Cisco MDS-9124 Troubleshooting Guide - Page 272

IVR Issues Chapter 13 Troubleshooting IVR Send documentation comments to [email protected] Link Isolated Symptom Link isolated. Table 13-9 Link Isolated Symptom Link isolated. Possible Cause Virtual domain overlap. Internal message payload uses destination ID. Persistent FC ID for IVR Failed Solution Choose Fabricxx > All VSANs > Domain Manager in Fabric Manager to verify a domain overlap. Choose Fabricxx > All VSANs > IVR and select the Action tab in Fabric Manager.Fill in the Create Virtual Domains for VSAN field and click Apply Changes. Select the CFS tab and set ConfigAction to commit, and click Apply Changes. Or use the show fcdomain domain-list CLI command to verify a domain overlap. Use the ivr widthdraw domain CLI command to remove the overlapped domain. Use persistent FC IDs to reassign the overlapped domain. Use the ivr virtual-fcdomain-add vsan-ranges CLI command to add existing and future virtual domains to the domain list for the selected VSANs. Repeat this on all edge VSANs. See the "IVR Network Address Translation Fails" section on page 13-8. Symptom Persistent FC ID for IVR failed. Table 13-10 Persistent FC ID for IVR Failed Symptom Persistent FC ID for IVR failed. Possible Cause Selected virtual FC ID does not match the assigned virtual domain. Solution Use the show ivr fcdomain database CLI command to verify the virtual domain ID. Use the native-autonomous-fabric-num CLI command to assign the virtual domain and then use the pwwn CLI command to map the pWWN to an appropriate FC ID that matches the virtual domain ID. Refer to the Cisco MDS 9000 Family configuration guides for the related procedure to configure Persistent FC IDs for IVR. 13-12 Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x OL-9285-05