Cisco MDS-9124 Troubleshooting Guide - Page 531

Appendix B Troubleshooting Tools and Methodology Using Cisco MDS 9000 Family Tools Send documentation comments to [email protected] Figure B-3 Switch Health Analysis Window The Switch Health Analysis window displays any problems affecting the selected switches. Analyzing End-to-End Connectivity Select Tools > End to End Connectivity option from Fabric Manager to determine connectivity and routes among devices with the switch fabric. The connectivity tool checks to see that every pair of end devices in an active zone can talk to each other, using a Ping test and by determining if they are in the same VSAN. This option uses versions of the ping and traceroute commands modified for Fibre Channel networks. The End to End Connectivity Analysis window displays the selected end points with the switch to which each is attached, and the source and target ports used to connect it. The output shows all the requests which have failed. The possible descriptions are: • Ignoring empty zone-No requests are issued for this zone. • Ignoring zone with single member-No requests are issued for this zone. • Source/Target are unknown-No nameserver entries exist for the ports or we have not discovered the port during discovery. • Both devices are on the same switch-The devices are not redundantly connected. • No paths exist. • Only one unique path exists. • VSAN does not have an active zone set. • Average time... micro secs-The latency value was more than the threshold supplied. OL-9285-05 Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x B-15