Cisco MDS-9124 Troubleshooting Guide - Page 275

Chapter 13 Troubleshooting IVR Troubleshooting the IVR Wizard Send documentation comments to [email protected] Symptom CFS merge failed. Table 13-14 CFS Merge Failed Symptom CFS merge failed. Possible Cause IVR topology incorrect. Maximum number of VSANs or IVR VSAN topology entries reached. Conflicting entries in the AFID database. Conflicting user-configured IVR VSAN topology database entries. Solution Choose Fabricxx > All VSANs > IVR and select the Action tab in Fabric Manager. Check the Auto Discover Topology check box and click Apply Changes. Select the CFS tab and set ConfigAction to commit and click Apply Changes. Or use either the ivr vsan topology auto CLI command to automatically reconfigure the IVR topology, or the ivr vsan topology database CLI command to manually reconfigure the IVR topology. Reconfigure your fabric before merging to reduce the number of VSANs or topology entries. See Appendix C, "Configuration Limits for Cisco MDS SAN-OS Release 3.x." Modify the conflicting entries in the AFID database. Enable IVR auto topology on both fabrics before the merge and remove any user-configured IVR VSAN topology database entries. Troubleshooting the IVR Wizard The IVR wizard in Fabric Manager simplifies the process of configuring IVR across your fabric. The IVR wizard automatically checks for the appropriate Cisco SAN-OS version across the switches in the VSAN and determines which IVR features the switches are capable of. (See Table 13-1.) This section describes the following warning or error dialog boxes that display when you configure IVR using the Fabric Manager IVR wizard: • Warning: Not All Switches Are IVR NAT Capable or Are Unmanageable, page 13-16 • Error: The Following Switches Do Not Have Unique Domain IDs, page 13-16 • Error: Pending Action/ Pending Commits, page 13-17 • Error: Fabric Is Changing. Please Retry the Request Later, page 13-17 OL-9285-05 Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x 13-15