security Mode, each device in your wireless network MUST use RADIUS and the same encryption and shared key. Chapter 2: Advanced Configuration Disabled If you choose to disable wireless security, you will be informed that wireless security is disabled when you first attempt to access the Internet. You will given the option to enable wireless security, or confirm that you understand the risks but still wish to proceed without wireless security. NOTE: When wireless security is disabled, anyone can access your wireless network at any time. Wireless Security > Disabled Wireless Security > RADIUS RADIUS Server Enter the IP address of the RADIUS server. RADIUS Port Enter the port number of the RADIUS server. The default is 1812. Shared Secret Enter the key shared between the router and the server. Encryption Select a level of WEP encryption, (40/64-bit 10 hex digits) or 104/128-bit (26 hex digits). The default is 40/64-bit (10 hex digits). Passphrase Enter a passphrase to automatically generate WEP keys. Then click Generate. Key 1-4 If you did not enter a passphrase, enter the WEP key(s) manually. TX Key Select a default TX (Transmit) Key to use. The default is 1. Maximum Performance Wireless-N Router 17