Cisco SPA525G Administration Guide - Page 165

Configuring Regional Parameters and Supplementary Services Using a Dial Plan 8 Parameter Description Dial Plan Dial plan script for the selected extension. The dial plan syntax allows the designation of three parameters for use with a specific gateway: • uid - the authentication user-id • pwd - the authentication password • nat - if this parameter is present, use NAT mapping Separate each parameter with a semi-colon (;). See the Cisco SPA9000 Voice System Administration Guide for more detailed information on dial plans. Caller ID Map Inbound caller ID numbers can be mapped to a different string. For example, a number that begins with +44xxxxxx can be mapped to 0xxxxxx. This feature has the same syntax as the Dial Plan parameter. With this parameter, you can specify how to map a caller ID number for display on screen and recorded into call logs. NOTE Not applicable to WIP310. Enable IP Dialing Enable or disable IP dialing. Defaults to no. Emergency Number Enter a comma-separated list of emergency numbers. When one of these numbers is dialed, the unit disables processing of CONF, HOLD, and other similar softkeys or buttons to avoid accidentally putting the current call on hold. The phone also disables hook flash event handling. Only the far end can terminate an emergency call. The phone is restored to normal after the call is terminated and the SPA9X2 is back on-hook. Maximum number length is 63 characters. Defaults to blank (no emergency number). NOTE Not applicable to WIP310. STEP 5 Click Submit All Changes. Cisco SPA and Wireless IP Administration Phone Guide 163