Cisco MDS-9124 Troubleshooting Guide - Page 437

Chapter 20 Troubleshooting IP Storage Services iSLB Issues Send documentation comments to [email protected] iSLB Zones Not Present in Active Zone Set Symptom iSLB zones not present in active zone set. Table 20-12 iSLB Zones Not Present in Active Zone Set Symptom Possible Cause iSLB zones not Active zone set not configured. present in active zone set. Zone set activation failed. Solution Check if an active zone set is configured. If this is not the case then create and activate a new zone set for the VSAN in question. Then use the islb zoneset activate CLI command to trigger iSLB zoning. If an active zone set is configured, then check for activation failures. See the "Traffic Description After iSLB Commit or Activation of Zone Set" section on page 20-63. Traffic Description After iSLB Commit or Activation of Zone Set Symptom Traffic description after iSLB commit or activation of zone set (normal, IVR, or iSLB). Table 20-13 Traffic Disruption After iSLB Commit or Activation of Zone Set Symptom Possible Cause Solution Traffic description after iSLB commit or activation of zone set (normal, IVR, or iSLB). An iSLB commit must be done from the switch that has IVR configured. Any zone set activation (normal, iSLB, or IVR) must be done from the switch that has IVR configured. Commit the iSLB configuration from a switch that has both IVR and iSLB enabled. Use the islb commit CLI command. Activate the zone set from a switch that has both IVR and iSLB enabled. Use the islb zoneset activate CLI command. OL-9285-05 Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x 20-63