Cisco MDS-9124 Troubleshooting Guide - Page 533

Appendix B Troubleshooting Tools and Methodology Using Cisco MDS 9000 Family Tools Send documentation comments to [email protected] Figure B-5 Zone Merge Analysis Window The Zone Merge Analysis window displays any inconsistencies between the zone configuration of the two selected switches. You can use the following options on the Fabric Manager Tools menu to verify connectivity to a selected object or to open other management tools: • Traceroute-Verify connectivity between two end devices that are currently selected on the Map pane. • Device Manager- Launch Device Manager for the switch selected on the Map pane. • Command Line Interface-Open a Telnet or SSH session for the switch selected on the Map pane. Alerts and Alarms You can configure and monitor SNMP, RMON, Syslog, and Call Home alarms and notifications using the different options on the Device Manager Events menu. SNMP provides a set of preconfigured traps and informs that are automatically generated and sent to the destinations (trap receivers) that you identify. The RMON Threshold Manager lets you configure thresholds for specific events that trigger log entries or notifications. You can use either Fabric Manager or Device Manager to identify Syslog servers that will record different events or to configure Call Home, which can alert you through e-mail messages or paging when specific events occur. Device Manager: RMON Threshold Manager Use the options on the Device Manager Events menu to configure and monitor Simple Network Management Protocol (SNMP), Remote Monitor (RMON), Syslog, and Call Home alarms and notifications. SNMP provides a set of preconfigured traps and informs that are automatically generated and sent to the destinations (trap receivers) chosen by the user. OL-9285-05 Cisco MDS 9000 Family Troubleshooting Guide, Release 3.x B-17