Cisco SPA303 User Manual - Page 20
(Optional) Installing the Cisco SPA 303 Stand, (Optional) Connecting a PC to Your Cisco SPA 303 - desk stand
View all Cisco SPA303 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Installing Your Phone Installing Your Cisco SPA 303 IP Phone 2 (Optional) Installing the Cisco SPA 303 Stand NOTE Do not attach the desk stand if you want to mount the phone to the wall. STEP 1 Connect the phone stand by lining up the tabs on the stand with the slots on the phone body. STEP 2 Slide the bottom tabs into the lower slots on the phone body (labeled 1 in Figure 3) and lightly press down on the stand. It should easily slide into the upper stand slots. Do not force. (Optional) Connecting a PC to Your Cisco SPA 303 To connect a PC to your phone (optional): NOTE Cisco does not recommend connecting a PC to the phone when it is operating wirelessly. STEP 1 To provide network access to a PC, connect one end of an additional Ethernet cable (not provided) to the PC port on the back of the phone body (labeled 2 in Figure 3.) STEP 2 Connect the other end of the Ethernet cable to the network port on your PC. (Optional) Connecting Wired and Wireless Headsets The Cisco SPA 303 supports headsets from different manufacturers. For the latest supported models, contact your reseller. Additional information can be found at the manufacturer's websites: http://www.plantronics.com http://www.jabra.com Each brand and type of headset may require different steps for connection. Consult the documentation for your particular headset for more information. Cisco Small Business IP Phone SPA 30X User Guide (SPCP) 18