Cisco SPA112 Quick Start Guide

Cisco SPA112 Manual

Get Cisco SPA112 PDF manuals and user guides View all Cisco SPA112 manuals
Add to My Manuals
Save this manual to your list of manuals

Cisco SPA112 manual content summary:

  • Cisco SPA112 | Quick Start Guide - Page 1
    Quick Start Guide Cisco SPA100 Series Analog Telephone Adapters SPA112 Two Port Phone Adapter SPA122 ATA with Router Package Contents • Analog Telephone Adapter • Ethernet Cable • Power Adapter • Quick Start Guide • Product CD-ROM
  • Cisco SPA112 | Quick Start Guide - Page 2
    choosing a Cisco SPA100 Series Analog Telephone Adapter. This product family includes the following models: • SPA112 Two-Port Phone Adapter: 2 FXS ports and 1 10/100 WAN port. • SPA122 ATA with Router: 2 FXS ports, 1 10/100 WAN port, 1 10/100 LAN port, and built-in router. This guide describes how
  • Cisco SPA112 | Quick Start Guide - Page 3
    data through the WAN port. Off-No link. Steady green-System ready, IP address acquired. Slow flashing green-Acquiring IP address. (By default, uses DHCP.) Fast flashing green-Upgrading firmware. Off-No power or system can not boot up. Back Panel Feature Description Reset Using a paperclip or
  • Cisco SPA112 | Quick Start Guide - Page 4
    or fax machine. Connect the other end to the Phone 2 (Gray) port. STEP 3 SPA122 Only: Optionally, connect one end of an Ethernet network cable to the ETHERNET (Yellow) port of the ATA. Connect the other end to a device on your network, such as a computer. STEP 4 Connect the provided power adapter to
  • Cisco SPA112 | Quick Start Guide - Page 5
    • SPA112: Use the ATA's IVR or your router's configuration utility to find the dynamically assigned IP address of the ATA. For information about the IVR, see Using the IVR for Administration, page 6. • SPA122: In the Address bar, enter: 192.168.15.1 Note: 192.168.15.1 is the default local IP address
  • Cisco SPA112 | Quick Start Guide - Page 6
    Using the IVR for Administration An IVR system is available to help you to configure and manage your ATA. You can use the telephone keypad to select options and to make your entries. To access the IVR menu: STEP 1 Connect an analog phone to the Phone port of the ATA. STEP 2 Press the star key four
  • Cisco SPA112 | Quick Start Guide - Page 7
    Enter IVR Menu **** Check Internet Connection 100 Type Set Internet Connection Type 101 Check Internet IP Address 110 (WAN port) Set Static IP Address (WAN) 111 Check Network Mask 120 Set Network Mask 121 Check Gateway IP Address 130 Choices and Instructions DHCP: 0 Static IP: 1 PPPoE
  • Cisco SPA112 | Quick Start Guide - Page 8
    : Check LAN IP address (Ethernet port) Announce Line 1 SIP Transport Set Line 1 SIP Transport 170 210 1910 1911 Check Line 2 SIP Transport 1920 Set Line 2 SIP Transport 1921 Exit IVR 3948 Allow or prevent WAN access 7932 to the administration web server Choices and Instructions To enter the
  • Cisco SPA112 | Quick Start Guide - Page 9
    RESET settings will be lost. This includes network and service provider data. Reboot of Voice System 732668 REBOOT User Factory Reset of Unit 877778 WARNING: All userchangeable non-default settings will be lost. This may include network and service provider data. Choices and Instructions
  • Cisco SPA112 | Quick Start Guide - Page 10
    Recommended hardware (not included): Two number-six pan-head tapping screws, 5/8-in. length, with anchors for sheet rock installation. 5/8 in. (15.8 mm) WARNING Insecure mounting might damage the ATA or cause injury. Cisco into the wall-mount slots. 10 Cisco SPA100 Series Analog Telephone Adapters
  • Cisco SPA112 | Quick Start Guide - Page 11
    Resources Phone Support Contacts www.cisco.com/go/sbsc Cisco Small Business Firmware Downloads www.cisco.com/go/software Cisco Small Business Open Source Requests www.cisco.com/go/smallbiz_opensource_ request Product Documentation Cisco Small Business Analog Telephone Adapters www.cisco.com
  • Cisco SPA112 | Quick Start Guide - Page 12
    CA 95134-1706 USA www.cisco.com Small Business Support, Global: www.cisco.com/go/sbsc 78-19933-01 Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/ trademarks. Third
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
Quick Start Guide
Cisco SPA100 Series Analog Telephone
Adapters
SPA112 Two Port Phone Adapter
SPA122 ATA with Router
Package Contents
•
Analog Telephone Adapter
•
Ethernet Cable
•
Power Adapter
•
Quick Start Guide
•
Product CD-ROM