Cisco E4200 User Guide - Page 51
Start > Control Panel > Firewall - default username password
View all Cisco E4200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Linksys E4200 6. Your web browser automatically opens. Enter the username and password, and then click OK. (If you copied the password to the Clipboard in step 4, press Ctrl-V to paste it into the Password field.) When you try to log into the browser-based utility, your password does not work. Your wireless security password also serves as the browser‑based utility's login password. To see this password: 1. Open Cisco Connect. 2. On the main menu, click Router settings. 3. The Password is displayed on the left side of the screen. The router does not recognize your USB storage device. Make sure the USB storage device uses the NTFS, FAT, or HSF+ format. To check its format, follow these instructions: 1. Connect the USB storage device directly to your computer. 2. On your desktop, double-click Computer or My Computer icon. 3. Right-click the USB storage device, and click Properties. 4. The format is listed in the File system description. If the format is not NTFS, FAT, or HSF+, then back up the data on the USB storage device. After you have backed up the data on the USB storage drive, you can format it. Windows: Right-click the USB storage device, and click Format. Follow the on-screen instructions. For more information, refer to Windows Help. Mac: Use the Disk Utility. If the router still does not recognize the USB storage device, then remove the power adapter from the router's Power port. Wait five seconds, and then re-connect the power adapter to the router's Power port. In Windows Vista, you do not see the USB storage device in the Network screen. Make sure the router and your computer use the same workgroup name. (The default workgroup name of the router is workgroup. In Windows Vista, right-click the Computer icon and select Properties. Click Advanced system settings. Click the Computer Name tab. The workgroup name is displayed.) If they differ, then change the workgroup name of the router. Follow these instructions: 1. Access the web-based utility of the router. (Refer to "How to Access the Browser-Based Utility" on page 3.) 2. Click the Storage tab. Maximum Performance Wireless-N Router Appendix A: Troubleshooting 3. Click the Administration tab. 4. In the Workgroup Name field, enter the workgroup name of your computer. 5. Click Save Settings. In Windows XP, you do not see the router in the My Network Places screen. In the Network Tasks section, click Show icons for networked UPnP devices. If the router does not appear, follow these instructions: 1. Go to Start > Control Panel > Firewall. 2. Click the Exceptions tab. 3. Select UPnP Framework. 4. Click OK. In Windows XP, you do not see your USB storage device in the View workgroup computers screen. Make sure the router and your computer use the same workgroup name. (The default workgroup name of the router is workgroup. In Windows XP, go to Start > Control Panel > System. Click the Computer Name tab. The workgroup name is displayed.) If they differ, then change the workgroup name of the router. Follow these instructions: 1. Access the web-based utility of the router. (Refer to "How to Access the Browser-Based Utility" on page 3.) 2. Click the Storage tab. 3. Click the Administration tab. 4. In the Workgroup Name field, enter the workgroup name of your computer. 5. Click Save Settings. Your USB storage device includes two USB connectors. Connect the primary USB connector of the USB storage device to the USB port of the router. If the USB storage device does not work properly (because it requires additional power from the secondary USB connector), then use a different USB storage device with a single USB connector. WEB: If your questions are not addressed here, refer to our Linksys E4200 section on the web, www.linksys.com/support 48