Cisco MDS-9124 Troubleshooting Guide - Page 276

Troubleshooting the IVR Wizard Chapter 13 Troubleshooting IVR Send documentation comments to [email protected] Warning: Not All Switches Are IVR NAT Capable or Are Unmanageable Symptom Warning: Not all switches are IVR NAT capable or are unmanageable. Table 13-15 Not All Switches Are IVR NAT Capable or Are Unmanageable Symptom Warning: Not all switches are IVR NAT capable or are unmanageable. Possible Cause Solution One or more switches in the fabric Upgrade to the Cisco SAN-OS release required for the IVR are not running Cisco MDS SAN-OS features you want to use. See Table 13-1 and Chapter 2, Release 2.1(1a) or later. "Troubleshooting Installs, Upgrades, and Reboots." One or more switches in the fabric cannot communicate with Fabric Manager or are not Cisco SAN-OS switches. Determine if any of the problem switches are required in the IVR topology. If not, ignore this message and proceed with the IVR configuration. If they are required, choose Switches and check the Status column to determine the cause and address the problem. Error: The Following Switches Do Not Have Unique Domain IDs Symptom The following switches do not have unique domain IDs. Table 13-16 The Following Switches Do Not Have Unique Domain IDs Symptom The following switches do not have unique domain IDs. Possible Cause Solution The listed switches have duplicate domain IDs in two or more VSANs in your proposed IVR configuration. Choose Fabricxx > All VSANS > Domain Manager and set the ConfigDomainId to a unique number and set the Config Type drop-down menu to static in Fabric Manager. Set the Restart drop-down menu to disruptive and click Apply Changes. This triggers a disruptive restart to make the running domain ID match the configured domain ID. Use IVR NAT. This may require upgrading to Cisco MDS SAN-OS Release 2.1(1a) or later. 13-16 Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x OL-9285-05