Cisco MDS-9124 Troubleshooting Guide - Page 301

Chapter 14 Troubleshooting Zones and Zone Sets Enhanced Zoning Issues Send documentation comments to [email protected] Resolving Enhanced Zoning Lock Issues with Fabric Manager To resolve a lock failure using Fabric Manager, follow these steps: Step 1 Step 2 Step 3 Choose Fabricxx > VSANxx and select the zone set that you want to configure. Select the Enhanced tab from the Information pane and view the Config DB Locked By column to determine which switch and which user holds the enhanced zoning lock for this VSAN. Check the Config DB Discard Changes check box and click Apply Changes to clear the enhanced zoning lock. Note Verify that no valid configuration change is in progress before you clear a lock. Resolving Enhanced Zoning Lock Issues with the CLI To resolve a lock issue using the CLI, follow these steps: Step 1 Step 2 Step 3 Use the show zone status vsan command to determine the lock holder. If the lock holder is on this switch, the command output shows the user. If the lock holder is on a remote switch, the command output shows the domain ID of the remote switch. switch#show zone status vsan 16 VSAN: 16 default-zone: deny distribute: active only Interop: default mode: enhanced merge-control: allow session: cli [admin]