Cisco SLM2024T-NA Hardware Installation Guide

Cisco SLM2024T-NA Manual

Get Cisco SLM2024T-NA PDF manuals and user guides View all Cisco SLM2024T-NA manuals
Add to My Manuals
Save this manual to your list of manuals

Cisco SLM2024T-NA manual content summary:

  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 1
    Cisco Nexus 2000 Series Hardware Installation Guide August 22, 2012 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 2
    in accordance with the instruction manual, may cause harmful Cisco's installation instructions, it may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device in accordance with the specifications
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 3
    xvii Troubleshooting Guide xvii Obtaining Documentation and Submitting a Service Request xviii Using a Fabric Extender with a Cisco Nexus 5000 Series Switch 1-1 Information About Using a Fabric Extender with a Cisco Nexus 5000 Series Switch 1-1 Cisco Nexus 2248TP-E 1-1 Chassis 1-2 Ports 1-3 Power
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 4
    Tray 1-36 Supported SFP Transceivers 1-37 SFP Transceivers 1-37 SFP+ Copper Cables 1-37 2 C H A P T E R Using a Fabric Extender with a Cisco Nexus 7000 Series Switch 2-1 Information About Using a Fabric Extender with a Cisco Nexus 7000 Series Switch 2-1 Cisco Nexus 2248TP-E FEX 2-2 Ports for the
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 5
    FEX 2-24 Cisco Nexus 2224TP FEX 2-25 Ports for the Cisco Nexus 2224TP FEX 2-27 Power Supplies for the Cisco Nexus 2224TP FEX 2-27 Fan Tray for the Cisco Nexus 2224TP FEX 2-28 Transceivers and Connectors Supported by the Cisco Nexus 2224TP FEX 2-28 Installing a Cisco Nexus 2000 Series Fabric Extender
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 6
    3-22 Repacking the Cisco Nexus 2000 Series Fabric Extender for Return Shipment 3-22 Connecting a Cisco Nexus 2000 Series Fabric Extender 4-1 Preparing for Network Connections 4-2 Connecting to the 1-Gigabit Ethernet Port 4-2 Connecting to a 10-Gigabit Ethernet Port 4-2 Removing and Installing
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 7
    INDEX SFP+ Copper Transceiver Specifications B-7 Airflow Optimization Accessories B-7 Cable and Port Specifications C-1 Supported Power Cords and Plugs C-1 Power Cords C-1 Jumper Power Cord C-8 LEDs D-1 Chassis and Module LEDs for the Cisco Nexus 2000 Series Fabric Extenders D-1 Chassis and Module
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 8
    Contents Book Title viii 78-xxxxx-xx
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 9
    This guide is organized as follows: Chapter and Title Description Chapter 1, "Using a Fabric Extender Provides an overview of the Cisco Nexus 2000 Series Fabric with a Cisco Nexus 5000 Series Extenders and their components as used with the Cisco Nexus Switch" 5000 Series switches. Chapter
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 10
    . Lists cable and port specifications for the Cisco Nexus 2000 Series Fabric Extenders. Describes the conditions indicated by the chassis and module LEDs on the Cisco Nexus 2000 Series Fabric Extenders. Provides troubleshooting information for the Cisco Nexus 2000 Series Fabric Extenders. Lists
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 11
    locate its translation in the translated safety warnings that accompanied this device. Statement 1071 SAVE THESE INSTRUCTIONS qui accompagnent cet appareil, référez-vous au numéro de l'instruction situé à la fin de chaque AUF. OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide xi
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 12
    änd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning. SPARA DESSA ANVISNINGAR Cisco Nexus 2000 Series Hardware Installation Guide xii OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 13
    Preface OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide xiii
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 14
    åelse af ulykker. Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed. GEM DISSE ANVISNINGER Cisco Nexus 2000 Series Hardware Installation Guide xiv OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 15
    Preface OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide xv
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 16
    Guide Cisco Nexus 5000 Series NX-OS Layer 2 Switching Configuration Guide Cisco Nexus 5000 Series NX-OS Multicast Routing Configuration Guide Cisco Nexus 5000 Series NX-OS Quality of Service Configuration Guide Cisco Nexus 5000 Series NX-OS SAN Switching Configuration Guide Cisco Nexus 5000 Series
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 17
    Technical References Cisco Nexus 5000 Series and Cisco Nexus 2000 Series Fabric Extender MIBs Reference Error and System Messages Cisco NX-OS System Messages Reference Troubleshooting Guide Cisco Nexus 5000 Troubleshooting Guide OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide xvii
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 18
    in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS Version 2.0. xviii Cisco Nexus 2000 Series Hardware Installation Guide OL
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 19
    on the parent Cisco Nexus 5000 Series switch with a single point of management. Cisco Nexus 2248TP-E The Cisco Nexus 2248TP-E is a stackable 1 RU 17.2-inch (45 cm) deep FEX that supports 48 1000-TX host-facing (downlink) ports and 4 10-Gigabit SFP+ network-facing (uplink) ports. You can order
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 20
    1-2 shows the location of components found on the rear of the chassis. For information on what the chassis and component LEDs indicate, see Table D-1 on page D-2. Figure 1-1 Front View of the Cisco Nexus 2248TP-E Chassis 1 2 34 Cisco Nexus 2000 Series Hardware Installation Guide 1-2 239288 OL
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 21
    a total of 48 100/1000BASE-T ports and four 10-Gigabit Ethernet uplinks (SFP+). It provides two types of ports: host-facing downlink ports and network-facing uplink ports. Uplink ports are colored with yellow for connectivity to the upstream parent Cisco Nexus 5000 Series switch. Power Supplies The
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 22
    a Fabric Extender with a Cisco Nexus 5000 Series Switch Table 1-1 Power Supplies for the Cisco Nexus 2200 Platform Chassis Power back-to-front airflow. Figure 1-3 AC Power Supply with Front-to-Back Airflow for the Cisco Nexus 2200 Platform Chassis 1 2 3 5 4 1 Handle 2 FAIL (top) and OK
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 23
    with a Cisco Nexus 5000 Series Switch Cisco Nexus 2248TP-E Figure 1-4 AC Power Supply with Back-to-Front Airflow for the Cisco Nexus 2200 Platform to-front airflow) 5 AC power receptacle Figure 1-5 DC Power Supply for the Cisco Nexus 2200 Platform Chassis 2 3 1 5 4 1 Handle 2 FAIL (left
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 24
    -E Chapter 1 Using a Fabric Extender with a Cisco Nexus 5000 Series Switch Figure 1-6 DC Power Supply with Back-to-Front Airflow for the Cisco Nexus 2200 Platform Chassis A220 P C-400 2 shows a blank power supply filler panel. Cisco Nexus 2000 Series Hardware Installation Guide 1-6 OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 25
    Nexus 5000 Series Switch Cisco Nexus 2248TP-E Figure 1-7 Blank Power Supply Filler Panel for the Cisco Nexus 2200 Platform Chassis 239290 1 2 Fan Trays 1 Handle 2 Ejector latch For power supply specifications, see the "Power Specifications" section on page B-1. To replace a power supply
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 26
    a Fabric Extender with a Cisco Nexus 5000 Series Switch Figure 1-8 Front-to-Back Airflow Fan Tray Components for the Cisco Nexus 2248TP-E and 2224TP FEXs -Front Airflow Fan Tray for the Cisco Nexus 2248TP-E FEX 1 2 3 1 Cisco Nexus 2000 Series Hardware Installation Guide 1-8 239934 OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 27
    FEX. Table 1-3 SFP Transceivers for the Cisco Nexus 2248TP-E FEX Model N2200 FET SFP-10-Gigabit -SR SFP-10-Gigabit -LR Description 10-Gigabit Ethernet for connections with a Cisco Nexus 5000 Series switch 10-Gigabit Ethernet-short range SFP+ module 10-Gigabit Ethernet-long range SFP+ module SFP
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 28
    Chapter 1 Using a Fabric Extender with a Cisco Nexus 5000 Series Switch Cisco Nexus 2248TP The Cisco Nexus 2248TP is a stackable 1 RU 17.2-inch (45 cm) deep FEX that supports 48 1000-TX host-facing (downlink) ports and 4 10-Gigabit SFP+ network-facing (uplink) ports. You can order it with front-to
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 29
    shown) 4 Status (top) and ID (bottom) LEDs Figure 1-11 Rear View of the Cisco Nexus 2248TP Chassis 1 2 3 4 1 Status (top) and ID (bottom) LEDs 2 HDMI port 3 100/1000 downlink ports (48) 4 SFP+ uplink ports (four) 239287 OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide 1-11
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 30
    Extender with a Cisco Nexus 5000 Series Switch Ports The Cisco Nexus 2248TP FEX supports a total of 48 100/1000BASE-T ports and four, 10-Gigabit Ethernet uplinks (SFP+). It provides two types of ports: host-facing downlink ports and network-facing uplink ports. Uplink ports are differentiated with
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 31
    a Fabric Extender with a Cisco Nexus 5000 Series Switch Cisco Nexus 2248TP 1 Handle 2 OK (top) and FAULT (bottom) LEDs 3 Ejector latch 4 No black stripe (front-to-back airflow) 5 AC power receptacle Figure 1-13 AC Power Supply with Back-to-Front Airflow for the Cisco Nexus 2200 Platform Chassis
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 32
    aisle, the switch can reach specifications, see the "Power Specifications" section on page B-1. To replace a power supply, see the "Removing and Installing Power Supplies" section on page 3-17. For LED descriptions, see Table D-1 on page D-2. 1-14 Cisco Nexus 2000 Series Hardware Installation Guide
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 33
    Cisco Nexus 5000 Series Switch Cisco Nexus 2248TP Fan Tray The Cisco can use with the Cisco Nexus 2248TP and 2224TP chassis. Table 1-6 Fan Trays for the Cisco Nexus 2248TP and 2224TP 1-16 Front-to-Back Airflow Fan Tray Components for the Cisco Nexus 2248TP and 2224TP FEXs 1 2 3 1 1 Captive screws
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 34
    Model N2200 FET SFP-10-Gigabit -SR SFP-10-Gigabit -LR Description 10-Gigabit Ethernet for connections with a Cisco Nexus 5000 Series switch 10-Gigabit Ethernet-short range SFP+ module 10-Gigabit Ethernet-long range SFP+ module 1-16 Cisco Nexus 2000 Series Hardware Installation Guide OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 35
    19-inch (48.26 cm) rack and supports vertical orientation. All of the switch ports at the rear of the chassis are in close proximity to server ports, and all user-serviceable components are accessible from the front panel. OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide 1-17
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 36
    10GE Chapter 1 Using a Fabric Extender with a Cisco Nexus 5000 Series Switch You can order it with front-to-back or back-to-front airflow. Figure 1-18 shows the location of the components on the front of the chassis, and Figure 1-19 shows the location of components on the rear of the chassis. For
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 37
    a Cisco Nexus 5000 Series Switch Cisco Nexus 2232TM-10GE, Cisco NexusN2K-C2232TM-E-10GE Figure 1-19 Rear View of the Cisco Nexus 2232TM Chassis Ports 330056 1 2 3 1 Status and ID LEDs 2 HDMI port 4 3 10-Gigabit Base-T host-facing (downlink) ports (32) 4 10-Gigabit SFP+ ports (8) The Cisco
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 38
    Extender with a Cisco Nexus 5000 Series Switch Figure 1-20 Ports Located on the Rear of the Cisco Nexus 2232TM-10GE Chassis 1 2 3 4 330057 1 Status (top) and ID (bottom) LEDs 2 HDMI Connector 3 32 10-Gigabit BaseT host ports 4 8 10-Gigabit SFP+ ports Power Supplies The Cisco Nexus 2232TM
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 39
    Cisco Nexus 5000 Series Switch Cisco Nexus 2232TM-10GE, Cisco NexusN2K-C2232TM-E-10GE Fan Trays For power supply specifications, see Table B-1 on page B-2. To replace Table 1-10 Fan Trays for the Cisco Nexus Front-to-Back Airflow Fan Tray for the Cisco Nexus 2232TM-10GE FEX 1 3 2 4 1 1
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 40
    2232TM-10GE FEX Model N2200 FET SFP-10G-SR SFP-10G-LR Description 10-Gigabit Ethernet for connections with a Cisco Nexus 5000 Series switch 10-Gigabit Ethernet-short range SFP+ module 10-Gigabit Ethernet-long range SFP+ module 1-22 Cisco Nexus 2000 Series Hardware Installation Guide OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 41
    (downlink) ports and 8 10-Gigabit SFP+ network-facing (uplink) ports. You can order it with front-to-back or back-to-front air cooling, which makes this FEX compatible with hot-aisle, cold aisle data center designs. You can use this FEX with the Cisco Nexus 5000 Series switch. The Cisco Nexus 2232PP
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 42
    1 Using a Fabric Extender with a Cisco Nexus 5000 Series Switch Chassis The Cisco Nexus 2232PP FEX chassis has a height of 1.72 inches (4.37 cm), a width of 17.3 inches (43.94 cm), and a depth of 17.7 inches (44.96 cm). It weighs 18.3 pounds (8.3 kg) and supports vertical orientation. Its one-rack
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 43
    Series Switch Figure 1-24 Rear View of the Cisco Nexus 2232PP Chassis Cisco Nexus 2232PP 1 2 3 4 239278 1 Status and ID LEDs 2 HDMI port 3 10-Gigabit Ethernet/FCoE Data ports (32) 4 10-Gigabit Ethernet/FCoE uplink ports (8) Ports The Cisco Nexus 2232PP FEX supports a total of 32 10-Gigabit
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 44
    Cisco Nexus 5000 Series Switch Table 1-13 Power Supplies for the Cisco specifications, see Table B-1 on page B-2. To replace a power supply, see the "Removing and Installing Power Supplies" section on page 3-17. Fan Trays The Cisco Cisco Nexus 2000 Series Hardware Installation Guide OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 45
    Cisco Nexus 5000 Series Switch Cisco Nexus 2232PP Figure 1-25 Front-to-Back Airflow Fan Tray for the Cisco replace a fan tray, see the "Removing and Installing the Fan Tray" section on page 3-20. For LED descriptions, see Table D-1 on page D-2. Cisco Nexus 2000 Series Hardware Installation Guide
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 46
    Series Switch Supported SFP+ Transceivers The Cisco Nexus 2232PP Series FEX supports SFP+ Ethernet transceivers. This section includes the following topics: • SFP Transceivers, page 1-37 • SFP+ Copper Cables, page 1-37 SFP+ Transceivers The enhanced Small-Form-Factor Pluggable (SFP+) 10-Gigabit
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 47
    Using a Fabric Extender with a Cisco Nexus 5000 Series Switch Cisco Nexus 2224TP Cisco Nexus 2224TP The Cisco Nexus 2224TP is a stackable 1 RU FEX. This FEX is very similar to the Cisco Nexus 2248TP except that it has 24 100/1000BASE-T downlink ports, 2 SFP+ uplink ports and you can order it with
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 48
    FEX supports a total of 24 100/1000BASE-T downlink ports and two SFP+ uplink ports on the rear panel. There is an HDMI port on the rear panel for console and management port connectivity. Uplink ports are colored yellow for connectivity to the upstream parent Cisco Nexus 5000 Series switch. Power
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 49
    Extender with a Cisco Nexus 5000 Series Switch Cisco Nexus 2224TP Table 1-17 Power Supplies for the Cisco Nexus 2224TP FEX supply specifications, see Table B-1 on page B-2. To replace a power supply, see the "Removing and Installing Power Supplies" section on page 3-17. Fan Tray The Cisco
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 50
    Nexus 2224TP FEX Model N2200 FET SFP-10G-SR SFP-10G-LR Description 10-Gigabit Ethernet for connections with a Cisco Nexus 5000 Series switch 10-Gigabit Ethernet-short range SFP+ module 10-Gigabit Ethernet-long range SFP+ module SFP+ Copper Cables Copper interface cables are available for use
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 51
    : • Forty-eight 1-Gigabit Ethernet ports • Four 10-Gigabit Ethernet ports • Redundant (dual) 200-W modular, hot-swappable power supplies with a power switch on each supply • Removable fan tray with redundant fans. The fan tray can be removed for hot swapping. If it is not replaced within 60 seconds
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 52
    Nexus 2148T FEX. Figure 1-30 Rear View of the Cisco Nexus 2148T FEX 273916 1 2 3 4 1 System status (top) and Beacon (bottom) LED 3 1-Gigabit Ethernet downlink ports (48) 2 HDMI port 4 10-Gigabit Ethernet uplink ports (4) 1-34 Cisco Nexus 2000 Series Hardware Installation Guide OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 53
    5000 Series Switch Cisco Nexus 2148T Ports Each port on the Cisco Nexus 2148T FEX is numbered, and groups of ports are numbered based on their function. The ports are numbered from top to bottom and left to right. Group 1 includes 48 1-Gigabit Ethernet data ports. Group 2 includes four 10-Gigabit
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 54
    that has front-to-back airflow. Figure 1-34 shows the fan tray. The fan tray is hot-swappable as long as you replace it within 60 seconds. Figure 1-34 Front-to-Back Airflow Fan Tray for Cisco Nexus 2148T FEX 1 2 3 1 1-36 Cisco Nexus 2000 Series Hardware Installation Guide 239291 OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 55
    Cisco Nexus 2148T FEX Model SFP-H10GB-CU1M SFP-H10GB-CU3M SFP-H10GB-CU5M Description 10-Gigabit BASE-CU SFP+ Passive Cable (1 meter) 10-Gigabit BASE-CU SFP+ Passive Cable (3 meters) 10-Gigabit BASE-CU SFP+ Passive Cable (5 meters) OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 56
    Nexus 5000 Series Switch Table 1-22 Copper Cables Used with the Cisco Nexus 2148T FEX Model SFP-H10GB-CU7MA SFP-H10GB-CU10MA Description 10-Gigabit BASE-CU SFP+ Active Cable (7 meters) 10-Gigabit BASE-CU SFP+ Active Cable (10 meters) 1-38 Cisco Nexus 2000 Series Hardware Installation Guide OL
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 57
    100/1000 Ethernet or 1- and 10-Gigabit Ethernet downlinks. You connect a FEX uplink port to the Cisco Nexus 7000 Series switch through one of the following Ethernet I/O modules installed in the switch: • F2 Series 48-port 1 or 10-Gigabit Ethernet I/O module (N7K-F248XP-25) • M1 Series 32-port 10
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 58
    Extender with a Cisco Nexus 7000 Series Switch Send documentation comments to [email protected] Cisco Nexus 2248TP-E FEX The Cisco Nexus 2248TP-E FEX (N2K-C2248TP-E) is a stackable 1-RU FEX that has 48 100/1000 Ethernet host-facing (downlink) ports and four 10-Gigabit Ethernet network-facing
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 59
    Figure 2-2 Rear View of the Cisco Nexus 2248TP-E Chassis 1 2 3 239287 4 1 Status (top) and ID (bottom) LEDs 3 100/1000 Ethernet host-facing (downlink) ports (48) 2 HDMI port 4 10-Gigabit Ethernet network-facing (uplink) ports (4) OL-19013-05 Cisco Nexus 2000 Series Hardware Installation
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 60
    36 38 40 42 44 46 48 1 3 2 4 192533 A 100/1000 Ethernet downlink ports, numbered B 10-Gigabit Ethernet uplink ports, numbered 1 1 through 48 through 4 Note For a fully dedicated 10-Gbps bandwidth through a M1 Series 32-port 10-Gigabit Ethernet I/O module (either the N7K-M132XP-12 or
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 61
    Chapter 2 Using a Fabric Extender with a Cisco Nexus 7000 Series Switch Cisco Nexus 2248TP-E FEX • AC power supply has only one power supply. Figure 2-4 AC Power Supply with Front-to-Back Airflow for the Cisco Nexus 2200 Platform 1 Handle 2 FAIL (top) and OK (bottom) LEDs 3 Ejector latch 4
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 62
    Extender with a Cisco Nexus 7000 Series Switch Send documentation comments to [email protected] Figure 2-5 DC Power Supply with Front-to-Back Airflow for the Cisco Nexus 2200 Platform 1 Black stripe (back-to-front airflow) Cisco Nexus 2000 Series Hardware Installation Guide 2-6 OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 63
    Extender with a Cisco Nexus 7000 Series Switch Cisco Nexus 2248TP-E FEX Figure 2-7 Blank Power Supply Filler Panel for a Cisco Nexus 2200 Platform Power Supply Bay 239290 1 2 1 Handle 2 Ejector latch For LED descriptions, see Table D-1 on page D-2. For power supply specifications, see the
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 64
    Nexus 2248TP-E FEX Chapter 2 Using a Fabric Extender with a Cisco Nexus 7000 Series Switch Send documentation comments to [email protected] Figure 2-8 Front-to-Back Airflow Fan Tray for the Cisco Nexus 2000 Series FEX 1 2 3 1 239291 1 Captive screws (2) 3 Status LED 2 No black stripe
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 65
    [10 meters]) - X 100/1000 Mbps Connector Figure 2-10 shows the SFP+ optical transceiver used for uplink connections. For specifications that apply to these optical transceivers, see the "SFP+ Optical Transceiver Specifications" section on page B-6. OL-19013-05 Cisco Nexus 2000 Series Hardware
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 66
    the "SFP+ Copper Transceiver Specifications" section on page B-7. Figure 2-11 SFP+ Copper Transceiver Module 187492 Figure 2-12 identifies the major features of RJ-45 connectors, which are used for the downlink connections. 2-10 Cisco Nexus 2000 Series Hardware Installation Guide OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 67
    Extender with a Cisco Nexus 7000 Series Switch Figure 2-12 RJ-45 Connector Cisco Nexus 2248TP FEX 1 Pin 1 2 Pin 8 Cisco Nexus 2248TP FEX The Cisco Nexus 2248TP FEX is a stackable 1-RU FEX that has 48 100/1000 Ethernet host-facing (downlink) ports and four 10-Gigabit Ethernet network-facing
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 68
    2-14 Rear View of the Cisco Nexus 2248TP Chassis 1 2 3 239287 4 1 Status (top) and ID (bottom) LEDs 3 100/1000 Ethernet host-facing (downlink) ports (48) 2 HDMI port 4 10-Gigabit Ethernet network-facing (uplink) ports (4) 2-12 Cisco Nexus 2000 Series Hardware Installation Guide OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 69
    36 38 40 42 44 46 48 1 3 2 4 192533 A 100/1000 Ethernet downlink ports, numbered B 10-Gigabit Ethernet uplink ports, numbered 1 1 through 48 through 4 Note For a fully dedicated 10-Gbps bandwidth through a M1 Series 32-port 10-Gigabit Ethernet I/O module (either the N7K-M132XP-12 or
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 70
    [10 meters]) - X 100/1000 Mbps Connector Figure 2-10 on page 2-10 shows the SFP+ optical transceiver used for uplink connections. For specifications that apply to these optical transceivers, see the "SFP+ Optical Transceiver Specifications" section on page B-6. 2-14 Cisco Nexus 2000 Series
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 71
    Chapter 2 Using a Fabric Extender with a Cisco Nexus 7000 Series Switch Cisco Nexus 2232TM FEX Figure 2-11 on page 2-10 identifies the major features of the SFP+ copper transceiver and cable used for uplink connections. For the cable specifications that apply to these transceivers, see the "SFP+
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 72
    View of the Cisco Nexus 2232TM Chassis 1 2 3 4 239278 1 Status (top) and ID (bottom) LEDs 3 1- and 10-Gigabit host-facing Ethernet (downlink) ports (48) 2 HDMI port 4 10-Gigabit network-facing Ethernet (uplink) ports (8) 2-16 Cisco Nexus 2000 Series Hardware Installation Guide OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 73
    26 28 30 32 1 3 5 7 2 4 6 8 330042 1 2 1 1- and 10-Gigabit Ethernet downlink ports, 2 10-Gigabit Ethernet uplink ports, numbered 1 numbered 1 through 32 through 8 Note For a fully dedicated 10-Gbps bandwidth through a M1 Series 32-port 10-Gigabit Ethernet I/O module (either the N7K
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 74
    Cisco Nexus 7000 Series Switch Send documentation comments to nexus5kdocs@cisco Cisco Nexus 2248TP-E FEX" section on page 2-4 and the power supply specifications in the "Power Specifications" section on page B-1. To replace -to-Back Airflow Fan Tray for the Cisco Nexus 2232PP and 2232TM FEXs 1 3
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 75
    the following Cisco Nexus 7000 Series switch I/O modules: • F2 Series 48-port 10-Gigabit I/O module (N7K-F248XP-25) • M1 Series 32-port, 10-Gigabit Ethernet I/O module (N7K-M132XP-12) • M1 Series 32-port, 10-Gigabit Ethernet I/O module with XL option (N7K-M132XP-12L) • M2 Series 24-port 10-Gigabit
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 76
    ]) RJ-45 Copper - X 100/1000 Mbps Connector 1. The SFP-H10GB-CUxM transceivers are not supported by the M1 Series 32-port 10-Gigabit Ethernet I/O module (N7K-M132XP-12). These transceivers are supported by the other Cisco Nexus 7000 Series I/O modules. Figure 2-10 on page 2-10 shows the major
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 77
    and ID (bottom) LEDs The rear of the Cisco Nexus 2232PP FEX has 32 1- and 10-Gigabit Ethernet downlink SFP or SFP+ ports, eight 10-Gigabit Ethernet uplink SFP+ or FET ports, an HDMI port, and two LEDs, as shown in Figure 2-22. OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide 2-21
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 78
    a Cisco Nexus 7000 Series Switch Send documentation comments to [email protected] Figure 2-22 Rear View of the Cisco Nexus 2232PP Chassis 1 2 3 4 239278 1 Status (top) and ID (bottom) LEDs 2 HDMI port 3 1- and 10-Gigabit host-facing Ethernet (downlink) SFP or SFP+ ports (48) 4 10-Gigabit
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 79
    with a Cisco Nexus 7000 Series Switch Cisco Nexus 2232PP FEX 1 1- and 10-Gigabit Ethernet downlink ports, 2 10-Gigabit Ethernet uplink ports, numbered 1 numbered 1 through 32 through 8 Note For a fully dedicated 10-Gbps bandwidth through a M1 Series 32-port 10-Gigabit Ethernet I/O module
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 80
    Cisco Nexus 7000 Series switch I/O modules: • F2 Series 48-port 10-Gigabit I/O module (N7K-F248XP-25) • M1 Series 32-port 10-Gigabit Ethernet I/O module (N7K-M132XP-12) • M1 Series 32-port 10-Gigabit Ethernet I/O module with XL option (N7K-M132XP-12L) • M2 Series 24-port 10-Gigabit I/O module
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 81
    Chapter 2 Using a Fabric Extender with a Cisco Nexus 7000 Series Switch Cisco Nexus 2224TP FEX Figure 2-10 on page 2-10 shows the major features of the SFP+ optical transceiver used for uplink connections. For specifications that apply to these optical transceivers, see the "SFP+ Optical
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 82
    as shown in Figure 2-25. Figure 2-25 Rear View of the Cisco Nexus 2224TP Chassis 1 2 3 4 239280 1 Status (top) and ID (bottom) LEDs 2 HDMI port 2-26 Cisco Nexus 2000 Series Hardware Installation Guide 3 100/1000 Ethernet downlink ports (24) 4 10-Gigabit Ethernet uplink ports (2) OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 83
    16 18 20 22 24 1 2 1 2 330046 1 1- and 10-Gigabit Ethernet downlink ports, 2 10-Gigabit Ethernet uplink ports, numbered 1 numbered 1 through 24 through 2 Note For a fully dedicated 10-Gbps bandwidth through a M1 Series 32-port 10-Gigabit Ethernet I/O module (either the N7K-M132XP-12 or
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 84
    [10 meters]) - X 100/1000 Mbps Connector Figure 2-10 on page 2-10 shows the SFP+ optical transceiver used for uplink connections. For specifications that apply to these optical transceivers, see the "SFP+ Optical Transceiver Specifications" section on page B-6. 2-28 Cisco Nexus 2000 Series
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 85
    Chapter 2 Using a Fabric Extender with a Cisco Nexus 7000 Series Switch Cisco Nexus 2224TP FEX Figure 2-11 on page 2-10 identifies the major features of the SFP+ copper transceiver and cable used for uplink connections. For the cable specifications that apply to these transceivers, see the "SFP+
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 86
    Cisco Nexus 2224TP FEX Chapter 2 Using a Fabric Extender with a Cisco Nexus 7000 Series Switch Send documentation comments to [email protected] 2-30 Cisco Nexus 2000 Series Hardware Installation Guide OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 87
    Before you install, operate, or service the system, read the Regulatory Compliance and Safety Information for the Cisco Nexus 5000 Series Switches and Cisco Nexus 2000 Series Fabric Extenders for important safety information. Warning IMPORTANT SAFETY INSTRUCTIONS This warning symbol means danger
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 88
    purchased separately) For instructions on installing the device using the rack-mount kit shipped with the device, see the "Installing the Cisco Nexus 2000 Series Fabric Extender Chassis in data center to ensure normal operation. Cisco Nexus 2000 Series Hardware Installation Guide 3-2 OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 89
    to an earth ground. • Ensure that the site power meets the power requirements listed in Appendix B, "Technical Specifications." If available, you can use an uninterrupted power supply (UPS) to protect against power failures. OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide 3-3
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 90
    - Captive screws: 4 in-lb - M3 screws: 4 in-lb - M4 screws: 12 in-lb - 10-32 screws: 20 in-lb - 12-24 screws: 30 in-lb Required Tools and Equipment Before beginning the installation metal-to-metal contact with a grounded rack. Cisco Nexus 2000 Series Hardware Installation Guide 3-4 OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 91
    report any discrepancies or damage to your customer service representative. Have the following information ready: • the device to install the Cisco Nexus 2000 Series FEX into a cabinet or rack that meets the requirements described in Appendix Cisco Nexus 2000 Series Hardware Installation Guide 3-5
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 92
    or Rack Send document comments to [email protected] Table 3-1 Quantity 2 12 2 10 10 2 Cisco Nexus 2000 Series FEX Rack-Mount Kit Part Description Rack-mount brackets M4x0.7 x 8-mm Phillips countersunk screws Rack-mount guides 10-32 rack nuts 10-32 x 3/4-inch Phillips pan head screws Slider
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 93
    Cisco Nexus 2000 Series Fabric Extender Installing the Cisco Nexus 2000 Series Fabric Extender Chassis in a Cabinet or Rack Send document comments to [email protected] Step 2 Install the rack-mount guides Figure 3-2. Use two 12-24 screws or two 10-32 screws, depending on the rack rail thread
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 94
    rail. See Figure 3-4. b. Repeat for the front rack-mount bracket on the other side of the device. Figure 3-4 Attaching the Device to the Rack 273926 Cisco Nexus 2000 Series Hardware Installation Guide 3-8 OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 95
    codes. Best grounding recommendations must be closely followed. Commercial building is located in an area where lightning storms frequently occur but is not subject to to high Grounding recommendations must be closely followed. OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide 3-9
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 96
    Grounding recommendations must be closely followed. Electromagnetic noise problems are not anticipated, but installing a grounding system in can occur when modules or other Field Replaceable Units (FRUs) are improperly handled, 3-10 Cisco Nexus 2000 Series Hardware Installation Guide OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 97
    ground lug. See the"Establishing the System Ground" section on page 3-13 for installation instructions and location of the chassis system ground pads. Note You do not need to attach a supplemental the system ground lug barrel. OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide 3-11
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 98
    shows how to attach the ESD wrist strap to the system ground lug screw for the Cisco Nexus 2000 Series FEX. Figure 3-5 Attaching the ESD Wrist Strap to the System Ground Lug Screw 5 1 should be between 1 and 10 megohm (Mohm). 3-12 Cisco Nexus 2000 Series Hardware Installation Guide OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 99
    Series FEX is equipped with AC-input power supplies. Required Tools and Equipment To connect the system ground, you need the following tools and materials: • Grounding lug-A two-hole standard barrel lug that supports wire. OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide 3-13
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 100
    3-6 shows the system ground location on the Cisco Nexus 2000 Series FEX. Warning When installing or replacing the unit, the ground should connect to protective earth ground at the service equipment. Figure 3-6 Location of System Ground on a Cisco Nexus 2000 Series FEX 192530 2 1 3 6 5 4
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 101
    on configuring the device, see the Cisco Nexus 2000 Series Fabric Extender Software Configuration Guide. For instructions on connecting to the console port, see the "Connecting to the 1-Gigabit Ethernet Port" section on page 4-2. Warning When installing or replacing the unit, the ground connection
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 102
    has booted and the device has initialized without error messages. If any problems occur, see Appendix E, "Troubleshooting Hardware Components". If you cannot resolve an issue, contact your customer service representative. 3-16 Cisco Nexus 2000 Series Hardware Installation Guide OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 103
    Cisco Nexus 2000 Series the Cisco Nexus 2000 Series Cisco Nexus 2000 Series FEX supports replace a faulty power supply while the system is operating if the other power supply is functioning. Removing an AC Power Supply Caution If you are using the Cisco Nexus 2000 Series a Cisco Nexus 2148T chassis, loosen
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 104
    ground connection instructions, see the replacement power supply by its handle and position it so that the captive screw is on the left, and then slide it into the power supply bay, ensuring that the power supply is fully seated in the bay. 3-18 Cisco Nexus 2000 Series Hardware Installation Guide
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 105
    it part way out of the chassis. Place your other hand under the power supply to support it while you slide it out of the chassis. Place the power supply on an antistatic second source will most likely still be available. OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide 3-19
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 106
    ground connection has been made for the chassis. For ground connection instructions, see the "Grounding the System" section on page 3-9. If out of the power supply bay. Hold the replacement power supply by the handle and position it so Cisco Nexus 2000 Series Hardware Installation Guide OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 107
    into the chassis as far as it can go until the captive screw makes contact with the chassis. Tighten the captive screw. OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide 3-21
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 108
    . If this problem occurs, contact your customer service representative for a replacement part. Note If you purchased this product through a Cisco reseller, contact the reseller directly for technical support. If you purchased this product directly from Cisco, contact Cisco Technical Support at this
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 109
    a grounded metallic conduit. This chapter includes the following sections: • Preparing for Network Connections, page 4-2 • Connecting to the 1-Gigabit Ethernet Port, page 4-2 • Connecting to a 10-Gigabit Ethernet Port, page 4-2 OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide 4-1
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 110
    10-Gigabit Ethernet Port This section describes how to connect a 10-Gigabit Ethernet port to a host. There are four network facing 10-Gigabit Ethernet ports for the Cisco Nexus 2248GV, 2148T, and 2248TP, eight for the Cisco 4-3 Cisco Nexus 2000 Series Hardware Installation Guide 4-2 OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 111
    Chapter 4 Connecting a Cisco Nexus 2000 Series Fabric Extender Connecting to a 10-Gigabit Ethernet Port Installing an SFP+ Transceiver To install an SFP+ transceiver, follow these steps: Step 1 Step 2 Step 3 Step 4 Attach an ESD-preventive wrist strap and follow its instructions for use. Remove
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 112
    Connecting to a 10-Gigabit Ethernet Port Chapter 4 Connecting a Cisco Nexus 2000 Series Fabric Extender Note If you have difficulty removing a bale SFP+ Transceiver, page 4-5 • Removing a Cable from an SFP+ Transceiver, page 4-5 Cisco Nexus 2000 Series Hardware Installation Guide 4-4 OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 113
    Chapter 4 Connecting a Cisco Nexus 2000 Series Fabric Extender Connecting to a 10-Gigabit Ethernet Port Removing a Cable from an SFP+ instructions on verifying connectivity, see the Cisco Nexus 2000 Series Fabric Extender Software Configuration Guide. OL-19013-05 Cisco Nexus 2000 Series
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 114
    Connecting to a 10-Gigabit Ethernet Port Chapter 4 Connecting a Cisco Nexus 2000 Series Fabric Extender Maintaining SFP+ Transceivers and Cables You must inspect fiber ends under a microscope to determine if damage has occurred. Cisco Nexus 2000 Series Hardware Installation Guide 4-6 OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 115
    -post EIA cabinet or rack, with mounting rails that conform to English universal hole spacing per section 1 of ANSI/EIA-310-D-1992). See the "Requirements Specific to Perforated Cabinets" section on page A-2. OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide A-1
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 116
    and Racks" section on page A-1, perforated cabinets must meet the following requirements: • The front and rear to enhance cooling. The Cisco R Series rack conforms to these requirements. Requirements Specific to Standard Open Racks Cisco Nexus 2000 Series Hardware Installation Guide A-2 OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 117
    above and below the chassis to make it easier to route as many as 56 fiber or copper cables through the rack. OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide A-3
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 118
    Cable Management Guidelines Appendix A Cabinet and Rack Installation Cisco Nexus 2000 Series Hardware Installation Guide A-4 OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 119
    "Cable and Port Specifications." Power Specifications This section describes the power specifications for the Cisco Nexus 2000 Series FEXs. The Table B-1 lists the specifications for the Cisco Nexus 2000 Series FEX power supplies. OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide B-1
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 120
    Power Specifications Appendix B Technical Specifications Table B-1 Power Specifications for the Cisco Nexus 2000 Series Power Supply Cisco Nexus 2000 Series N2K-PAC-200 W N2K-PAC-400W N2K-PAC-400W-B N2K-PDC-400W N2200-PDC-350W-B FEXs Cisco Nexus 2148T Cisco Nexus 2248TP-E, Cisco Nexus
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 121
    Specifications for the Cisco Nexus 2000 Series (continued) Power Supply Cisco Nexus 2000 Series N2K-PAC-200 W N2K-PAC-400W N2K-PAC-400W-B N2K-PDC-400W N2200-PDC-350W-B Output Current 11.5 A/16.7 A (typical/maxim um) Cisco Nexus 2248TP-E: 8 A/10 A (typical/maximum) Cisco Nexus 2248TP: 8 A/10
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 122
    and is within the supply specifications. Supply Health: Green indicates the power supply is operational and amber indicates a fault. Environmental Specifications Table B-2 lists the environmental specifications for a FEX. Cisco Nexus 2000 Series Hardware Installation Guide B-4 OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 123
    to 70°C altitude of 10 to 90 percent noncondensing. Physical Specifications Table B-3 lists the dimensions and weights for the Cisco Nexus 2000 Series FEXs. Table B-3 Physical Specifications for Installing the Cisco Nexus 2000 Series Fabric Extenders Cisco Nexus 2000 Series Dimensions (Height
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 124
    B Technical Specifications Transceiver Specifications This section describes the transceiver specifications for the Cisco Nexus 2000 Series FEX. This section includes the following topics: • SFP+ Optical Transceiver Specifications, page B-6 SFP+ Optical Transceiver Specifications This section
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 125
    B-6 Cable Specifications for the 10-Gbps SFP+ Copper Transceivers Transceiver SFP-H10GB-CU7M SFP-H10GB-CU10M Cable Length 23.0 feet (7 meters) 32.8 feet (10 meters) Airflow Optimization Accessories This section describes the airflow optimization accessories for the Cisco Nexus 2000 Series FEX
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 126
    Airflow Optimization Accessories Appendix B Technical Specifications Cisco Nexus 2000 Series Hardware Installation Guide B-8 OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 127
    Series FEX Description SFS-250V-10A-AR Power Cord, 250 VAC 10 A IRAM 2073 Plug Argentina CAB-9K10A-AU 250 VAC 10 A 3112 Plug, Australia Length Feet 8.2 8.2 Meters 2.5 Power Cord Reference Illustration Figure C-1 2.5 Figure C-2 OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 128
    Power Cords and Plugs Appendix C Cable and Port Specifications Table C-1 AC Power Cords for the Cisco Nexus 2000 Series FEX (continued) Description SFS-250V-10A-CN Power Cord, 250 VAC 10 A GB 2009 Plug China CAB-9K10A-EU Power Cord, 250 VAC 10 A M 2511 Plug Europe SFS-250V-10A-ID Power Cord
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 129
    and Port Specifications Supported Power Cords and Plugs Table C-1 AC Power Cords for the Cisco Nexus 2000 Series FEX AR 2500 mm Plug: EL 219 (IRAM 2073) Cordset rating: 10 A, 250/500 V MAX Length: 8.2 ft Connector: EL 701 (IEC60320/C13) 186571 Figure C-2 CAB-9K10A-AU Cordset rating: 10
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 130
    Supported Power Cords and Plugs Figure C-3 SFS-250V-10A-CN Appendix C Cable and Port Specifications Plug: EL 218 (CCEE GB2009) Cordset rating 10A, 250V (2500 mm) Figure C-4 CAB-9K10A-EU ) Connector: EL 701 186576 187490 Cisco Nexus 2000 Series Hardware Installation Guide C-4 OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 131
    V Length: 8 ft 2 in. (2.5 m) Connector C15M (EN60320/C15 ) Figure C-8 CAB-9K10A-SW 186575 Cordset rating: 10 A, 250 V/500 V MAX Length: 2500mm Plug: EL 210 (BS 1363A) 13 AMP fuse Connector: EL 701C (EN 60320/C15) 186580 OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide C-5
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 132
    (NEMA L6-20) Cordset rating 13A, 250V (6.6 feet) (79±2m) Figure C-11 CAB-N5K6A-NA Connector: EL 701 (IEC60320/C13) Plug: NEMA 6-15P Cordset rating: 10 A, 250 V Length: 8.2 ft Connector: IEC60320/C13 186570 Cisco Nexus 2000 Series Hardware Installation Guide C-6 OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 133
    Appendix C Cable and Port Specifications Figure C-12 CAB-9K12A-NA Supported Power Cords and Plugs Cordset rating 13A, 125V (8.2 feet) (2.5m) Plug: NEMA 5- Plug: EL 208B (IS 6538-1971) Connector EL701B (IEC60320/C13) 192259 OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide C-7
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 134
    Figure C-15 CAB-C13-CBN Appendix C Cable and Port Specifications Plug: SS10A Cordset rating: 10 A,125-250 V Length: 686 mm Connector: HS 10S 192532 Table C-2 lists the AC power cords for the Cisco Nexus 2232TM. Table C-2 AC Power Cords for the Cisco Nexus 2232TM Power Cords CAB-3KX-AC= CAB
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 135
    Appendix C Cable and Port Specifications Figure C-16 CAB-C13-C14-JMPR, Jumper Power Cord Jumper Power Cord Plug: SS10A Cordset rating 10A, 250V (686mm) Connector: HS10S 186569 OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide C-9
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 136
    Jumper Power Cord Appendix C Cable and Port Specifications C-10 Cisco Nexus 2000 Series Hardware Installation Guide OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 137
    Port LEDs, page D-4 Chassis and Module LEDs for the Cisco Nexus 2000 Series Fabric Extenders This section includes the following topics: • Chassis and Module LED Descriptions, page D-2 • Power Supply Status, page D-3 OL-19013-05 Cisco Nexus 2000 Series Fabric Extenders Hardware Installation Guide
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 138
    condition has occurred. The temperature threshold has been exceeded by a small value during environmental monitoring. An overtemperature condition has occurred. The and the power supply is off. Operating normally. Cisco Nexus 2000 Series Fabric Extenders Hardware Installation Guide D-2 OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 139
    LEDs Chassis and Module LEDs for the Cisco Nexus 2000 Series Fabric Extenders Table D-1 Component Port LED LEDs for the Cisco Nexus 2000 Series FEXs (continued) LED Indicates LED status Status Off Solid on (green) Solid on (amber) Blinking (amber) Description The port is not active or the link
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 140
    Fibre Channel or 10-Gigabit Ethernet module. Table D-5 describes the behavior of the port LEDs. Table D-5 Port-Level LEDs Link State Link Down POST failed on port LED State OFF AMBER blinking yellow Notes - - Cisco Nexus 2000 Series Fabric Extenders Hardware Installation Guide D-4 OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 141
    State Administrative disabled AMBER_ON Link Up, port in STP forwarding state GREEN_ON Port LEDs Notes Depending on the product you look at, the LED could be off, or solid amber Blinks based on network activity OL-19013-05 Cisco Nexus 2000 Series Fabric Extenders Hardware Installation Guide D-5
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 142
    Port LEDs Appendix D LEDs Cisco Nexus 2000 Series Fabric Extenders Hardware Installation Guide D-6 OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 143
    Series Fabric Extender (FEX). It includes the following sections: • Overview, page E-1 • SNMP Traps, page E-1 • Device Hardware Guidelines, page E-2 • Contacting Customer Service, page E-3 Overview The key to success when troubleshooting the system hardware is to isolate the problem to a specific
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 144
    Device Hardware Guidelines Appendix E Troubleshooting Hardware Components Device Hardware Guidelines Use the . • The system software boots successfully. See the Cisco Nexus 2000 Series Fabric Extender Software Configuration Guide for information about booting the system and initial configuration
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 145
    information • Brief description of the problem • Brief explanation of the steps that you have already taken to isolate and resolve the problem To contact customer service, go to http://www.cisco.com/en/US/support/index.html OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide E-3
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 146
    Contacting Customer Service Appendix E Troubleshooting Hardware Components Cisco Nexus 2000 Series Hardware Installation Guide E-4 OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 147
    Accessory Kit N2K-C2148T-ACC N2200-ACC-KIT Details Cisco Nexus 2000 FEX 1GE accessory kit, spare Cisco Nexus 2200 FEX accessory kit, spare Note Additional parts can be ordered from your customer service representative. OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide F-5
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 148
    Accessory Kit for Cisco Nexus 2248TP-E, 2224TP, 2232PP, 2248TP, 2232TM, and 2148T Appendix F Accessory Kit Book Title F-6 OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 149
    , page G-4 Note For information about how to query the device for configuration information, see the Cisco Nexus 2000 Switch Configuration Guide. Site Preparation Checklist Planning the location and layout of your equipment rack or wiring closet is essential for successful device operation
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 150
    G Site Preparation and Maintenance Records Send documentation comments to [email protected] Table G-1 Site Planning Checklist Task No. Planning Activity AC source circuit. 2. UPS = uninterruptible power supply. Date Cisco Nexus 2000 Series Hardware Installation Guide G-2 OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 151
    information. Table G-2 Contact and Site Information Contact person Contact phone Contact e-mail Building/site name Data center location Floor location Address (line 1) Address (line 2) City State Zip code Country OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide G-3
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 152
    G Site Preparation and Maintenance Records Send documentation comments to [email protected] Chassis and Module Information Use the following worksheets (see Table supervisor module and the interface module are not removable. Cisco Nexus 2000 Series Hardware Installation Guide G-4 OL-19013-05
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 153
    uplink transceivers 2-9 ports 2-4 power supply 2-4 transceivers 2-9 A AC power supply Cisco Nexus 2148T 1-35 Cisco Nexus 2200 Platform 1-4, 1-5, 1-6, 1-12, 1-13 Cisco Nexus 2224TP 1-30 Cisco Nexus 2232PP 1-25 Cisco Nexus 2248TP 1-3, 1-12 Cisco Nexus 2000 Series Hardware Installation Guide IN-1
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 154
    Nexus 2232PP 1-17, 1-24, 2-21 Cisco Nexus 2232TM 2-15 Cisco Nexus 2248TP 1-2, 1-10, 2-11 Cisco Nexus 2248TP-E 2-2 grounding 3-14 installation guidelines 3-3 installing in a rack (procedure) 3-6 IN-2 Cisco Nexus 2000 Series Hardware Installation Guide lifting 3-3 removing 3-22 removing from rack
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 155
    3-19 replacing 3-19 E EIA shelf bracket 3-2 electrostatic discharge (ESD) prevention guidelines 3-10 environmental specifications B-4 equipment, installation 3-4 Ethernet LEDs description D-4 Ethernet ports connecting 4-2 expansion modules specifications B-5 Cisco Nexus 2000 Series Hardware
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 156
    bracket 3-6 front-to-back airflow Cisco Nexus 2148T 1-33 Cisco Nexus 2224TP 1-29 Cisco Nexus 2232PP 1-24 Cisco Nexus 2248TP 1-2, 1-10, 2-11 Cisco Nexus 2248TP-E 2-2 considerations 3-2 G grounding IN-4 Cisco Nexus 2000 Series Hardware Installation Guide attaching the ESD wrist strap (procedure
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 157
    cabinets requirements A-2 physical specifications B-5 ports Cisco Nexus 2148T 1-35 Cisco Nexus 2224TP 1-30, 2-27 Cisco Nexus 2232PP 1-19, 1-25, 2-22 Cisco Nexus 2232TM 2-17 Cisco Nexus 2248TP 1-3, 1-12, 2-13 Cisco Nexus 2248TP-E 2-4 Cisco Nexus 2000 Series Hardware Installation Guide IN-5
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 158
    replacing 3-17 power supply filler panel Cisco Nexus 2200 Platform 1-7, 1-14 pre-installation guidelines 3-2 options 3-2 unpacking the switch 3-4 R rack chimney type, considerations 3-3 open 3-2 requirements A-1 solid walled 3-2 rack-mount IN-6 Cisco Nexus 2000 Series Hardware Installation Guide
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 159
    1-16, 2-14, 2-28 Cisco Nexus 2248TP-E 2-9 FET 2-9, 2-14 Cisco Nexus 2224TP 2-28 Cisco Nexus 2232PP 2-24 Cisco Nexus 2232TM 2-19 replacing 4-2 transceivers, supported SFPs. See SFP transceivers troubleshooting best practices E-2 OL-19013-05 Cisco Nexus 2000 Series Hardware Installation Guide IN-7
  • Cisco SLM2024T-NA | Hardware Installation Guide - Page 160
    Index IN-8 Cisco Nexus 2000 Series Hardware Installation Guide OL-19013-05
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Cisco Nexus 2000 Series Hardware
Installation Guide
August 22, 2012
Text Part Number: OL-19013-05