Cisco SPA525G Administration Guide - Page 101
STEP 1, Parameter, Description, Admin Login, advanced, SDP Payload Types, Submit All Changes
UPC - 882658261688
View all Cisco SPA525G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Configuring SIP, SPCP, and NAT Configuring SIP 5 To configure SDP payload types: STEP 1 Log in to the web administration interface. STEP 2 Click Admin Login and advanced. STEP 3 Click the SIP tab. STEP 4 Under SDP Payload Types, configure the fields shown in the following table and click Submit All Changes. Parameter AVT Dynamic Payload INFOREQ Dynamic Payload G726r16 Dynamic Payload G726r24 Dynamic Payload G726r32 Dynamic Payload G726r40 Dynamic Payload Description AVT dynamic payload type. Ranges from 96-127. Defaults to 101. This parameter defines the Codec Number used in the SIP messaging for the Dynamic Payload size mechanism. This number should match the number configured in the network/other party to enable the use of Dynamic Payload. The best range is 96-127 for any dynamic payload type. Defaults to blank. G.726-16 dynamic payload type. Ranges from 96-127. Defaults to 98. NOTE Not applicable to SPA525G. G.726-24 dynamic payload type. Ranges from 96-127. Defaults to 97. NOTE Not applicable to SPA525G. G726r32 dynamic payload type. The default is 2. G.726-40 dynamic payload type. Ranges from 96-127. Defaults to 96. NOTE Not applicable to SPA525G. Cisco SPA and Wireless IP Phone Administration Guide 99