Cisco SPA525G Administration Guide - Page 185
SPA932 Parameter Notes, Configuring the SPA932 Attendant Console, Parameter, Description
UPC - 882658261688
View all Cisco SPA525G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
Configuring the SPA932 Attendant Console Setting Up the SPA932 Attendant Console 9 STEP 5 In the BLF List URI field, enter the URI to generate BLF keys: [email protected];vid=2 Where: • listname: Name of the list. • domain.com: Name of the domain. • vid: Assigns keys to the extension. By default, the SUBSCRIBE is sent when "Ext 1" is registered. You must set the "vid=" to a different value to change this behavior. For example: [email protected];vid=2 STEP 6 Click Submit All Changes. SPA932 Parameter Notes Parameters in the SPA932/Attendant Console web page are described in the following table. For information about Unit/Key syntax, see the previous sections. . Parameter Subscribe Expires Subscribe Retry Interval Unit 1 Enable Subscribe Delay Unit 2 Enable Description Specifies how long the subscription remains valid. After the specified period of time, elapses, the SPA932 initiates a new subscription. Defaults to 1800. Specifies the length of time to wait to try again if subscription fails. Enables or disables the first SPA932 unit (each phone can have up to two SPA932 units attached). Length of delay before attempting to subscribe. Defaults to 1. Enables or disables the second SPA932 unit (each phone can have up to two SPA932 units attached). Cisco SPA and Wireless IP Phone Administration Guide 183