Cisco SPA525G Administration Guide - Page 258
Multiple delay settings Referor, Refer Target, Referee
UPC - 882658261688
View all Cisco SPA525G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 258 highlights
SPA and Wireless IP Phone Field Reference Ext Tab B Parameter Auth Resync-Reboot SIP Proxy-Require SIP Remote-Party-ID Referor Bye Delay Refer-To Target Contact Referee Bye Delay Description If this feature is enabled, the SPA9000 authenticates the sender when it receives the NOTIFY resync reboot (RFC 2617) message. To use this feature, select yes. Otherwise, select no. Defaults to yes. The SIP proxy can support a specific extension or behavior when it sees this header from the user agent. If this field is configured and the proxy does not support it, it responds with the message, unsupported. Enter the appropriate header in the field provided. To use the Remote-Party-ID header instead of the From header, select yes. Otherwise, select no. Defaults to yes. Controls when the SPA9000 sends BYE to terminate stale call legs upon completion of call transfers. Multiple delay settings (Referor, Refer Target, Referee, and Refer-To Target) are configured on this screen. For the Referor Bye Delay, enter the appropriate period of time in seconds. Defaults to 4. To contact the refer-to target, select yes. Otherwise, select no. Default: no For the Referee Bye Delay, enter the appropriate period of time in seconds. Defaults to 0. Cisco SPA and Wireless IP Phone Administration Guide 256