Cisco MDS-9124 Troubleshooting Guide - Page 242

Domain Issues Chapter 11 Troubleshooting VSANs, Domains, and FSPF Send documentation comments to [email protected] Step 4 Step 5 Step 6 If you have the rcf-reject option enabled, use the interface command and then the no fcdomain rcf-reject vsan command in interface mode. Use the fcdomain auto-reconfigure vsan command in the EXEC mode on both switches to enable auto-reconfiguration after a Domain Manager restart. Use the fcdomain restart disruptive vsan command to restart the Domain Manager. CFS Distribution of Domain ID List Fails Symptom CFS distribution of domain ID list fails. Table 11-14 CFS Distribution of Domain ID List Fails Symptom CFS distribution of domain ID list fails. Possible Cause Solution Configured domain ID in remote switch not present in domain ID list. Add all domain IDs in the VSAN to the domain ID list. Choose Fabricxx > VSANxx > Domain Manager > Allowed and select the Allowed DomainIDs tab to view the current allowed domain ID list in Fabric Manager. Choose Fabricxx > VSANxx > Domain Manager and select the Configuration tab to view the existing domain IDs for this VSAN. Choose Fabricxx > VSANxx > Domain Manager > Allowed and select the Allowed DomainIDs tab to add any missing domain IDs, and then click Apply Changes. If CFS is enabled, select the CFS tab and select commit from the ConfigAction drop-down menu and click Apply Changes. Or use the show fcdomain domain-list to view the current allowed domain ID list. Compare this to any other switches in the VSAN to determine what domain IDs are missing. Use the fcdomain allowed CLI command to add any missing domain IDs. 11-22 Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x OL-9285-05