Cisco SG102-24 Quick Start Guide - Page 8
Front Panel LEDs, Back Panel, Side Panel, System, Link/Act LED, 100M LED if present - sg 102 24 gigabit
View all Cisco SG102-24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Front Panel LEDs System LED-Lights green when the switch is powered on. Link/Act LED-(Green) Lights when a link between the corresponding port and another device is detected. Flashes when the port is passing traffic. 100M LED (if present)-(Green) Lights and remains lit when another device is connected to the port, is powered on, and a 100 Mbps link is established between the devices. When the LED is off, the connection speed is under 100 Mbps or nothing is cabled to the port. Gigabit LED (if present)-Lights and remains lit when another device is connected to the port, is powered on, and a 1000 Mbps link is established between the devices. When the LED is off, the connection speed is under 1000 Mbps or nothing is cabled to the port. MiniGBIC (if present)-Lights green when a connection is made through the shared RJ-45 port. It flashes green when the connection is active. Back Panel The power port is located on the back panel of the unmanaged rackmount switch. POWER Side Panel The Kensington lock is located on the side panel of the unmanaged rackmount switch. (Only the Cisco SF 100-16, SF 100-24, SG 100-16, or SG 102-24 Unmanaged Rackmount Switch has a lock.) 276580 276581 Cisco Unmanaged Rackmount Switches 7